The Vice is made out of steel Fabricated
Corrosion Resistant Nickel Plated Handle
Hardened Serrated Jaws Made of Special alloy steel
360 degree Swivel Base.
Nut in Housed in body and gives long service.
Flood Lighting Set is lighting equipment offered consists of four sealed beam flood lamps each housed in an aluminium body. Flood Lighting Set is essential to have the experimental area within the frame well lit. Flood Lighting Set lamp units slide in a 3.6 metre long track supported 1 metre from the front edge of the MAGNUS frame with cantilever brackets.
A mains connector and 6 metres of cable complete the assembly.
Specification:
A 3.6 m lighting track supplied at 1 m from top edge of MAGNUS frame
To be supplied with a mains connector and 6 m of cable
Four flood lamps in fittings that slide in the track.
Security Lights Photocells Sensor
....
Photoelastic analysis is achieved by passing light through the mechanical stress models while a tensile load is applied. The frame has the Transmitted Light Polariscope filter and quarter wave plate mounted to rotational frames. The Transmitted Light Polariscope is a bench top mounted frame which allows the study of stress patterns and photoelasticity resulting from geometrical changes in loaded mechanical models. Transmitted Light Polariscope can be vertically or horizontally mounted onto the light box. These frames allow the rotational angle of the plates and filters to be adjusted and hence vary the colourisation seen by the user. Rubber mounting feet enable it to sit firmly onto the light source. The frame can sits in front of a light box which supplies monochromatic or white light.
Experimental Capabilities:
Photoelastic analysis of standard mechanical models
Tensile loading of beams, perforated beams, plates, overlap element
Variation of stress colourisation
Rotational position of wave plate and filters
Analysis of Crane hook under tensile load.
Traffic Light Control System Model
....
Autorange from 0 to 1100 NTU with accuracy of ±2% of reading or ±0.01 NTU
Water-resistant, ABS-injection molded housing maintains laboratory performance in field operations
Resolution varies with turbidity range: 0.01 NTU for 0–99 NTU range, 0.1NTU for 100–999.9 NTU range, and 1 NTU for 1000–1100 NTU range
Light source: tungsten
Maximum sample size: 10mL
Other field-friendly features include push-button calibration, four-digit (seven-segment) LCD display, and long life—performs over 1000 tests on a single set of four “AAA” alkaline batteries
Response time: 14 seconds
Material of the simulator: Thermoplastic polyurethane - TPU (primary material for body skin), Polyvinylchloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, polypropylene - PP, and iron/steel.
Full term anatomically accurate newborn with umbilical cord.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
Complete childbirth simulator, light complexion, used for demonstration and practice of normal childbirth of single foetus and early postpartum management.
Normal vaginal delivery of single foetus;
Simulation will cover the following obstetric procedures:
Examination of placenta, umbilical cord and membranes during normal delivery
Cutting and clamping umbilical cord;
Early postpartum management;
Palpation of foetal fontanels;
The Car Lighting System Trainer allows learning the marks and graphic symbols of the electrical installation elements according and testing the resistance, the voltage and the power in the vehicle installation system. Complete with user manual that will allow teachers to develop their own experiments.
The Car Lighting System Trainer includes the following systems:
Direction indicators, hazard lights
Headlight lift regulator
Vehicle interior lighting
Wiper equipment
Window wash system
Passing lights, driving lights and parking lights
Fog lights
Brake and reversing lights
Vehicle horn sound.
Newborn simulator to facilitate learning complete newborn care,including cord cutting and ligation, as well as newborn resuscitation, light complexion
Simulator consists of a light skin manikin, that has an appearance and size of full term infant with umbilical cord.
Material of the simulator: Thermoplastic polyurethane - TPU (primary material for body skin), Polyvinylchloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, Polypropylene - PP, and iron/steel.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony asrelevant and suitable for simulation.
Simulator consists of a light skin manikin, that has an appearance andsize of approximately 32 weeks old premature infant, together with Breastfeeding Simulator and Preterm Wrap.
Material of the simulator: Vinyl, Silicone, Polyoxymethylene - POM, Poly vinyl chloride - PVC, Polypropylene - PP, Thermoplastic polyurethane – TPU.
Texture of the simulator: Soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea premature infant, feeling smooth / resilient / bony as relevant andsuitable for simulation.
Simulator is used tofacilitate learning preterm infant care, including thermal care and feeding support such as exclusive breastfeeding, alternative oral feeding and enteral feeding with nasogastric tube. Simulator, premature infant care, light complexion.
Can be used to practice:
Breastfeeding - proper positioning and attachment.
Skin-to-skin care
Cup feeding
Intragastric tube placement.
Direction angle mark: the circle of the polarizing plate has obvious direction and scale mark, and the scale and the figure are clear. Product is made up of partial film, seized the polarizer?Disc diameter is not less than 170mm, the effective diameter of polarizer and seized the polarizer is not less than 120 mm.Angle indicator, minimum angle of 1 degrees, 90 degrees for a large lattice, 5 degrees for a small lattice.
....
The structure of the electric control line components is plank and hanging box.
Device is provided with a voltage - and current leakage protector, which can make sure of the operators safety.
It can be used as electrical instrumentation and lighting circuits operating training device. And it can also be used in Labor Occupational Skill Testing departments, colleges, vocational school, and technical school of the early, middle and senior maintenance electrician skills assessment.
Training circuits and devices are connected to secure socket and highly reliable pistol inserted wire sheath structure.
All components are leaded to the terminals by wire. And apprentices just need to wiring on terminals.
It can be carry out process training and conduct trace walking.
Wireless Light Sensor
....
The dialogue between the semaphores of the two roads allows the alternation of the green signal as a function of the traffic intensity, while the pedestrian crossing is on request. The automatic control of the semaphore system is performed through PLC not with the normal cyclic timing: only the presence of at least one car determines the green signal of the relevant semaphore, allowing the transit of all the cars between the two detecting sensors. Smart Traffic Lights Simulator system represents a crossing between two one way streets, each controlled by a semaphore and provided with three pedestrian crossings with semaphores, too. The present cars are displayed through LED, whose control is assigned to an electronic circuit separated from the PLC.
....
Made of embossed polyethylene for excellent flexibility
Easy to wipe down and keep clean
Economical, disposable protection
Superior resistance to chemicals, oils, fats, and grease.
Green Laser Light Source
....
Made of embossed polyethylene for excellent flexibility
Easy to wipe down and keep clean
Economical, disposable protection
Superior resistance to chemicals, oils, fats, and grease
Greener Choice Claims
Environmental benefits include:
Recyclable.
Demonstration board using original componentsincluding headlights, side lights, indicators and spotlights.
The alternator ismotor driven via a special controller to demonstrate the charging circuit.
Self contained, fully operational AutomotiveLighting System, manufactured using real components.
The system is powered by a 12 V DC batteryfor the electrical circuit and by 240 V AC for the speed controlled motor.
