Water distribution kit,6 taps

Four sturdy legs (or two "A" frames), each leg fitted with a drilled plate for holding down purposes.
1 central, horizontal distribution pipe.
6 x Male threaded tap pipes welded to the central distribution pipe.
7 x Female threaded ¾" (20 mm) self-closing taps. Minimum discharge rate per tap: 10 liters per minute at one meter head, operation range: Up to 4 bars.
1 x 1 ½" (40 mm) male threaded riser pipe.
1 Female threaded 2"-1 ½" (50 mm-40 mm) junction tee with closing(for the connection to the storage tank or to other tap stands).
2 male threaded Guillemin or Storz couplings.
x ¾" (20 mm) female threaded caps (for closing in case of repair of repair of faulty taps).
4 rolls of teflon tape (12 mm x 12 meters each).
1 piece of wire netting for concrete slab, 0.9 x 1.5 meters each.(Smaller pieces could be supplied to minimize the shipping volume, provided that the necessary overlapping of the net reinforcement is taken into consideration).
4 plated pegs for fixing down of the tap stand, each 30 cm long, minimum diameter 12 mm.

1 length of 6 meter semi rigid hose, for the conveyance of water, plasticized PVC abrasion resistant hose, ozone and weather resistant, smooth bore, fitted with a shock resistant rigid PVC spiral, 50 mm diameter, each end fitted with 2 x 50 mm Guillemin couplings.
Collars
2 x 50 mm hose clips.
2 x Spanners for Guillemin couplings.
1 x Disposable spanner for tightening of collars.