Drop-down cleanroom coveralls include internal colored tabs to indicate safe touch points, strategically placed removable tabs, and a removable zip tab.
Quick release press stud tabs for touch-free donning
Elasticated back, hood, cuffs and ankles
Antistatic, low linting durable Clean Tough fabric
Low-Particulate
Zip front
Sterility Assurance Level 10−6.
Flexible and durable light liquid splash protection
Elastic opening for tighter fit at ankle
Elastic opening for tighter fit at wrist
Attached hood with elastic around face opening
Yellow for high visibility
Polyethylene-coated fabric provides at least 30 minutes of protection against 42 chemical challenges
10 mil thickness.
Use when potential exposure to chemical warfare agents exists; widely used by military first responders for WMD situations.
Strong and lightweight, with broad chemical barrier
Front-zipper closure
Storm flap with double-sided tape over zipper
Taped seams
Elastic back
Elastic wrists
Attached respirator-fit hood with elastic around face
Gray.
Elastic openings for tighter fit at wrist and ankle
Bound neck for lower particle shedding
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Front zipper closure for easy donning and doffing
Sleeve design for greater range of motion and comfort
Clean-processed garments offer lowest level of particle shedding within product portfolio
Bound seams are covered with garment fabric to reinforce the seam
Greener Choice Claims
Environmental benefits include:
Recyclable.
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Elastic openings for tighter fit at wrist and ankle
Clean-processed garments offer lowest level of particle shedding.
Bound seams are covered with garment fabric to reinforce the seam
Sleeve design for greater range of motion and comfort
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing.
Disposable sterile coverall with hood features a thumb loop for secure hold.
Sterilized by Gamma irradiation
Anti-Static properties
Low linting, anti-static Fabric made
Low-particulate
Sterility Assurance Level 10-6
Zip front with flap cover
Thumb loops on wrist
Elasticated back, cuffs and ankles
Drum Tested
Available in sizes ranging from S through 4XL.
Air and moisture vapor can pass through to aid wearer comfort
Triple-stitched serged seams
Patented Reflex design is 7.5 times less likely to rip out than minimums — provides 12% more chest room and 6% longer body length
Provide general protection against many particles
Breathable patented barrier SMS fabric passes NFPA 99 for antistatic materials
For use in laboratories, remediation, decontamination modesty garment, pesticides, and heavy dust environments. Elastic Back, Wrist and Ankles with Attached Hood and Boots.
Offers high abrasion resistance and is low linting
Withstand multiple wearings
White.
For use in controlled environments with high standards for particle and microbiological contamination control:
Medical Device
Electronics
Pharmaceutical
Biotech
Light and durable
Coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Spun polyethylene creates barrier to particles, micro-organisms, and non-hazardous liquids
Covered elastic wrists and ankles with dolman sleeves
Zipper closure
Lowest level particle shedding
Bound seams and neck
Should not be worn around open flame, heat source, sparks or ignition sources.
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in isolation units for infection prevention and control against viral penetration.
....
Excellent protection from nonhazardous particles and liquids
Strong and abrasion resistant; suitable for multiple wearings
Seamless front to provide more protection in the primary exposure areas
Combine durability and breathability to provide comfortable splash and particle protection
Zipper front with 1 in. (2.5cm) flap and elastic back
Color: White
Barrier SMS Fabric incorporates a web of microfibers that filter particulates and water-based liquids. Suitable for many applications including pharmaceutical research, food processing and more.
With elastic back, wrists and ankles.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Standard hood with elastic around the face
Made from microporous film, 50 garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Elastic wrist
Serged seams
Attached skid-resistant boots
Front zipper closure
White.
Comfort fit design based on extensive wearer input provides a comfortable garment design that enables a greater range of movement while stretching and bending, a more tailored fit, reinforcement in high stress areas for fewer blowouts, a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Optimized for comfort, softness and breathability while enabling cost savings for disposable garments
Elastic opening for tighter fit at wrist
Attached hood with elastic around face opening
Attached skid-resistant boots
White.
Coverall has elastic openings for tighter fit at wrist and ankle
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
Seeve design for greater range of motion and comfort
Clean-proceesed and sterile coveralls worn in controlled environments protect against particulates and other contaminants.
Clean-processed garments offer lowest level of particle shedding.
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Garments are gamma sterilized to SAL of 10-6
Full traceability on all sterilized apparel with sterility available.
Provides light-weight inherent barrier protection against hazardous dry particles and aerosols, and nonhazardous light liquid splash.
Excellent abrasion resistance due its unique, nonwoven material
Coveralls with respirator fit hood provide the protection and durability you need so you can focus on the task at hand.
Can be used in a variety of applications including general maintenance/operations, asbestos and lead abatement, mold remediation, and environmental cleanups.
Made from flash spun polyolefin protective material to create a barrier to particulates, nonhazardous liquids and micro-organisms
Ideal protection against micro-organisms and particulates in controlled environments.
Coveralls feature Micro-Clean with 2-1-2 polymeric resin coating that allows for thorough protection and reduction in static.
Antistatic
Bound neck and seams with zipper closure
Dolman sleeves
Elastic wrists and ankles.
Available clean processed (individually packaged) or sterilized via gamma irradiation
Coated in 2-1-2 polymeric resin.
Disposable coveralls can be easily discarded via landfill burial or proper incineration3
Long torso with polyester front zipper measures 26 in. long (66cm)
White.
Lightweight coveralls (1.8 oz. per sq. yd.) provide excellent barrier protection against nontoxic particle, liquid and spray hazards. True aerosol- and liquid-proof microporous barrier demonstrates >99% holdout of particles down to 0.35μm.
Affordable high-barrier protection
Proprietary bilaminate composite fabric provides superior liquid penetration1
Compared favorably to leading fabric in physical property tests covering resistance to ripping and tearing2
Breathable, cloth-like material treated to provide antistatic properties for use in controlled environments
Low linting for use in critical applications.
Optimized for comfort, softness and breathability while enabling cost savings for disposable garments
Elastic opening for tighter fit at wrist
Comfort fit design based on extensive wearer input provides a comfortable garment design that enables a greater range of movement while stretching and bending, a more tailored fit, reinforcement in high stress areas for fewer blowouts, a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Attached hood with elastic around face opening
Attached skid-resistant boots
White.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Made from microporous film, garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Front zipper closure
Elastic wrist
Standard hood with elastic around the face
Attached skid-resistant boots
White
Serged seams
Thickness: 10 mils.
Material rapidly dissipates vapor and heat on a microscopic level which helps to keep wearer cool and comfortable throughout the workday.
Material has static dissipative properties
Lightweight, durable microporous material delivers protection against particles, biologicals, and fluids in controlled environments. Available in 3 different styles.
Fluid and particulate barrier
Exhibits an ultra-low particle count and 99.9% filtration efficiency
Latex-free
Serged seams
White.
Available in two styles and two colors, offers a unique blend of strength, comfort, and protection in controlled environments.
Elastic back
Serged seams.
Low particle count.
