6000 FR also exceeds the Hazard Risk Category 2 requirement of 8 cal/cm2 outlined in NFPA 70E, Standard for Electrical Safety in the Workplace. 6000 FR fabrics are tested by a third party laboratory to assess its chemical permeation resistance.
Provides at least 30 minutes of protection against over 180 chemical challenges plus the added benefit of electric arc, and flash fire burn injury protection
6000 FR garments meet the requirements of Standard on Liquid-Splash Protective Ensembles and Clothing for Hazardous Materials Emergencies and NFPA 2112, Standard on Flame-Resistant Garments for Protection of Industrial Personnel against Flash Fire.
Utilized and relied on by industrial workers and responders Available in orange for high visibility and gray for low visibility.
6000 FR offers triple-hazard protection from liquid-chemical splash, flash fire, and electric arc.
6000 FR coveralls combine the trusted chemical protection of fabric and flame protection of Nomex fiber in a single-layer garment.
6000 F Face Seal, provides tighter chemical protection, enables longer wear time, and better comfort. This unique fabric offers protection against both organic and highly concentrated inorganic chemicals.
Lightweight, <500g per coverall
6000 F Hooded Coverall features several innovative features including a rubber tight seal around the mask and attached gloves for continued chemical protection from sleeve to glove.
Rear entry with double flaps, press stud buttons and zipper for enhanced user protection
Attached dissipative socks with boot flap
Rubber face seal for compatibility with full face masks, no taping needed
High level chemical protection inner glove attached.
RESPONDER CSM Coverall is a chemical-resistant garment with attached gloves and socks.
....
6000 fabrics are tested by a third party laboratory to assess its chemical permeation resistance.
Provides protection against over 180 chemical challenges for at least 30 minutes
Used by military personnel and first responders for chemical warfare situations
6000 Coveralls provide protection from chemical warfare agents and toxic industrial chemicals.
6000 coveralls are made of a proprietary barrier film laminated to a substrate.
Available in low-visibility gray fabric for discretionary purpose.
Strong, lightweight innovative microporous composite material protects the wearer from grime, dirt, and particulates.
Front zipper for easy donning and doffing
Elastic hood, wrists and ankles
Attached Sure Grip boots
Serged seams
Pocketless to help control items entering and leaving the work area
Attached hood
White.
3M Disposable Protective Coverall 4540+CS helps protect against certain light liquid splashes and hazardous dusts, including nuclear particles. This coverall offers a collared option for situations where a hood is not required or may interfere with alter
Lightweight, breathable material helps keep workers cool and comfortable
Extra room in arms and legs allow for free movement on the job
Seamless shoulders and sleeve tops help provide increased comfort and fewer potential entry points for contaminants
Protective coverall helps protect against certain light liquid splashes and hazardous dusts
3M Protective Coveralls are designed for use in industrial workplaces as a physical barrier to help prevent skin contact from liquid splashes and dust in certain work environments. Seamless shoulder and sleeve tops help provide increased comfort and fewer potential entry points for contaminants. In addition.
Meets government standards for Type 6 Splashes, Type 5 Dust, Anti-Static and Nuclear protection
Does not contain components made from natural rubber latex to help prevent reactions from users with latex sensitivities or restrictions.
Three panel hood design helps provide a more comfortable fit and a sleek, low-profile style.
Excellent barrier against dry particles and certain liquid chemical splash.
Soft and light, ultra-low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement
3M Protective Cover all 4540+ is made from a laminated premium bicomponent non-woven and features a breathable SMMMS triangular back panel for improved comfort. This soft and lightweight coverall provides an excellent barrier to hazardous particles and limited liquid splashes.
Anti-static coatingreduces static discharge and the risk of sparks
Nuclear particulate hold out.
3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure
Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement
High level of comfort and breathability
Offer lightweight protection against dry particulates, keeping dirt and debris off the body or in the suit
Full length zipper front for easy donning
White.
Available in two styles: open wrists and ankles or elastic wrists and ankles to keep dirt and debris out.
Cost-effective standard-weight spun bond polypropylene coverall.
Reusable Cleanroom Coverall features raglan sleeves, military collar, color coded hang loop, coil zipper, snaps at top of zipper, ESD knit cuffs at sleeve opening, and snaps at leg hems and backs of legs.
Features raglan sleeves, military collar, color coded hang loop, coil zipper, snaps at top of zipper, ESD knit cuffs at sleeve opening, snaps at leg hems and backs of legs.
Fabric 99% Polyester 1% Carbon.
Navy.
Disposable Protective Coverall protect workers from certain light liquid splashes and hazardous dust while enhancing movement and comfort. Built for protection and designed for comfort, this protective gear features breathable back panels and an anatomical fit for enhanced wear, coverage, and comfort while working.
Anti-static coating on both sides helps reduce static build-up and prevent the risk of static discharge during use.
Elastic waist, ankles, and wrists for convenience and freedom of movement.
Does not contain components made from silicone to help prevent reactions from users with silicone sensitivities or restrictions.
Two-way zipper with storm flap for convenience and to help provide additional protection.
Does not contain components made from natural rubber latex to help prevent reactions from users with latex sensitivities or restrictions.
3M Disposable Protective Coverall Safety Work Wear 4520CS helps protect against certain light liquid splashes and hazardous dusts. This coverall offers a collared option for situations where a hood is not required or may interfere with alternative head,
3M Protective Coveralls are designed for use in industrial workplaces as a physical barrier to help prevent skin contact from liquid splashes and dust in certain work environments. Seamless shoulder and sleeve tops help provide increased comfort and fewer potential entry points for contaminants.
Elastic waist and ankles for convenience and freedom of movement
Two-way zipper with sealable storm flap for convenience and to help provide additional protection
Protective coverall helps protect against certain light liquid splashes and hazardous dusts
Microporous PE laminate offers a barrier against hazardous particles and liquid splashes
Breathable, SMMMS fabric back panel helps improve air ventilation and reduce heat build-up
Reinforcement gusset between the legs to help provide increased durability during bending and squatting
Meets government standards for Type 6 Splashes, Type 5 Dust, Anti-Static and Nuclear protection.
Plastic undergarments are quickly donned with no instructions needed.
Plastic undergarments provide a solution for dressing a body for viewing, preventing fumes and body damages from getting out of control.
Available in multiple sizes.
Coveralls provide light duty protection against infective agents, certain hazardous dusts, and limited liquid splashes. PE laminate material includes micropores that allow heat and moisture to evaporate from the skin and out through the suit for a lightweight and comfortable fit.
Made of a soft lightweight non-woven with microporous laminate for splash protection, strength and breathability
Protection against Type 5/6 hazardous dusts and limited liquid splashes
Type 5/6 Coverall designed to offer cost effective protection against hazardous dusts and limited liquid splashes
2 panel hood design, 2-way zip with storm flap, elasticated apertures reduce the risk of skin exposure
Anti-static coating reduces static discharge and the risk of sparks.
Protective coverall helps protect against a range of chemical jets and sprays
Heavy-duty fabric with a soft anti-static treated inner layer offers protection and convenience
Protective Cover all 4570 helps protect against a range of chemical jets and sprays, and has been certified to Type 3/4/5/6 levels of protection.
Elastic around the head for secure fit
Elastic around the face to ensure secure fit
Elastic at the calf to provide closure around the top of the footwear for protection against contaminants
Elastic around the ankle for protection against contaminants and enhanced fit
Stitched seams are sealed with a 5-layer chemically protective tape
Two storm flaps create a double seal for extra protection
Large thumb loops and zipper pulls offer convenience while wearing gloves
This suit achieves the highest-class performance on all tests and passes for helping to protect against biological contaminants.
A Versatile Protective Suit for many Applications
Knit polyester cuffs for user comfort
Anti-static, low-linting, microporous
3M Protective Cover all 4570 offers chemical hold out and mechanical strength for workers in environments with chemical exposure.
Universal size with ties to provide a good fit for a wide range of users.
The suit helps protect against hazardous dusts (Type 5), light liquid splashes (Type 6), low pressure liquid sprays (Type 4) and high-pressure liquid jets (Type 3).
Lightweight and comfortable to wear.
Cleanroom coveralls feature a military collar, raglan sleeves, knit cuffs, and a coil zipper with top snaps.
Coverall
Ultimax Grid
Knit Cuffs
Coil Zipper with Top Snaps.
Military Collar
Raglan Sleeves
Ideal for General CE Spaces/Applications (Non-ESD sensitive Medical Device, Electronics & Aerospace, Food Processing/Handling or Packaging, Cultivation Industry, University Labs, Imaging/Film coating Manufactures, General Medical/Dental Facilities).
Material: Polypropylene
Ankle Style: Elastic, Attached Boots
Cuff Style: Elastic
Neck Style: Hooded
Size: X-Large
Color: White
Closure Type: Zipper
Waist Style: Elastic
Hood Type: Attached
Seam Type: Serged.
Ideal for General CE Spaces/Applications (Non-ESD sensitive Medical Device, Electronics & Aerospace, Food Processing/Handling or Packaging, Cultivation Industry, University Labs, Imaging/Film coating Manufactures, General Medical/Dental Facilities)
Long style cleanroom coveralls feature a military collar, raglan sleeves, knit cuffs, and a coil zipper with top snaps.
Coverall
Knit Cuffs
Coil Zipper with Top Snaps.
Military Collar
Raglan Sleeves.
CleanroomCoverall-lab-2081475228.jpg "PIP Uniform Technology Reusable (Class 10) Cleanroom Coverall")
Coverall that Groundable Static Control Garment.
Coil zipper
Snaps at top of zipper
Raglan sleeves for more movement
Knit cuff
Color coded hang loop
Snaps at leg hem.
Made of bicomponent nonwoven with ultra-low linting PE laminate for a noticeably comfortable drape
3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure
Taped seams across the suit for increased hold out and strength reducing the risk of tearing and exposure
Comfortable coveralls made with high-performance fabric offer advanced quality and protection in challenging conditions such as exposure to hazardous dusts and particulates.
Anti-static coating reduces static discharge and the risk of sparks
Nuclear particulate hold out Til class 2.
Type 4/5/6 Coverall designed to offer a very good barrier to hazardous particles and limited liquid splash and spray
Protection against Biological agents.
Material: Polyethylene, Polypropylene
Color: White
Size: 2X-Large
Cuff Style: Elastic
Neck Style: Hooded
Waist Style: Elastic
Ankle Style: Elastic
Hood Type: Elastic
Seam Type: Serged.
