Flow meter, 0 – 15 LPM air

Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Graduation shall have over 270 degrees of visibility.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Pressure compensated design to give specified accuracy for whole range of input pressures
Built-in inlet filter (depending on supplied model).
Inlet and outlet connectors DISS style, other types of connectors available upon request
Can be cleaned with damp cloth and a disinfection solution.
Needle valve and body constructed of brass or aluminium.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Maximum flow rate when fully opened: 50 L/min (depending on supplied model).

ENVIRONMENTAL CONDITIONS
Storage conditions (packaged): -40 to 60 deg. C, 5 to 95% relative humidity, non-condensing
Operating conditions: -20 to 60 deg. C, 10 to 95% relative humidity, non-condensing

WEIGHT/VOLUME (packaged):
Volume: 1 dm3
Weight: 0.213 kg.