Vaccine storage capacity: 36 L
Volume category: <60L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Refrigerant: R600a, 60 grams
PQS prequalified Solar direct drive refrigerator with no battery for storage of vaccines at +2?C to+8?C in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Fridge-tag Ultra Low has a USB interface and can be connected to a PC, Laptop or Mac without any installation software. When connected, the Fridge-tag Ultra Low will generate a PDF document with a 56-day report which includes all relevant information per day such as min/max and average temperatures, time out of range, alarm history etc.
Fridge-tag Ultra Low is an electronic, ultra-low temperature (ULT) freezer temperature logger with an external sensor, factory-programmed alarms and visual display for monitoring storage conditions in vaccine ULT freezers over a 30-day period. The device shows the actual temperature, all alarm violations over the previous 30 days (on a rolling basis), the daily minimum and maximum temperature of the last 30 days, and the time duration of any violation.
The Fridge-tag Ultra Low operates with a replaceable external sensor, which has a 12-month operating lifetime and needs to be replaced annually. Each Fridge-tag Ultra Low is therefore supplied with 3 external sensors (1 x main sensor and 2 x spare sensors) as standard.
Intended use:
To transfer liquids in general clinical laboratory applications.
Skipping rope for individual skipping, length 3 metres, diameter 1 centimeter.
Made of soft polyester threads, divided into eight strands, tightly woven, no handles (heat sealed at both ends).
Pack includes ropes of assorted colours.
Tray, instruments.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Reusable.
Seamless tray with cover.
Rectangular with rounded corners, smooth surface.
Length: approx. 300-320.mm.
Width: approx. 185-205.mm.
Height: approx. 55-65.mm.
Thickness: approx. 0.75-0.85.mm.
Set of 3 full colour posters, made of synthetic paper, printed in English and with Braille printing/embossing.
....
Standard specification for the Ambulance:
Attendant seat, for 5 persons
Heater, w/ defroster
Main stretcher
Medicine box
Power steering
Beacon lamp, blue or red, 1 pc.
Fire extinguisher
Floor, plywood covered with linoleum
Siren, motor driven
Room lamp, 10W
Sub fuel tank, 90 l
Standard equipment:
Air cleaner, cyclone, w/ pre-cleaner
Electrical system 12v
Engine under cover
Fire extinguisher, 1kg
Free wheel hub, manual
Front door fixed sash w/o vent window
Air conditioner non CFC
Assist grip, FR 2
Bumper rear, painted
Cigarette lighter
Door mirrors
Headlamp, 2 halogen
Heater, front
High altitude compensator
Lockable fuel tank lid/cap
Mud guards, front
Fuel filter for Diesel
Fuel tank 90L & extra fuel tank, 90L
Glove box w/o key
Head restraints, 2 front
Power steering
Radio, AM, w/ 1 sp.
Rear quarter glass slide
Rear seat belts NR 2x8
Rear seat parallel for 10 seats (seat belt is only for 8 seats)
Seat belts, front (ELR3-2-3)
Steering column, tilt + collapsible
Sun visor, 2pcs
Suspension, coil front, leaf rear
Seats, front, bench
Side and rear step, steel painted
Side impact beam
Spare wheel carrier back door w/lock
Spare wheel, full size
Tool kit with jack and jack handle
Tyres: 7.50R-16-8 (E) 5.50F (081D,004D)
Upholstery, vinyl
Touch-up paint
Towing eye, front & rear
Transfer 2-4 Selectors
Transfer protector (small type)
Warning triangle
Windscreen, green, laminated.
Tray, dressing.
Material: Austenitic stainless steel.
Seamless tray, rectangular with rounded corners, smooth surface.
Reusable.
Length: approx. 460-500 mm.
Width: approx. 315-345 mm.
Height: approx. 19-21 mm.
Thickness: approx. 0.75-0.85 mm.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Vaccine storage capacity: 132 L
Volume category: >120L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
PQS prequalified Solar direct drive refrigerator with no battery for storage of vaccines at +2?C to+8?C in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Refrigerant: R600a, 70 grams.
Remote Temperature Monitoring (RTM) system for remote monitoring of storage conditions at different levels of the vaccine cold chain: (a) with automatic transmission of data to a server (b) with integrated audio-visual alarm (c) capable of alarm notifications via SMS, email and/or iOS & Android mobile applications (d) with data access, setup of alarm thresholds and setup of alarm recipients through an internet accessible dashboard (e) configurable to suit specific applications and scalable to allow for the later installation of additional temperature monitoring products and/or storage facilities.
....
Tray, dressing, stainless steel.
Seamless tray, rectangular with rounded corners, smooth surface.
Material: Austenitic stainless steel.
Length: approx. 285-315 mm.
Width: approx. 190-220 mm.
Height: approx. 28-32 mm.
Thickness: approx. 0.75-0.85 mm.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Reusable.
In the field of industrial quality control, the impact test is a widely used test method with which to quickly and easily determine characteristics for a material or component analysis.
Features:
Charpy notched-bar impact test with increased work capacity up to 300Nm.
Safe experiments thanks to two-handed release of the hammer and optional protective cage.
Pendulum impact tester based on industrial standards.
Learning Objectives And Experiments:
Influence of notch shape, material and specimen temperature on the notched-bar impact work.
Determine the notched-bar impact work
Plot a notched-bar impact worktemperature diagram
Determine the notched-bar impact strength
Analyse the fracture surface characteristics.
The 30-Day Temperature Recorder (30DTR) can be connected to a PC via an USB interface cradle (LTI-HID) and generates a 32-day report via the free Analyzer 3 software, including all relevant information per day such as min/max and average temperatures, time out of range, alarm history etc. Data can be exported from the software in CSV file format.
The device shows the actual temperature, all alarm violations over the previous 30 days (on a rolling basis), the daily minimum and maximum temperature of the last 30 days, and the time duration of any violation. With internal sensor, is an electronic 30-Day Temperature Recorder (30DTR) with factory-programmed alarms and visual display for monitoring storage conditions in vaccine refrigerators (+2°C to +8°C) over a 30-day period.
Chest type
Capacity: 383L
Cabinet Type: Chest
Volume Category: ≥ 300 <600L
Power requirement: 220-240V/50Hz and upon request 110V/60Hz
For storage of COVID vaccine at -86°C
Storage temperature: up to-86°C
Operating ambient temperature: +10 °C - +27°C (Moderate zone)
Adjustable cabinet temperature set point -40C to -86C in 1°C increment., the temperature regulation accuracy is 1°C.
For dissecting, clamping, grasping tissues and for passing a thread around a vein or artery.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.20% carbon; 13% chromium.
Reusable.
Flexible ratchet, lockable.
Jaws which grip the thread well.
Pressure force instrument: threading forceps, springy.
Length: 23 cm.
Test Tube Rack 32 Hole
....-lab-1640152589.jpg "Torsion Testing Machine (30Nm)")
Torsion Testing Machine (30Nm) can cater for test specimens of up to 750mm. Standard hexagon drives are used for transmitting the torque into the specimens. An angular compensation system is integral to the torsion head with a dial gauge. The Torsion Testing Machine (30Nm) head measures the applied torque to the specimen using strain gauge technology. Data Acquisition Software is supplied to capture the test parameters and to display the graphs relevant to further work. The strain gauge signals are fed directly into the Data Acquisition Interface supplied.
Experimental Capabilities:
Torsional variation due to material, cross sectional area
Torsional loading to failure of varying material specimens
Determination of the Modulus of Rigidity and Yield shear stress
Working with the elastic torsion equation
Comparison between actual and theoretical results
The USB Interface Cradle is supplied with a 1-meter micro-USB to USB-A cable for connection to a PC and can be used to download data from multiple 30DTRs consecutively. The USB Interface Cradle serves as the physical data connection between a 30-Day Temperature Recorder (30DTR) and a PC for temperature data download.
....
Blackboard triangle/set square with detachable handle, 30-60-90º, longest side 60cm, 5mm thick plastic, graduated in cm on all sides.
....
SIZE(GMS) HANDLE LENGTH(INCHES) NET. WT. / CTN.(KGS) GR. WT. / CTN.(KGS)
1 10 18.2 19.7
1.5 10 20.475 21.975
2 12 18.2 19.7
3 12 20.475 21.975
4 12 18.2 19.7
6 16 21.84 23.34
8 16 21.84 23.34
10 16 18.2 19.7
12 16 21.84 23.34
14 16 19.11 20.61
16 16 21.84 23.34
18 16 16.38 17.88
20 16 18.2 19.7
