Single-use, sample collection and measuring microcuvette.
Capillary, venous and arterial whole blood can be used.
Collects 5 to 10uL capillary whole blood directly from the skin surface by capillarity.
Box of 100 microcuvettes , in plastic vial, with screw cap.
Inserted for direct reading into S0000590, Photometer,HemoCue glucose 201+/set.
Supplied with instruction manual in English, French, Spanish.
Multi-wavelength photometric measurement at chemical reaction end-point (667 nm - maxi absorbance point, and 840 nm - turbidity compensation).
Provides direct reading from inserted micro-cuvette.
Automated point-of-care device for measuring glucose in capillary whole blood.
Technology: optical absorption and reflectance photometry.
Sample size: 5 to 10uL capillary, venous or arterial whole blood.
Sample collected directly from skin surface into single-use microcuvette by capillary action.
Uses dedicated microcuvette (closed system).
Removable microcuvette holder to allow for easy cleaning.
Correlation with reference laboratory measurements: 0.99
Factory calibrated and continuous built-in auto self-test (when switched on). Needs no further calibration.
Measuring range: 0 to 500 mg/dL.
Read-out in: mg/dL or mmol/L.
Reading time: 40 sec. to 4 min.
Interfaces: RS 232 to printer or computer.
Power supply: 220V /50 or 4 x type AA / R6 1.5 V batteries (allowing for 100h to 150h continued usage).
Display informs: glucose reading, reading errors, systems errors, battery status.
Symbols in display facilitate multi-lingual understanding.
Built-in memory, storing > 400 measurements.
Supplier’s product reference: HemoCue Glucose 201+ analyzer starter set/kit.
Used for multiple techniques to accurately dispense required volumes of liquid.
A handle with digital setting and read-out of delivered volumes
Autoclavable, and Resistant to UV sterilization
Built-in tips ejector
Manual air displacement micropipette
Single channel, adjustable pipetting volumes 20-200ul
Compatible with universal fit pipette tips ranging 20-200ul
Sturdy and chemical resistant parts.
Decal, equipment, permanently adhesive
Roll of 50
Material: White gloss PVC with permanent adhesive, 0.1mm thickness, lifespan 2-3 years from date of delivery, Kraft liner 67 grams.
Base color: 100% Cyan blue. The logo are printed in white, and positioned in the middle of the decal, running 80% of the length.
Decal, rectangular, 205 x 105mm, roll of 50 decals
Size: Rectangular, length 205 mm x height 105 mm, with corners in a 90-degree angle.
Due to the size and complexity of the system, in many aspects the operating behaviour corresponds to that of actual large-scale plants, thereby enabling training that is as close to the real thing as possible. The Steam Power Plant is specifically designed for training purposes in the field of power plant engineering with process control systems. The plant consists of four separate modules and can therefore be flexibly adapted to the space available in the laboratory:
The feed water circuit is equipped with a water treatment system with ion exchangers and chemical dosing. Module A steam generator assembly: a gas/oil-fired once-through steam boiler and a downstream electric super heater generate superheated steam.
Features:
Plant monitored and controlled via touch screen control station
Complete steam power plant with process control system based on Ethernet and PLC.
Decal, round, permanently adhesive, on square sheet.
Material: White gloss PVC, with permanent adhesive; 0.1mm thickness; lifespan 2-3 years from date of delivery; Kraft liner 130 grams.
Color: Background colour; cyan blue. The printed in white, positioned in the middle of the decal, running 80% of the diameter. Outside format: White background, with instructions printed in cyan blue lettering.
Size: Die-cut to diameter 205 mm, delivered in squares with instructions printed in cyan blue lettering on the white outside format.
The kit is designed to cater for up to 90 children playing simultaneously.
The previous Recreation Kit was reviewed and the contents revised.
Recreation kit with 26 components packed in 1 lockable metal box.
Used for multiple techniques to accurately dispense required volumes of liquid.
8-channel, adjustable pipetting volumes 20-200ul
Compatible with universal fit pipette tips ranging 20-200ul
Autoclavable, and Resistant to UV sterilization
Manual air displacement micropipette
A handle with digital setting and read-out of delivered volumes
Built-in tips ejector
Sturdy and chemical resistant parts.
The kit aims to provide a range of activities to encourage the development and social interaction of children (playing, story-telling, numeracy, etc.) with materials also provided for caregivers. The kit is designed to be used by 50 children (aged 0 to 6) at one time and is suitable for indoor and outdoor use. In addition, the kit provides water and sanitation items for the improved health and awareness of children.
The Early Childhood Development Kit with 43 components packed in 1 lockable metal box. The previous ECD Kit was reviewed and the contents revised.
The water level indicator consists of a flat, two cores, heavy duty cable calibrated in metres and centimetres on one side.
Water level depth indicator, battery powered (3 x 1.5 V, included and easily replaceable), for use in boreholes to a maximum depth of 200 metres.
A stainless-steel probe is securely fastened to the free end of the cable and the cable with probe is attached to a cable winding reel. Measurements are taken by slowly lowering the cable with probe down the borehole until the probe comes in contact with the water. On contact with the water, the unit emits a high frequency audible signal, and the user can then take a depth reading from the calibrated cable.
The unit is also equipped with an optical (light) signal that switches on upon contact of the probe with water.
The hydraulic system applies either a tensile or compressive loading to specimens. Extension of the specimen is monitored using an extensometer for work on stress/strain curves and the Modulus of Elasticity. This Universal Material Tester is a bench top unit for training purposes. The applied force to the specimens is created using a digital pressure sensor and shown on the Digital Interface supplied. An elongation sensor is also supplied for use in bending, compressive and shear testing. Simple operation and robust construction make the unit suitable for student experiments. The round threaded tensile specimens are installed between upper and lower fixings using the mating threads in each fixing. A wide variety of options are also available. Data Acquisition Software is supplied as standard to enable the test parameters to be captured, displayed, reviewed and printed.
Experimental Capabilities:
Tensile Strength Percentage Elongation
Tensile and Compressive testing Recording of stress-strain diagrams Modulus of Elasticity testing.
Used for multiple techniques to accurately dispense required volumes of liquid
12-channel, adjustable pipetting volumes 20-200ul
Compatible with universal fit pipette tips ranging 20-200ul
Autoclavable, and Resistant to UV sterilization
Manual air displacement micropipette
A handle with digital setting and read-out of delivered volumes
Sturdy and chemical resistant parts
Built-in tips ejector.
Vaccine storage capacity: 20 litres
Cold box, Large, Long range
With hinged lid and carrying handles.
Cold life at 43°C without openings: 134.6 hours
Supplied with 24 x 0.6L icepacks, as a standard.
Weight fully loaded: 38.9 Kg.
A solid understanding of the properties of materials is essential for technical and scientific professions. The materials test provides the necessary data in a reproducible and precisely quantified manner. This knowledge helps select the suitable material, monitor production and processing and ensure the requirements in terms of a component. The tensile test, bending test and hardness test are all part of classic destructive materials testing.
Features:
Compact, simple experimental unit for basic destructive tests
Tensile tests, Brinell hardness test
Learning Objectives And Experiments:
Tensile tests
Together with the accessories
Compression tests
Bending tests
Plot stress strain diagrams
Brinell hardness test
Testing of plate and coil springs
Cupping tests
Shear tests.
School-in-a-box kit 2016, for 40 students and 1 teacher with 42 components packed in 1 lockable metal box.
It is expected that the materials in this kit are sufficient for 3 months.
The previous School in a Box was reviewed and the contents revised.
Blood collection needle for use with vacuum tubes. For use in clinical phlebotomy.
Blood collection needle.
Sterile, individually packed in a twist-apart plastic container.
Material; Medical grade stainless steel.
Length approx. 40 mm
Diameter 20 G (0.9 mm)
Applicable for multi-sample draw.
Needle fits (screw in and out) needle holder.
Pointed at both ends, with rubber sleeve on the posterior end needle.
Save time and eliminate errors - no need for dilution
All concentrations of Turbidity Standards are verified to meet tight quality control specifications, for reporting purposes and guaranteed to save you time.
As a primary standard, Turbidity Standards can be used to calibrate or verify any turbidimeter.
EPA approved primary turbidity standard.
Long shelf life.
Digital Multimeter (AC 500V, DC 500V, 200MΩ)
....
Save time and eliminate errors - no need for dilution
Long shelf life
EPA approved primary turbidity standard
As a primary standard, Turbidity Standards can be used to calibrate or verify any turbidimeter.
All concentrations of Turbidity Standards are verified to meet tight quality control specifications, for reporting purposes and guaranteed to save you time.
Vaccine storage capacity:200L
Volume category: >120L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Operating temperature: Min and Max rated ambient temperature: +5°C and +43°C
UIFPF: Grade A
PQS prequalified Solar direct drive refrigerator with no battery for storage of vaccines at +2?C to+8?C in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Refrigerant: R600a, 65 grams.
