Non sterile gauze compress, folded edges, pack of 100 units.
Material: Absorbent gauze, 100 % cotton.
Non-detectable by X-ray.
Components: Bleached, purified textile, plain weave.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Number of folds (thickness): 12 ply
Non-sterile.
Single use
Size selected: Compress gauze folded.
Length: 10cm.
Width: 10cm.
Thread count:
Weft: 66 to 74 threads/dm.
Warp: 95 to 105 threads/dm.
Weight: +/- 23g/m2.
MG Screw compressor with charge-air cooling
Easily visible:
Two screw spindles, driven via a magnetic clutch and gear wheels.
At the bottom of the charger, is the cutaway charge-aircooler with water channels.
The charger runs at 12,000 RPM.
Pressure vessel after the second stage with safety valve, blow-off valve and silencer as well as an Additional manometer and a pressure switch
Intake vessel with nozzle to measure the intake volumetric flow rate, pressure sensor and additional manometer
Recording the characteristic of a two-stage compressor
Digital displays for temperatures, pressures, differential pressures and electric power output
Piston compressor with 2 cylinders in V-arrangement
Pressure vessel after the first stage as intercooler
Sensors for pressures, temperatures and electric power output.
Non-detectable by X-ray.
Material:
Netting material: absorbent gauze, 100% cotton.
Paraffin substance: mixture of balsam of Peru (approximately 1g) and soft paraffin Q. Suff. (approximately 100g).
Components:
Elastic-netting material with large mesh, impregnated with soft paraffin based material.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, paraffin.
Width: approximately 10cm.
Length: approximately 10cm.
Gauze compress, surgical folding, i.e. so that there are no free threads apparent after folding or when the first outside fold is opened. Non-detectable by X-ray.
Thread count warp 95 to 105 threads/dm;
Material: Absorbent gauze, 100% cotton.
Sterile.
Disposable.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Components: Bleached, purified textile, plain weave.
Number of folds (thickness): 12.
Initial sterilisation method: Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, folded.
Width: approximately 10cm.
Length: approximately 10cm
Weft 66 to 74 threads/dm
Weight: Approximately 23g/m2.
Compression testing machine 5000 KN motorized with control unit (semi-automatic model), to test cubes up to 300 mm side and cylinders up to dia. 250x500 mm.
....
Compression testing machine 5000 KN motorized with control unit (fully automatic model), to test cubes up to 300 mm side and cylinders up to dia. 250x500 mm.
....
The unit itself includes the electric drive motor with speed control, 2 pressure vessels for the compressor experiments, a measuring tank and a supply tank for the pump experiments and a protection cover. The intake and delivery pressure, temperature, motor speed and power are measured and displayed digitally. The modular system allows the investigation of different machines (reciprocating machines and turbo machines). The corresponding flow is measured indirectly and transferred to the PC data acquisition software. Each machine is mounted on a base plate, which can easily be fitted into the unit. It is powered by a belt drive. Hoses with quick-action couplings provide the supply lines.
....
Compression Flexural frame on mortar specimens, dual range:
0-15 kN for flexure tests complete with two pressure transducers used along with a digital concrete compression machine
0-250 kN for compression tests.
Radial compressors are used to compress gases. The experimental unit provides the basic experiments to get to know the operating behaviour and the important characteristic variables of radial compressors. A protective plate placed in front of the inlet of the intake pipe prevents larger objects from being sucked in or the clogging of the intake opening. The medium is sucked in axially to the drive shaft by the rotation of the impeller and flows through the impeller rotating at high speed. By means of centrifugal force, the medium is accelerated towards the outer edge and is compressed in this manner. The air flow is adjusted by a throttle valve at the end of the delivery pipe. The microprocessor-based measuring technique is well protected in the housing. The experimental unit is fitted with sensors for pressure, temperature and speed. The flow rate is determinated via differential pressure measurement on the intake nozzle.
....
Concrete compression machine 5000 KN high stability with control unit the ideal solution for central and research laboratories to test high strength specimens explosive samples rock and ceramic samples.
....
Electrical components for the start and operation of the compressor mounted clearly visible
Lab jacks and cables to connect the electrical components
Experimental unit from the practical series for the training of mechatronics engineers for refrigeration
Circuit diagram on the front panel for easy identification of the components
Refrigerant circuit with compressor, receiver, 2 valves and 2 manometers to investigate pressure switches on the delivery and intake sides
Operation of a thermostat
Correct electrical connection of a refrigerant compressor.
Compression testing machines 3000 KN motorized with control unit fully automatic model high stability, to test blocks max. 500x300 mm, cubes up to 200 mm side and cylinders up to dia. 160x320 mm.
....
Compression testing machine 3000 KN motorized 2 gauges to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm
....
Compression testing machine 2000 KN motorized with control unit high stability to test blocks max. 500x300 mm, cubes up to 200 mm side and cylinders up to dia. 160x320 mm.
....
Compression testing machine 2000 KN capacity motorized with Servo-Plus evolution control unit to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm.
....
Compression testing machines motorized with control unit (semi-automatic model) to test cubes up to 200 mm side and cylinders up to dia. 250x500 mm.
....
Compression machine 3000 KN motorized with control unit, to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm
....
Compression machine 3000 KN motorized 1 gauge to test cubes up to 200 mm side and cylinders up to dia. 160x320 mm.
....
Compression machine 2000 KN motorized 1 gauge to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm.
....
