The interior mechanical structure and function of front drive axle is clearly understood under its demonstration and operation. F Drive Bridge Module Model is perfect teaching equipment for colleges, secondary vocational and technical schools, truck driving training and vehicle repairing field.
....
F coverall is made of barrier film laminated to substrate
For use when potential exposure to industrial chemicals and chemical warfare agents exists
Widely used by military personnel and first responders for chemical warfare situations
Provides protection against over 180 chemical challenges for at least 30 minutes
Strong and durable coverall with broad chemical barrier
Front zipper closure and storm flap with tape closure
Elastic wrists and elastic ankles.
Available in low-visibility gray fabric for discretionary purposes
With taped seams and attached hood (respirator fit).
-lab-517147189.jpg "F Taped Seam Coveralls (TAA Compliant)")
Widely used by military personnel and first responders for chemical warfare situations
Provides protection against over 180 chemical challenges for at least 30 minutes
Strong and durable coverall with broad chemical barrier
With taped seams and attached hood (respirator fit)
Front zipper closure and storm flap with tape closure
Elastic wrists and elastic ankles.
F coverall is made of barrier film laminated to substrate
For use when potential exposure to industrial chemicals and chemical warfare agents exists
Available in low-visibility gray fabric for discretionary purposes.
It comes as powder packed in a canister to prepare a liquid therapeutic diet with an energy density of approximately 100 kcal/100ml. Therapeutic milk diet with added vegetable fat, carbohydrates, vitamins and minerals.
....
The Vice is made out of steel Fabricated
Corrosion Resistant Nickel Plated Handle
Hardened Serrated Jaws Made of Special alloy steel
360 degree Swivel Base.
Nut in Housed in body and gives long service.
Allows for precise oxygen delivery by utilizing different sized ports to change FiO2 (24 – 60%). Face mask to provide oxygen at flow rates up to 12 LPM. Also known as air-entrainment masks able to provide total inspiratory flow at a specified FiO2.
....
Face mask to provide oxygen at flow rates up to 12 LPM. Allows for precise oxygen delivery by utilizing different sized ports to change FiO2 (24 – 60%). Also known as air-entrainment masks able to provide total inspiratory flow at a specified FiO2.
Allows for precise oxygen delivery, with specific concentrations ranging from 24-60%.
The kit of the mask includes the tubing, humidity cup and multiple jets, which are color-coded and indicate the percentage of oxygen.
Mask is soft, transparent, with well-fitting mould.
The nose clip is adjustable.
The tubing is terminated with standard or universal hose end connector.
Individually packed.
Tubing compatible with standard oxygen connection tubing.
Tubing length: 2 meters
Non-sterile.
Child size.
Single use.
Face Shields are lightweight and comfortable. They provide protection from splashing liquids, blood, and other bodily fluids and are ideal for use in laboratories, medical settings, dentistry, and veterinary medicine
High-quality, optically clear disposable face shield
Anti-fog and non-glare design
Flexible construction with comfortable polyurethane foam headband
Medical face shield
Optical grade PET construction
Secures to head with elastic band
Class 2 Medical Device, 510(k)
Latex free.
Single use full face length safety shield, fog-resistant. Encloses a wide area of the face ear-to-ear and forehead to chin. Can be worn with glasses or goggles.
....
Durable, transparent, fog-resistant, full face length safety shield. Can be worn with glasses or goggles. Reusable. Encloses a wide area of the face, ear-to-ear and forehead to chin.
Intended use: To provide full face cover, to protect healthcare workers from body fluid and chemical splashes.
Made with .10mm thick single ply pvc
Elastic waist pant for easy on and off
Detachable hood with drawstring
Jacket with detachable hood and corduroy collar
Adjustable snaps at wrists and ankles for better fit
Storm flap front
Underarm vents
Two-flapped pockets
Yellow.
Measurement of oxygen concentration, temperature and flow rate
2 hand-held measuring units for measuring the oxygen concentration upstream and downstream of the absorption column
Falling film column for the absorption of oxygen from the ambient air in a solvent (water)
Counter flow process
Continuous regeneration of the solvent with nitrogen in a desorption column by stripping
Pump for recirculating the solvent to the absorption column
1 compressor for supplying ambient air into the falling film column
Pump for desorption column.
The experiment module may be used both to heat rooms and to absorb ambient heat from the outside air. It can thus be operated as either a heat sink or a heat source for a heat pump. Experiment module consisting of a fan convector with piping, quick-release couplings and temperature sensors. This advantage makes it possible to operate room heating with lower temperatures in the heating circuit. In the case of heating rooms, compared to traditional heating radiators, fan heaters offer the possibility of achieving a comparatively good transfer of heat to the room air, even at small dimensions. When combined with a heat pump, the fan heater therefore often represents a beneficial application both economically and in terms of energy, especially when renovating heating systems in old buildings.
The disadvantage of the energy balance, particularly unfavourable in winter, in this case is contrasted with the advantage of lower initial investment costs. When absorbing ambient heat to supply heat to a heat pump, air heat exchangers are often used when there is no access or difficulty accessing other heat sources such as groundwater or geothermal heat collectors.
The Fan Speed Control Trainer circuits use the same wire colors as the manufacturers wiring diagram. Students follow printed schematics to wire up either a single-speed single fan system or a two-speed two fan system. Incandescent bulbs are substituted in place of the actual cooling fan motors for safety purposes. Fan Speed Control Trainer presents the hands-on construction, study and live operation of a modern Fan Speed Control System as found on late-model General Motors vehicles.
....
The centrifugal fan which has a low chord impeller and split volute diffuser casing is directly driven by a DC dynamometer giving a variable speed from 0-4000 rpm, with a swinging stator providing load cell torque measurement and equipped with a toothed wheel for speed measurement. The bench consists of a welded steel frame mounted on castors providing two work surfaces for experiments together with ample storage space for experimental apparatus when not in use. The working surfaces accommodate a control console and a centrifugal fan with variable speed dynamometer drive, to which can be coupled a series of inlet and outlet ducts. The control console houses all electrical components and circuitry associated with the power and speed control, while the instrument panel includes: START/STOP pushbuttons, speed control knob and torque, speed, armature voltage and current displays. The ductwork supplied with the bench is manufactured in aluminium sections assembled by deep spigoted sockets, sealed by O rings. It includes a venturi nozzle, a bell mouthed inlet, flow straighteners, pressure tapping points and disc valves and is designed to allow assembly to various configurations by means of quick release toggle latches. A dual multi-slope manometer scaled 0- 5 and 0-2.5 kPa is supplied for use with the air flow nozzle.
....
The power consumption: 70w;
The power supply voltage: AC 220V;
Product volume: 300*200*600.
Many parts have been chromium-plated and galvanized for a longer life. Farm Tractor Four WD Massey Ferguson Landini Cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, fuel system, lubricating circuits, cooling system etc.
....
It is used to measure how fast a trolley moves and conclude formula of object speed.
....
