Oxygen concentrators are not suitable to be used as an oxygen source to other medical equipment providing respiratory support, such as ventilators, CPAP devices, High Flow Nasal Oxygen, etc.
Equipped with one oxygen outlet, provided with controllable flow meter.
Audible and visual alarms for low oxygen concentration (<82%) and power supply failure.
Provides a continuous, variable flow of concentrated oxygen (>82%) derived from room air, to a maximum rate 10 L/min.
Contains oxygen monitor to verify concentration.
Audible and visual alarms for high temperature, no flow rate and low/high pressure.
Power efficiency < 70 W/L/min.
Flowmeter continuously adjustable, with markings of at most 0.5 L/min intervals.
Flowmeter control allows shutting off flow (i.e. 0 L/min) by user.
Noise level <60 dB(A).
Digital meter that displays cumulative hours of device operation.
Flowmeter minimum flow rate of 2 L/min. Lower flow rates may be achieved by a combination of the concentrator and a separately supplied flow splitter.
Oxygen outlet(s) with 6 mm (¼-inch) barbed fitting and DISS connector.
Electrical characteristics
Capacity for safe operation from at least ± 10% of rated voltage.
Electrical protection by resettable circuit breakers, fitted in both neutral and live lines.
Electrical power requirements are locally compatible.
230 Volt, 50 Hz, 3.0 amps (120 Volt units available)
Mains power cable length > 2.5 m.
Casing and environment
Hard case, cleanable with standard hospital cleaning materials.
Whole unit movable with wheels on at least two feet
All user-removable filters are cleanable. Cleaning instructions for filters are included in the instructions for use.
The unit includes internally and externally mounted filters for cleaning the air intake.
Unit weight <27 kg.
Intended use:
Used in wide range of laboratory services from hospital laboratory to reference centre. Self-adhesive stickers for labelling samples or reagents to be frozen.
For calibration of turbidity meters. Includes one each of 60-mL HPDE bottle of four NTU standards.
....
The densitometers are designed and factory calibrated to measure turbidity in the range of 0.5 to 4.0 units 0.0 to >7.5 units with a small standard deviation.
A compact benchtop densitometer (suspension turbidity meter) for measuring turbidity of cell suspensions in a variety of life science applications.
If required, it can deliver a wider measurement range (up to 15.00 units), but with a greater standard deviation.
Measurement time: 1 second. Precision: ±3%.
Measurement range: 0.5 to 4.0 units, 0.0 to >7.5 units.
To transfer liquids in clinical laboratory settings applicable for molecular/PCR & sterile microbiological works.
....
Reagent reservoir for short-time containment of reagent and chemicals during multichannel pipetting.
....
Cube Mould 100 MM Side two gangs with reinforced corners and band on the walls.
....
Made from steel sheet, zinc coated to prevent it from corrosion. The tank can accommodate up to 64 cubes 150mm side, or up to 48 cubes 200mm side. Complete with base rack and stopper for an easy water discharge. Supplied without thermostat heating system, to be ordered separately.
....
Various clinical laboratory uses including Centrifugation and short-term sample storage.
....
Non sterile gauze roll with selvedge
Material: Absorbent gauze, 100% cotton.
Type of gauze: 17 threads/cm2 (grammage 23g /m2).
Non-detectable by X-ray
Components: Bleached, purified textile, plain weave.
Size selected: Gauze roll (gauze folded in zigzag could be an alternative).
Length:100m.
Width: 65 to 90cm.
Non-sterile.
Single use
Thread count:
Weft: 66 to 74 threads/dm.
Warp: 95 to 105 threads/dm.
Weight: +/- 23g/m2.
Description: Turbidity Standard, 10 FNU/FNRU, 60 mL
Volume (English): 2 oz.
This Turbidity Standard is a calibration solution.
Type: Turbidity Standard
Packaging Type: Bottle
Non sterile gauze compress, folded edges, pack of 100 units.
Material: Absorbent gauze, 100 % cotton.
Non-detectable by X-ray.
Components: Bleached, purified textile, plain weave.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Number of folds (thickness): 12 ply
Non-sterile.
Single use
Size selected: Compress gauze folded.
Length: 10cm.
Width: 10cm.
Thread count:
Weft: 66 to 74 threads/dm.
Warp: 95 to 105 threads/dm.
Weight: +/- 23g/m2.
Description: Turbidity Standard, 10 NTU/NTRU, 60 mL
Volume (English): 2 oz.
This Turbidity Standard is a calibration solution.
Type: Turbidity Standard
Packaging Type: Bottle
Non-detectable by X-ray.
Material:
Netting material: absorbent gauze, 100% cotton.
Paraffin substance: mixture of balsam of Peru (approximately 1g) and soft paraffin Q. Suff. (approximately 100g).
Components:
Elastic-netting material with large mesh, impregnated with soft paraffin based material.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, paraffin.
Width: approximately 10cm.
Length: approximately 10cm.
Gauze compress, surgical folding, i.e. so that there are no free threads apparent after folding or when the first outside fold is opened. Non-detectable by X-ray.
Thread count warp 95 to 105 threads/dm;
Material: Absorbent gauze, 100% cotton.
Sterile.
Disposable.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Components: Bleached, purified textile, plain weave.
Number of folds (thickness): 12.
Initial sterilisation method: Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, folded.
Width: approximately 10cm.
Length: approximately 10cm
Weft 66 to 74 threads/dm
Weight: Approximately 23g/m2.
Turbidity standards are accepted for calibration purposes.
These standards are safe to handle in the lab. No special glassware or difficult lab techniques are required for the tests.
The pre mixed stabilized Formazin turbidity standards are true Formazin dilutions developed for use in any turbidimeter.
Its enhanced stability saves time and labor.; Platform: Solution; Parameter: ; Concentration: 1000 NTU; Precise, Pre-mixed Formazin Solutions; Enhanced Stability Saves Time and Labor; Confidence in results
standards have precise concentrations as low as 0.060 NTU for conventional turbidimeters.
Description: Turbidity Standard, 100 FNU/FBRU, 60 mL
For use with Turbidity Meter, Infrared Version
Volume (English): 2 oz.
Volume (Metric): 60 mL
Turbidity: 100 FNU/FNRU Standard
Stainless steel blade edge, cutting edge on one side, protected by detachable plastic cap.
Single use razor, plastic handle and head with single blade
Single use.
Non sterile.
Dimensions: head approximately 4cm, handle approximately 11cm.
Material: Needle: Stainless steel.
Measurements: External diameter expressed in Gauge and millimetres.
Base and protective cap: medical grade plastic.
Length expressed in inch and millimetres.
Size selected: 19Gx1 1/2” (1.1 x 40mm).
