16F877 Target Board PIC Family
....
Volume category: <150L
Gross volume-Freezer: 147 L
Prequalified Mains Powered Vaccine/Water-Pack Freezer for storage of vaccines at -15?C to -25?C and freezing of water packs.
Energy consumption, stable running (kWh/24 hours): 2.81
Equipment operating voltage and frequency:
220-240 Volt 50Hz /60Hz, or 100-127 Volt 50Hz /60Hz, 1ph.
Refrigerant: R600a.
Operating temperature: Max rated ambient temperature: +43°C.
First aid bag rectangular, one zippered compartment, padded and lined on top and bottom panels of the compartment with one fixed handle and a detachable shoulder strap.
Shell fabrics: 100% Polyester, 600 x 300 denier, tightly woven and spun to resist puncturing, triple PVC/rubber blend coating. The material measures 340 GSM as a minimum when coated. The product does not permeate by water in the following situations: prolonged water exposure, heavy top-down watering, forceful water pressure applications and submersion.
Lateral fixations and length adjuster: Cyan blue PE plastic.
Cyan piping tape for seams: 100% polyester. Back and front seams of bag reinforced with piping.
Lining fabrics: Cyan taffeta, 100% polyester, 190denier.
Padding: Cyan blue 4mm molitan/sponge rubber, sponge thickness on the sides and top and bottom 10mm. The bag must be padded on all 4 sides and top and bottom.
Zips: Zinc alloy. Zip pull approximately 30mm. 2 Zip pulls Strong zipper with two fasteners sewn on top of the three side panels of the compartment.
Shoulder strap: Cyan blue: 100% polyester. 1200mm x 40mm shoulder strap with rubber pad reinforced with X stitching. Shoulder pad, Cyan blue 4mm rubber.
Carrying Handle: 100% polyester. 30mm wide at the top of the bag. Padded Handle reinforced with X stitching. The bag is reinforced along the side panels with a polyester band measuring 80mm.
Material: Polypropylene, autoclavable.
Capacity: approx. 475ml
Length: approx. 205mm
Width: approx. 95mm
Height: approx. 45mm.
Cabinet Type: Upright
Capacity: 707L
Storage temperature: up to-86°C
Volume Category: ≥ 600 <900L
Power requirement: 220-240V/50Hz and upon request 110V/60Hz
Operating ambient temperature: +10°C to +32°C (Temperate zone)
Adjustable cabinet temperature set point -40°C to -86°C in 1°C increment., the temperature regulation accuracy is 0.1°C.
Shell fabrics: 100% Polyester, 1200 x 600 denier, tightly woven and spun to resist puncturing, triple PVC/rubber blend coating material must measure 340 GSM when coated.
Lateral fixations and length adjuster: Cyan blue PE plastic.
Lining fabrics: Cyan taffeta: 100% polyester, 190denier.
Mesh lining: Black 100% polyester. 410x150mm
with elastic top and stitched to the base of the bag.
Cyan piping tape for seams: 100% polyester. Back and front seams of bag reinforced with piping.
Shoulder strap: Cyan blue: 100% polyester. 1200 mm x 40 mm shoulder strap with rubber pad reinforced with X stitching. Shoulder pad, Cyan blue 4mm rubber.
Zips: Zinc alloy. Zip pull 30mm.
Padding: 100% polyester, molitan/sponge rubber. The bag is padded on all 4 sides except the top.
Carrying Handle: 100% polyester. 30mm wide at the top of the bag. Handle reinforced with X stitching and padded Velcro closure.
Capacity of Bag: Suitable to carrying a weight of 10kg.
Vaccine storage capacity: 70 L
Volume category: >/=60, <120L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Refrigerant: R600a, 85 grams
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Compartment 1:
Inside Pockets:
Two inner pockets; mesh sides with elastic tops, located on the back side of the main compartment.
Large compartment YKK zip closure around three sides of the compartment with a 2 way YKK zip pull. Mesh lining stitched to the base of the bag and a 1mm PVC board reinforcement secured on the base.
Size: H400 x Depth100 x W270 mm.
Compartment 2:
Small pocket H230 x Depth 40 x W280 mm with side gussets, zip closure around top of pocket with one zip pull.
For removal of retained products of conception from inside the uterus.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15 - 0.40 % carbon; 13 - 14 % chromium.
Uterine curette.
Blade edge type: Sharp.
Shank type: Rigid.
Blade shape: Oval, fenestrated.
Length: shaft approx. 26 cm.
Width: spoon 7 mm.
Reusable.
Vaccine storage capacity: 57 L
Volume category: <60L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Refrigerant: R600a, 100 grams
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
The composition of the paper should be homogenous with no inclusions/alien particles and be suitable for a range of art activities(painting, colouring, sticking etc.)
Roll of white, plain (un-ruled) paper, 70 cm wide and 25 m long ,preferably with an internal cardboard tube strengthener. Paper to be 75% recovered paper fibres (post and pre-consumer waste) and of 80 gsm.
Compartment 1:
Inside Pockets:
Two inner pockets; mesh sides with elastic tops, located on the back side of the main compartment.
Large compartment zip closure around three sides of the compartment with a 2 way zip pull. Mesh lining stitched to the base of the bag and a 1mm PVC board reinforcement secured on the base.
Size: H400 x Depth100 x W270 mm.
Compartment 2:
Small pocket H230 x Depth 40 x W280 mm with side gussets, zip closure around top of pocket with one zip pull.
Set of winter clothing for child aged 7 years.
....
Volume category: <60L
Vaccine storage capacity: 37.5L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Refrigerant: R600a, 90 grams
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Cabinet Type: Upright
Capacity: 578L
Adjustable cabinet temperature set point -40°C to -86°C
Volume Category: ≥ 300 <600L
Storage temperature: up to-86°C
Operating ambient temperature: +10 °C - +32°C (Temperate zone)
Power requirement: 220-240V/50Hz.
To dilate the cervix of the uterus in order to make room for the insertion of instruments.
Static function instrument: uterine dilator.
Double ended with round, smooth, atraumatic ends.
Material: Austenitic steel (non quenched, non magnetic steel).
Austenitic steel composition: 16 - 18 % chromium; 10-14 % nickel; 2-3 % molybdenum.
See Martin Catalogue no. 24 Ref: 32 430 82.
Provided in sets of 8 (16 dilators).
Reusable.
Sizes: 3 - 4 mm to 17 - 18 mm diameter in canvas roll.
For clinical laboratory applications. Equipment, bench-top, filled with water, and used as a controlled temperature environment for incubating samples and/or tests.
....
Vaccine storage capacity: 7 litres
Cold box, Small, Long range
Cold life at 43°C without openings: 114.9 hours
With hinged lid and carrying handles.
Supplied with 14 x 0.6L icepacks as a standard.
Weight fully loaded: 23.3 Kg.
Flumes have various models available, giving students a widechoice of experimentation in open channel flow. The flumes have a built-inre-circulating water supply connected to a digital flow metre for accuratemeasurements during experimentation. The 32-waypressure display connects for real-time data acquisition. Each is supplied withtwo level gauges and a Pitot tube, all of which mount onto and run along theinstrument rails at the top of the flume. Measurements from these instrumentscombined with the digital flow meter provide the potential for extensive analysisof open channel flow for research or advanced study. The Series channels are 300 mm in width, 450 mm in height,and are available in 2.5 metre, 5 metre, 7.5 metre, 10 metre, 12.5 metre and 15metre lengths. The flumes have pressure measurement tappingsat 0.25 metre intervals along the working section. These tappings can connecteither to a multi-tube manometer or to a 32-way pressure display. Bed-load transport can beinvestigated using the optional Sediment Loop. This ancillary provides a closedsediment circuit consisting of a sediment trap and feed mechanism which allowssand to be pumped from the trap to a feeder located above the working sectionbetween experiments. Screw jacks raise and lower thesupports inclining the channel as required. Thisgives smooth, uniform flow, free from entry effects. The digital inclinometer gives anaccurate display of the channel angle. A pump with a speed controller, forceswater up to the flow settling chamber at the upstream end of the channel.
....
Cabinet Type: Upright
Capacity: 729L
Storage temperature: up to-86°C
Volume Category: ≥ 600 <900L
Operating ambient temperature: +5 °C - +40°C (Hot zone)
Adjustable cabinet temperature set point -86 ? to -50 ?
Power requirement: 220-240V/50Hz.
