CO2 Incubator

CO2 Incubator

CO2 Incubator
CO2 incubators are most frequently used in medical research and the pharmaceutical industry. However, they also provide sterile conditions for cultivation in other fields where cells grow in a completely germ-free environment.
General Features and Specifications
It is incorporates advanced technologies and superior design to provide an ideal, stable culturing environment
The operational gas pressure range of 8 to 20 psi
The dry heat sterilization is 125ºC
Equipped with Water jacket or direct heat temperature control
The dry heat sterilization time is 4 hour or less
Possess provision of display for temperature and alarm control
The inner chamber material is made up of stainless steel
Inner chamber is easily cleanable
Equipped with high temperature decontamination
Standard perforated shelves
Number of shelves provided is 3
Shelves is made up of stainless steel
Shelves thickness is 1mm
Separate inner glass door is provided
Removable humidity tray for easy cleaning
Sensor used CO2 detection is thermal conductivity (TC) or Infra-Red (IR) Two CO2 cylinder is provided with incubator
Type of configuration is portable and bench top
Inside compartment is Scratch resistant high impact painted finish for easy cleaning
Closes gently against the cabinet with a magnetic gasket and maintains chamber integrity
Reinforced cabinet permits stacking and tempered glass inner door
High visibility vacuum fluorescent display for at-a- glance monitoring from across the room
Power supply: 220 -240 V
Supported with stainless steel shelves
Technical Specifications:
Microprocessor controlled 170 Liters direct heats stackable CO2 Incubator temperature control from 4° C above ambient to 50°C, with control accuracy ±0.1°C and with high temperature decontamination at 120 °C
It has six-sided direct heating with finless, gentle convection circulation to provide stable temperature control, excellent uniformity and rapid recovery with no over shoot
It has CO2 control range from 0.2 to 20% with control accuracy and uniformity of ±0.1% and has rapid recovery of at least 0.7% per minutes
It has Infra-red (IR) CO2 sensor It come with 4 adjustable height shelves & humidity reservoir (removable) to achieve at least 95% RH.
It has independent door heater eliminate condensation on inner door surface
It has HEPA filter on CO2 inlet; it has 25mm access port.
 The incubator offers a range of solutions to meet your specific culturing requirements and preferences
Equipped with infrared (IR) sensor based on CO2 regulation for precise automatic CO2 control under frequent temperature and humidity change
Temperature management ambient +5°C to 60°C
The CO2 recovery rate is 6 min or less after door opening and closing event to attain 5% CO2
Provide incremental increase for temperature management: 0.1 °C
Temperature accuracy is between + 0.4 ºC at 37 ºC
Stability is between + 0.2ºC at 37 ºC
CO2 gas range is 0.5 – 50%
Incremental variation in CO2 gas range of 0.10%
The internal capacity is up to 200-350 liters
Temperature for sensor functionality is 140 ºC during dry heat sterilizations.
Temperature Uniformity control: ±0.4°C@37°C(98.6°F)
Temperature control supported with tracking alarm: User-programmable high/low
CO2 Control Better than ±0.1%
Readability & Stability 0.1%
CO2 Sensor TC: thermal conductivity (TC) or infrared (IR) sensors
Humidity Source: 1.5 gal standard/pan
Calibration
Suitable for regular external calibration at different selectable temperature values (5 points)
CO2 gas cylinder, Gas level, time and temperature control and display
Need to be equipped with CO2 Gas Hookups(for connecting CO2 tanks to incubators), CO2 Monitoring system, data logger for continuous/regular temperature, gas level monitoring , with a print out.
CO2 Monitoring CO2 gas sensors (Infra-red (IR) CO2 sensor)
HEPA filter on CO2 inlet ( with one extra for each incubator)
CO2 Gas cylinder with gas regulators and CO2 gas sensors
CO2 Gas Hookups(for connecting CO2 tanks/cylinder to incubators)
Inert and leak free CO2 piping tubes
Appropriate/compatible incubator disinfectants
Need to supply pure CO2 gas cylinder for each ?CO2 incubator? with the following specifications:
Purity of Co2 gas >99.5%
Moisture : <20 ppm v/v
Carbon Monoxide : <10 ppm v/v
Cylinder internal volume: 50 L
Cylinder material: Stainless steel
Certificate of Analysis ( COA) need to be presented for CO2 gas
Contamination and control
Need to be supported with software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). Need to be supported with USB stick software control and required accessories
Fittings and Shelves
Fittings:- Access Port: 1.3"(3.3cm)with removable silicone plug with filter CO2 Inlet 1/4"hose(barbed)
Shelves
Shelf dimensions (W x L) inch: 12 – 15 x12 -15.0 Construction: Stainless steel, perforate
Dimension, weight and capacities
Interiordimensions(WxDxH): 450-490 x 450-550 x 550-690mm / 18-20 x 20-25 x 20-30 inch
Exteriordimensions(WxDxH) 550- 630 x 650-750 x 850-950mm / 20-28 x 25-30 x 30- 40 inch
Volume 180-250 Liters
Net weight 100 -250kg
System Configuration Accessories, Spares, Consumables and other Components for each CO2
Incubator
CO2 Incubator unit
CO2 MonitoringCO2 gas sensors (Infra-red (IR) CO2 sensor)
HEPA filter on CO2 inlet ( with one extra for each encubator)
CO2 Gas cylinder with gas regulators and CO2 gas sensors
CO2 Gas Hookups(for connecting CO2 tanks/cylinder to incubators)
Inert and leak free CO2 piping tubes
Appropriate/compatible incubator disinfectants
Stainless steel shelves
Need to be supplied with standard accessories, spare parts, and consumables that can able to make the incubator complete function/operating
All necessary accessories need to be clearly identified with quantity and unit price along with the main equipment CO2 /incubators
Operating Environment;
Temperature: +10 °C to + 32°C
Relative humidity: Ambient to 95% at 37°C(98.6°F)
Altitude:- 2300-2400 meter
Utility Requirements: Voltage: 220VAC, + 10% , 50Hz.