Excellent protection from nonhazardous particles and liquids
Strong and abrasion resistant; suitable for multiple wearings
Seamless front to provide more protection in the primary exposure areas
Combine durability and breathability to provide comfortable splash and particle protection
Zipper front with 1 in. (2.5cm) flap and elastic back
Color: White
Barrier SMS Fabric incorporates a web of microfibers that filter particulates and water-based liquids. Suitable for many applications including pharmaceutical research, food processing and more.
With elastic back, wrists and ankles.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Standard hood with elastic around the face
Made from microporous film, 50 garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Elastic wrist
Serged seams
Attached skid-resistant boots
Front zipper closure
White.
Comfort fit design based on extensive wearer input provides a comfortable garment design that enables a greater range of movement while stretching and bending, a more tailored fit, reinforcement in high stress areas for fewer blowouts, a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Optimized for comfort, softness and breathability while enabling cost savings for disposable garments
Elastic opening for tighter fit at wrist
Attached hood with elastic around face opening
Attached skid-resistant boots
White.
Coverall has elastic openings for tighter fit at wrist and ankle
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
Seeve design for greater range of motion and comfort
Clean-proceesed and sterile coveralls worn in controlled environments protect against particulates and other contaminants.
Clean-processed garments offer lowest level of particle shedding.
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Garments are gamma sterilized to SAL of 10-6
Full traceability on all sterilized apparel with sterility available.
Made from flash spun polyolefin protective material to create a barrier to particulates, nonhazardous liquids and micro-organisms
Ideal protection against micro-organisms and particulates in controlled environments.
Coveralls feature Micro-Clean with 2-1-2 polymeric resin coating that allows for thorough protection and reduction in static.
Antistatic
Bound neck and seams with zipper closure
Dolman sleeves
Elastic wrists and ankles.
Available clean processed (individually packaged) or sterilized via gamma irradiation
Coated in 2-1-2 polymeric resin.
Disposable coveralls can be easily discarded via landfill burial or proper incineration3
Long torso with polyester front zipper measures 26 in. long (66cm)
White.
Lightweight coveralls (1.8 oz. per sq. yd.) provide excellent barrier protection against nontoxic particle, liquid and spray hazards. True aerosol- and liquid-proof microporous barrier demonstrates >99% holdout of particles down to 0.35μm.
Affordable high-barrier protection
Proprietary bilaminate composite fabric provides superior liquid penetration1
Compared favorably to leading fabric in physical property tests covering resistance to ripping and tearing2
Breathable, cloth-like material treated to provide antistatic properties for use in controlled environments
Low linting for use in critical applications.
Optimized for comfort, softness and breathability while enabling cost savings for disposable garments
Elastic opening for tighter fit at wrist
Comfort fit design based on extensive wearer input provides a comfortable garment design that enables a greater range of movement while stretching and bending, a more tailored fit, reinforcement in high stress areas for fewer blowouts, a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Attached hood with elastic around face opening
Attached skid-resistant boots
White.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Made from microporous film, garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Front zipper closure
Elastic wrist
Standard hood with elastic around the face
Attached skid-resistant boots
White
Serged seams
Thickness: 10 mils.
Material rapidly dissipates vapor and heat on a microscopic level which helps to keep wearer cool and comfortable throughout the workday.
Material has static dissipative properties
Lightweight, durable microporous material delivers protection against particles, biologicals, and fluids in controlled environments. Available in 3 different styles.
Fluid and particulate barrier
Exhibits an ultra-low particle count and 99.9% filtration efficiency
Latex-free
Serged seams
White.
Available in two styles and two colors, offers a unique blend of strength, comfort, and protection in controlled environments.
Elastic back
Serged seams.
Low particle count.
Lightweight, durable material lets the wearer stay clean and comfortable all day while providing a limited barrier to particulates and contamination.
Soft polypropylene coveralls are ideal for non-hazardous environments.
Lightweight, durable material
Serged seams
No pockets.
Elastic back
Elastic wrist, ankle and back.
Made of a comfortable fabric that protects against various liquids and particulates
Coveralls are designed with tunnelized elastic that contains particle shed
Serged seams eliminate raw edges that can create and release additional particulate contamination
Sterile coveralls offer enhanced safety with attached hood and boots along with a storm flap over the zipper.
Individually packaged and sterilized to a SAL of 10-6
Low-linting fabric helps reduce the release of unwanted particulates in the workspace
Storm flap over the zipper adds an extra layer of protection
Convenient thumb loops are included to keep sleeves from riding up
Ankle ties secure the attached boots
Attached hood and boots encourages quicker and easier donning processing
Elastic wrists and ankles help prevent particulates from entering or exiting the suit
Helps keep the wearer cooler.
Strong, breathable, abrasion-resistant fabric keep workers cool and comfortable while protecting against fibers, fine dusts, and low surface tension liquid splashes
Ideal for use in dusty environments, as well as for painting, manufacture spraying, and agricultural spraying
Air and moisture vapor can pass through to aid wearer comfort
Triple-stitched serged seams
Patented Reflex design is 7.5 times less likely to rip out than ANSI minimums — provides 12% more chest room and 6% longer body length.
Stylish denim blue color masks dirt and grease
Attached hood and boots
Elastic back, wrists and ankles
Can withstand multiple wearing
Zippered front.
Provide a comfortable fit while providing liquid and particulate protection
Breathable
Lightweight outer fabric that protects the microporous film laminate
Available with elastic wrists and ankles
With or without hood
Zipper front
Microporous film laminate
Added durability and comfort liquid barrier
Particulate barrier.
Delivers effective protection against a range of chemical environments.
Utilizes P film laminated to fabric to provide a rugged and durable fabric that resists abrasion. fabric provides at least 30 minutes of protection against >124 chemical challenges. Typical applications: chemical mixing, hazardous remediation, emergency medical response, paint spraying, and nuclear environments.
Attached hood with elastic around face opening
Storm flap covers zipper which can be sealed by the wearer with adhesive strip to prevent intrusion at zipper
Fabric provides at least 30 minutes of protection against >124 chemical challenges.
Integrated socks composed of garment material
Tightly sewn seam is covered with garment fabric to reinforce seam and reduce potential for particle penetration
Elastic opening for tighter fit at wrist.
HV garments are mainly composed of flash spun polyethylene, providing an ideal balance of protection, durability and comfort. Thanks to their nonwoven structure, they are permeable to both air and water vapor, yet repel water-based liquids and aerosols.
HV garments are mainly composed of flash spun polyethylene, providing an ideal balance of protection, durability and comfort.
Thanks to their nonwoven structure, they are permeable to both air and water vapor, yet repel water-based liquids and aerosols. They offer an excellent barrier against fine particles and fibers, are ultra-low linting and antistatically treated on the inside.
Collared coverall available in fluorescent orange with silver grey retroreflective bands for day and night visibility, available in sizes SM to 3X.
Robust yet lightweight.
Their bright fluorescent orange color background material combined with silver grey retroreflective material make them highly visible during the day as well as in the night (when exposed to a light source).
Mandarin collar, elasticated wrists and ankles as well as glued-in waist elastic.
Ample crotch area for freedom of movement.
Large, easy-to grasp zipper puller.
Stitched external seams.
Auto-lock zipper and zipper flap for increased protection.
Very low inward leakage thanks to optimized design.
Lightweight and breathable CPC garments made with Gore fabric reduce overheating and fatigue while preventing liquid chemical splash penetration
Garments stitched with Gore thread
Fabrics are durable, flexible, tear and snag resistant, washable, and reusable
All seams are heat and pressure sealed with Gore-Seam tape to prevent liquid penetration
Gore membrane is a bicomponent PTFE membrane that prevents liquid penetration but allows a vapor permeation, allowing perspiration to evaporate and cool the wearer.
Coveralls
Feature two-way, heavy-duty, static-free zipper
Hook-and-loop closures on storm flap, collar, sleeves, and leg bottoms.
Double storm flap; stand-up collar; raglan sleeves.
Made using a patented flash spinning process, provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Cleanroom coveralls deliver the best balance of protection, comfort, and durability. Clean-processed and gamma sterilized.
Coverall has elastic openings for tighter fit at wrist and ankle
Raglan sleeve design for greater range of motion and comfort
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
White.
Polypropylene substrate offers greater physical strength and chemical holdout
Set sleeve pattern for greater arm movement
Provide defense for applications such as acid handling, tank cleaning, chemical handling, petrochemical market, hazardous waste cleanup, industrial hazmat teams and fire department and utilities use.
Protection against chemical splash as well as potential exposure to chemical warfare agents
Zipper front with attached hood and elastic wrists and over boots
Multilayer barrier film laminated to a lasting 2 oz. per sq. yd.
Coveralls have front-entry zipper
Tan.
Provides at least one hour breakthrough protection against 20 of the 21 standard chemicals
Coveralls offer superior protection against fire, electricity, and toxic chemicals.
Elastic wrists
Open, hemmed ankles
30 minutes of protection against 182 chemical challenges
Protects against flash fire, electric arc and liquid-chemical splash, wide range of toxic and chemical warfare agents
HazMat teams in fire departments
Coveralls are secure in fit to seal out contaminants
Respirator fit hood with drawstrings
Front zipper with storm flap, hook and loop secure
Clandestine lab investigation
Industrial fire brigades
Industrial chemical processing plants.
