PCR reaction well to be used on most standard 48 well block thermocyclers, RT PCR platforms, DNA Sequencers.
....
Material: Absorbent gauze, 100% cotton
Gauze bandage with selvedge.
Components: Bleached, purified textile, plain weave
Non elastic, non adhesive, non detectable X-ray.
Single use.
Non-sterile.
Size selected: Bandage, gauze roll.
Length: 4 - 5m.
Width: 7.5 - 8cm.
Thread count:
Weft: 8 threads/cm
Warp: 12 threads/cm
Weight: +/- 27.5g/m2.
Type of thread: Absorbable, synthetic braided thread (PGA, polyglycolic acid).
Gauge of thread: Expressed in Decimal gauge DEC number and in the old system of thread numbering: DEC 2 (3/0).
Length: 75cm.
Sterile.
Disposable.
Type of needle:
Length: 26mm.
Point: triangular.
Shape: curved needle, 3/8 circle.
Initial sterilisation method:
Ethylene oxide gas.
Gauge of thread: Expressed in Decimal gauge DEC number and in the old system of thread numbering: DEC 2 (3/0).
Type of thread: Absorbable, synthetic braided thread (PGA, polyglycolic acid).
Length: 75cm.
Type of needle:
Sterile.
Disposable.
Shape: curved needle, 3/8 circle.
Length: approximately 18mm.
Point: round.
Initial sterilisation method:
Ethylene oxide gas.
Gauge of thread: Expressed in Decimal gauge DEC number and in the old system of thread numbering: DEC4 (1).
Type of thread: Absorbable, synthetic braided thread (PGA, polyglycolic acid).
Length: 75cm.
Type of needle:
Length: Approximately 50mm.
Shape: curved needle, 3/8 circle.
Point: round.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas.
Gauge of thread: Expressed in Decimal gauge DEC number and in the old system of thread numbering: DEC3 (2/0).
Type of thread: Non absorbable, synthetic monofilament (Nylon).
Length: 75cm.
Type of needle:
Point: triangular, conventional cutting
Shape: curved needle, 3/8 circle.
Length: approximately 30mm.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas.
Gauge of thread: Expressed in Decimal gauge DEC number and in the old system of thread numbering: DEC 2 (3/0).
Type of thread: Non absorbable, synthetic monofilament (Nylon).
Length: Approximately 75cm.
Type of needle:
Point: triangular, conventional cutting
Shape: curved needle, 3/8 circle.
Length: approximately 18mm.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas.
Simulation of the inputs through switches and externally through terminals. The programming software is also supplied to allow programming the PLC from the computer, if so preferred. Easy to be programmed from its own panel, without computer. It is composed (including the extension module) of 12 digital inputs and 8 relay outputs.
....
This product is intended for use exclusively by trained medical professionals. The ShangRing comes in a range of 24 sizes (from A4 to Z), each with a unique inside diameter that ranges from 11mm to 40mm. To provide a safe method of performing male circumcision in adolescent and adult populations with the primary goal of reducing the transmission of Human Immunodeficiency Virus (HIV), while also targeting the prevention of Human Papillomavirus (HPV), which is associated with cervical cancer and anal cancer, and Human Herpes Simplex Virus type 2 (HSV-2), which causes genital ulcers and increases the risk of acquiring HIV.
....
This product is intended for use exclusively by trained medical professionals. The ShangRing comes in a range of 24 sizes (from A4 to Z), each with a unique inside diameter that ranges from 11mm to 40mm. To provide a safe method of performing male circumcision in adolescent and adult populations with the primary goal of reducing the transmission of Human Immunodeficiency Virus (HIV), while also targeting the prevention of Human Papillomavirus (HPV), which is associated with cervical cancer and anal cancer, and Human Herpes Simplex Virus type 2 (HSV-2), which causes genital ulcers and increases the risk of acquiring HIV.
....
This product is intended for use exclusively by trained medical professionals. The ShangRing comes in a range of 24 sizes (from A4 to Z), each with a unique inside diameter that ranges from 11mm to 40mm. To provide a safe method of performing male circumcision in adolescent and adult populations with the primary goal of reducing the transmission of Human Immunodeficiency Virus (HIV), while also targeting the prevention of Human Papillomavirus (HPV), which is associated with cervical cancer and anal cancer, and Human Herpes Simplex Virus type 2 (HSV-2), which causes genital ulcers and increases the risk of acquiring HIV.
....
Basic principles of open-channel flow
Experimental section with 10 evenly spaced threaded holes on the bottom for installing models or for Water level measurement using pressure
Side walls of the experimental section are made of tempered glass for excellent observation of the experiments
Experimental flume with experimental section, inlet and outlet element and closed water circuit
All surfaces in contact with water are made of corrosion-resistant materials
Flow-optimised inlet element for low-turbulence entry into the experimental section
Length of the experimental section 2,5m or 5m
Smoothly adjustable inclination of the experimental section
Models from all fields of hydraulic engineering available as accessories
Closed water circuit with water tank, pump, flow rate sensor and manual flow adjustment.
The trainer has also been strategically sectioned and cutaway to allow students to visualize the internal engine and transmission components, and the variable timing and valve lift electronic control system. The Cutaway Engine And Transmission 1.8l Trainer has been specifically designed for demonstrating the operation of a 1.8L engine with transmission, shift lever and the iVTEC (Variable Valve Timing And Lift Electronic Control) system which is operated by regulated air pressure.
Advantages:
All OEM components
Functional iVTEC system operated by regulated air pressure
Driven by electric motor
Functional hydraulic clutch and shifter
Completely enclosed for safe observation.
These coveralls features strong, durable material and several measures to seal out chemicals.
Offers protection from a vast array of chemicals including toxic and corrosive agents
Strong zipper, flexible closure, storm flaps with adhesive seal
Attached socks
Attached boot covers
Elastic wrists
Protection against corrosive, toxic gases, liquid and solid chemicals
Industrial, HazMat, and domestic preparedness.
TK fabric
Extremely durable, puncture- and tear-resistant
Respirator fit hood.
Provides 30 minutes of protection against over 320 chemical challenges
Chosen by HAZMAT responders worldwide
10000 offers a high level of protection against toxic, corrosive gases and liquid chemicals
Garments include fully encapsulated, vapor protective Level A suit and liquid-splash protective Level B suits as well as coveralls.
10000 has excellent chemical barrier properties and high strength for enhanced durability. Developed for protection against toxic, corrosive gases and liquid chemicals, this high-performance chemical barrier fabric is suited for industrial, HAZMAT, and domestic preparedness applications.
10000 garments are available to meet NFPA 1991 and NFPA 1994 standards.
Available in high-visibility lime yellow.
Zipper front with taped storm flap
Interior has comfortable, cloth-like feel against the skin
Reflex Design provides 12% more chest room and 6% longer body length.
For chemical permeation and jet liquid protection
Level B/C suit made from durable fabric with exterior laminated with 23-P film. Suitable for numerous applications including chemical handling/mixing/clean-up, hazardous material handling, hazardous waste cleanup, industrial Hazmat teams, petrochemical, and utilities.
Soft knit cuffs
High mandarin collar
Double bagged.
A8 Zippered Lab Coats are made with a protective 3-layer SMS fabric and are recommended where there is the potential for light fluid contact.
Zippered front closure and no pockets to reduce risk of contamination.
Made using a patented flash spinning process
Provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
Clean delivers an ideal balance of protection, durability, and comfort. Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio.
Elastic openings for tighter fit at wrist and ankle
Raglan sleeve design for greater range of motion and comfort.
Protection: Flame retardant treated fabric with PVC barrier film offering wearers protection from liquid chemicals
Versatile: Good for most applications where there is the need for protection from chemical spray without compromising wearer protection in the event of a flash fire
Optimized body fit: Improves wearer comfort and safety
Highly visible: Bright red color to improve worker safety
Design: Elastic waist, wrists and ankles, double zip closure, double cuffs with knitted inner cuff, serged and taped seams, 2-piece hood
Offer protection from particulates and chemical sprays or splashes without compromising worker protection in the event of a flashfire. 68-CFR Flame Retardant Coveralls are manufactured from flame retardant and antistatic fabric. They are ideal for use in industries like oil and petrochemicals, petrolium distribution and processing, and utilities.
Applications: Oil and petrochemicals, petroleum distribution and processing, utilities.
Comfort: Moisture vapor permeable ("breathable") to help reduce the risk of heat stress
Low Linting: Reduces the risk of fiber contamination in some critical areas
Design: Elastic waist, wrists and ankles, 2-way front zipper with storm flap, bound seams, 3 piece respirator fit hood, attached anti-skid boots with Sure Step soles
Provide the wearer with entry level, low hazard liquid and particulate protection. 68-1800 White Coveralls with Hood and Boots are ideal for a wide range of general industrial applications including general maintenance, paint spraying, powder handling, and food work.
Protection: Low hazard liquid spray, splash and particle protection
Applications: General maintenance, paint spraying, powder handling, food.
