Passive Safety Devices For Motorcars simulator allows the study, the testing and the troubleshooting on the devices which have been developed for the purpose of increasing the safety of driver and passengers inside motorcars. The simulator considers all those systems that allow to reduce the consequences of accidents; in particular, the following devices are analyzed:
Air bag (driver bag, passenger bag, side bag, window bag)
Passive Safety Devices For Motorcars simulator allows the Multi-function valve in the fuel tank
It is possible to simulate the behaviour of components and circuits, on the basis of operating conditions that students and teachers can control directly on the panel or through the personal computer. The different not acting safety devices are reproduced on the panel through a synoptic diagram that allows a complete analysis of the components and, in case, of the relevant electrical/electronic control circuit. The latter keeps constantly under control the simulation, by visualizing its behaviour by means of signals and analog and digital meters; in this way the student, through suitable measurements and tests, can proceed to the fault finding activity.
Hydrogen Concept Car And Gas Station then feeds the air-breathing double fuel cell on board the car, producing electricity and driving the car forward. The gas station uses solar power to run an electrolyser and produce hydrogen gas. One tank of hydrogen produces enough power for a 7-minute run time. Power supply and experiment / textbook included. Our most realistic model car set gives observers a glimpse of the transportation technology of the future.
....
Vaccine storage capacity: 2.5 liters
Vaccine carrier, Extra Large, Long range
With lid and shoulder strap.
Cold life at 43°C without openings: 50 hours and 12 minutes
Supplied with 4 x 0.6L icepacks as a standard.
Weight fully loaded 6.36 kg.
It adopts low-power LED display with visual, clear and accurate reading. It can determine CO2 percentage content in the mixed gases rapidly and the smallest quantity of gas-sample is 2.0ml.
....
Identity card holder (lanyard), polyester, 20mm wide, in 100% Cyan blue with 1 colour imprint (white) with safety clasp and suspension
clip with PVC strap, packed in a bag of 50.
Magnetic Damping Accessory To Add Friction On Cart
....
Material of the simulator: Thermoplastic polyurethane - TPU (primary material for body skin), Poly vinyl chloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, polypropylene - PP, and iron/steel.
Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation. Full term anatomically accurate newborn with umbilical cord
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures.
Vaccine storage capacity: 0.8 litres
Vaccine carrier, Small, Short range
With lid and shoulder strap.
Cold life at 43°C without openings: 20 hours 16 minutes
Supplied with 2 x 0.4L icepacks as a standard.
Weight fully loaded: 2.18 Kg
Material of the simulator: Thermoplastic polyurethane - TPU (primary material for body skin), Polyvinylchloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, polypropylene - PP, and iron/steel.
Full term anatomically accurate newborn with umbilical cord.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
The Car Climatization Study Unit allows to study a climatization plant for motor vehicles by simulating both the cooling and the heating of thepassenger compartment.It includes the basic components present in this type of plants and allows to simulate the real working conditions. The fluidutilized is Freon R134a (HFC), which is CFC free.The unit is mounted on a wheeled frame and is fitted with the instruments necessary to measure the working parameters.Besides, it is possible to simulate same single faults.The study unit is supplied with manuals which describe the components, the installation and utilization procedures as well asmany exercises with experimental results.
Experiments:
Heating of the passenger compartment.
Effect of the engine speed on the frigorific cycle.
Effect of the air temperature at the condenser.
Cooling of the passenger compartment for a given thermal load.
Fault simulation.
Calculation of the frigorific efficiency under different load conditions.
Vaccine storage capacity: 2.9 litres
Vaccine carrier, Extra-large, Long range
With lid and shoulder strap.
Cold life at 43°C without openings: 51 hours 8 minutes
Supplied with 4 x 0.6L icepacks as a standard.
Weight fully loaded: 5.36 Kg.
Newborn simulator to facilitate learning complete newborn care,including cord cutting and ligation, as well as newborn resuscitation, dark complexion
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
Simulator consists of a dark skin manikin, that has an appearance andsize of full term infant with umbilical cord.
Material of the simulator: TPU (primary Thermoplastic polyurethane - TPU (primary material for body skin), Poly vinyl chloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, Polypropylene - PP, and iron/steel.
The Car Lighting System Trainer allows learning the marks and graphic symbols of the electrical installation elements according and testing the resistance, the voltage and the power in the vehicle installation system. Complete with user manual that will allow teachers to develop their own experiments.
The Car Lighting System Trainer includes the following systems:
Direction indicators, hazard lights
Headlight lift regulator
Vehicle interior lighting
Wiper equipment
Window wash system
Passing lights, driving lights and parking lights
Fog lights
Brake and reversing lights
Vehicle horn sound.
Vaccine storage capacity: 3 litres
Vaccine carrier, Extra-large, Long range
With lid and shoulder strap.
Cold life at 43°C without openings: 30.3 hours
Supplied with 6 x 0.3L & 1 x 0.6L icepacks as a standard.
Weight fully loaded: 7.3 Kg
Newborn simulator to facilitate learning complete newborn care,including cord cutting and ligation, as well as newborn resuscitation, light complexion
Simulator consists of a light skin manikin, that has an appearance and size of full term infant with umbilical cord.
Material of the simulator: Thermoplastic polyurethane - TPU (primary material for body skin), Polyvinylchloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, Polypropylene - PP, and iron/steel.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony asrelevant and suitable for simulation.
Simulator is used to facilitate learning preterm infant care, including thermal care andfeeding support such as exclusive breastfeeding, alternative oral feeding and enteral feeding with nasogastric tube. Simulator, premature infant care, dark complexion.
Simulator consists of a dark skin manikin, that has an appearance and size of approximately 32 weeks old premature infant, together with Breastfeeding Simulator and Preterm Wrap.
Can be used to practice:
Breastfeeding - proper positioning and attachment.
Intragastric tube placement
Skin-to-skin care
Cup feeding
Material of the simulator: Vinyl, Silicone, Polyoxymethylene - POM, Poly vinyl chloride - PVC, Polypropylene - PP, Thermoplastic polyurethane - TPU
Texture of the simulator: Soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea premature infant, feeling smooth / resilient / bony as relevant and suitable for simulation.
Simulator consists of a light skin manikin, that has an appearance andsize of approximately 32 weeks old premature infant, together with Breastfeeding Simulator and Preterm Wrap.
Material of the simulator: Vinyl, Silicone, Polyoxymethylene - POM, Poly vinyl chloride - PVC, Polypropylene - PP, Thermoplastic polyurethane – TPU.
Texture of the simulator: Soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea premature infant, feeling smooth / resilient / bony as relevant andsuitable for simulation.
Simulator is used tofacilitate learning preterm infant care, including thermal care and feeding support such as exclusive breastfeeding, alternative oral feeding and enteral feeding with nasogastric tube. Simulator, premature infant care, light complexion.
Can be used to practice:
Breastfeeding - proper positioning and attachment.
Skin-to-skin care
Cup feeding
Intragastric tube placement.
Vaccine carrier, Extra-large, Long range
Vaccine storage capacity: 3.4 litres
With lid and shoulder strap.
Cold life at 43°C without openings: 43.43 hours
Supplied with 4 x of 0.6L icepacks as a standard.
Weight fully loaded: 4.9 Kg.
Material: Cardboard.
Sturdy base provides optimal stability.
Self-supporting vertical rack for drying DBS cards.
Provides horizontal position for 10 cards.
Used to air dry the blood spot samples collected for early infant diagnosis of HIV.
Single use.
