Provide greater chemical holdout, offering protection from a wide variety of chemicals
Fabric consists of barrier film on tough 1.5 oz. per sq. yd. polypropylene substrate
Rugged and durable even in environments where abrasion is an issue
Great tear resistance
Gray.
Provides comfortable, quality coverall to workers for nonhazardous dry particle applications
Attached hood with elastic around face opening
Elastic opening for tighter fit at wrist
Elastic opening for tighter fit at ankle
Front zipper closure with storm flap.
10 disposable garments are designed for workers in a range of industries for nonhazardous dry particle and light liquid splash applications. Applications include: general maintenance, janitorial/cleaning and other dirty work.
10, spunbond meltblown spunbond (SMS) garments, are made to high quality standards and have been optimized for comfort, softness and breathability while offering the cost advantages of disposable garments .
The fabric provides at least 30 minutes of protection against >124 chemical challenges. Typical applications: chemical mixing, hazardous remediation, emergency medical response, paint spraying, and nuclear environments.
Tightly sewn seam is covered with garment fabric to reinforce seam and reduce potential for particle penetration
Delivers effective protection against a range of chemical environments.
SL, utilizes Saranex 23-P film laminated to Tyvek fabric to provide a rugged and durable fabric that resists abrasion.
Attached hood with elastic around face opening
Elastic opening for tighter fit at wrist
Integrated socks composed of garment material.
Storm flap covers zipper which can be sealed by the wearer with adhesive strip to prevent intrusion at zipper.
Combine outstanding particulate protection with comfort
Feature patent-pending technology, which promotes freedom of movement
Constructed of Microforce Barrier SMS abrasion-resistant fabric
Patented design provides 12% more chest room and 6% longer body length
All coveralls have zipper front with 1 in. (2.5cm) flap, elastic back and front
White.
Coveralls provide breathable splash and particle protection. Ideal for use in pharmaceutical research, fine particle contamination, aerospace and maintenance/general manufacturing applications.
Provides a more tailored fit
Offers reinforcement in high stress areas for fewer blowouts
400 Coveralls offer a comfortable design and stormflaps.
Enables a greater range of movement while stretching and bending
Comfort fit design based on extensive wearer input to provide DuPont™'s most comfortable garment design
Utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Open wrists and ankles.
Applications: Pharmaceutical industries, agriculture, cleanrooms, paint spraying, crime scene investigations, veterinary services, food
Provide breathable protection and comfort with exceptional liquid and particulate protection. White Coveralls with Hood and Boots are ideal for a wide range of industrial applications, with the added benefits of attached 3-piece respirator fit hoods and anti-skid boots.
Design: Elastic wrists and ankles, 2-way front zipper with storm flap, bound seams, finger loops, 3 piece respirator fit hood, attached anti-skid boots with SureStep soles
Low Linting: Reduces the risk of fiber contamination in some critical areas
Protection: Excellent liquid penetration resistance & barrier to fine particulates (0.01μm) including resistance to penetration of blood, body fluids and blood-borne pathogens
Comfort: Moisture vapor permeable ("breathable") to help reduce the risk of heat stress.
Lightweight and highly breathable spunbond fabric allows moisture to escape for maximum comfort
Elastic Wrist and Open Ankle Design
The coveralls offer entry-level protection against dirt and grime. Popular for agriculture, food processing, maintenance, labs, and dusty environments.
For Non-Hazardous Particulate Protection
Not made with natural rubber latex or silicone.
A45 Liquid and Particle Surface Prep and Paint Protection Coveralls designed to move with workers where hazardous or non-hazardous contaminants may be present.
The Reflex Coverall Design offers excellent fit and freedom of movement, and the hood is designed to fit with a respirator
The new skid-resistant boots that provides up to 68% improvement in traction on wet and dry surfaces when compared to our former boot material.
These garments have a hood, new skid-resistant boots, front zipper and elastic wrists and ankles (EWA) and are ideal for use in application areas where isocyanate (40%) and chromate (10%) dust protection is mandated
Allows for maximum productivity and safety for you and your employees
Each protective suit is made with lighter weight fabric (than A40) allowing for improved comfort, without sacrificing protection
They are not made with natural rubber latex and are silicone free, they pass NFPA 99 for antistatic materials, and they feature serged seams and a water-resistant zipper.
Light and durable coveralls provide coverage, including feet, while staying comfortable. For use in controlled environments with high standards for particle and microbiological contamination control.
Spinning process creates barrier to particles, micro-organisms and nonhazardous liquids
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.
Standard hood and elastic opening with elastic wrists and ankles
Attached thumb loops
Zipper closure
Attached boots, PVC sole
Lightweight, comfortable and durable
Lowest level particle shedding
Recyclable
Serged seams
Clean processed, nonsterile
Pharmaceutical, biotech, medical device, electronic settings.
Light and durable coveralls provide coverage, including feet, while staying comfortable. For use in controlled environments with high standards for particle and microbiological contamination control.
Spinning process creates barrier to particles, micro-organisms and nonhazardous liquids
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.
Lightweight, comfortable and durable
Zipper closure
Attached boots, PVC sole
Clean processed, nonsterile
Lowest level particle shedding
Recyclable
Serged seams
Standard hood and elastic opening with elastic wrists and ankles
Attached thumb loops
Pharmaceutical, biotech, medical device, electronic settings.
For use in laboratories, remediation, decontamination modesty garment, pesticides, and heavy dust environments. With open wrists and ankles.
Provide general protection against many particles
Breathable patented Microforce barrier SMS fabric passes NFPA 99 for antistatic materials
Patented Reflex design is 7.5 times less likely to rip out than ANSI minimums — provides 12% more chest room and 6% longer body length
Air and moisture vapor can pass through to aid wearer comfort
Triple-stitched serged seams
Offers high abrasion resistance and is low linting
Withstand multiple wearing’s
White.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Made from microporous film, Pro Shield 50 garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Front zipper closure
Serged seams
Collar
Open wrist
Open ankles
White
Thickness: 10 mils.
Made using a patented flash spinning process
Provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
Clean delivers an ideal balance of protection, durability, and comfort. Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio.
Elastic openings for tighter fit at wrist and ankle
Raglan sleeve design for greater range of motion and comfort.
Coveralls are antistatic and breathable and can be worn over primary thermal protective garments as a first line of defense for wearer and thermal garments underneath.
Disposable protection against nuisance contamination by solids and nontoxic liquids. Front zipper and collar with serged seams for added protection.
No elastic. Set sleeve for greater arm movement. Light blue.
Provide enhanced protection from moisture, sparks, and flames for applications in steel mills, coal mines, refineries, laboratories, and by utilities workers.
Made of nonwoven fabric wood-pulp/polyester blend treated to provide fire retardant and liquid repellancy.
Unique breathable composite material provides particulate and light splash protection for critical environments.
Coveralls feature a zipper front, serged seams, and elastic wrists, ankles, and waist.
Made from a microporous composite fabric
Serged seams
Elastic back
Covered elastic wrist and ankles
Bound neck
Lightweight
Anti-static treated
Low linting
Zipper Closure.
Provide light splash protection from chemicals commonly used at petroleum plants, including hydrofluoric acid (48%) and sulfuric acid, as well as black, green, and white liquors at paper processing plants.
Bright yellow color contrasts across a wide range of natural backgrounds for high visibility in the workplace
Constructed of lightweight fabric “Quality Coated” with polyethylene for durability and tear and abrasion resistance
Zipper front with set sleeves for greater arm movement
With bound seams.
QC is polyethylene-coated fabric provides at least 30 minutes of protection against 42 chemical challenges
Flexible and durable light liquid splash protection
Yellow for high visibility
10 mil thickness
Laydown collar
Open wrists
Open ankles.
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Made from microporous film, 50 garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Standard hood with elastic around the face
Front zipper closure covered with a storm flap
Serged seams
White
Elastic wrist
Elastic ankles
Thickness: 10 mils.
Ideal for use in controlled environments to protect against particulates and other contaminants.
Spinning process creates barrier to particles, micro-organisms, and non-hazardous liquids
Light and durable coveralls provide coverage, including feet, while staying comfortable. Use in controlled environments with high standards for particle and microbiological contamination control.
Clean processed and sterile
Serged seams
Standard hood, elastic opening
Elastic wrists and ankles
Lightweight, comfortable and durable
Lowest level particle shedding
Recyclable
Attached thumb loops
Pharmaceutical, biotech, medical device, electronic settings.
Zipper closure
Attached boots, PVC sole.
Protection: Barrier to numerous organic and inorganic chemicals and biological hazards; >480 minutes breakthrough time against 14 of 15 chemicals.
Comfort: Multi-layer material which is lightweight, yet strong and durable
Highly visible: Bright orange color for improved worker safety
Design: Elastic waist, wrists and ankles, double zip closure, double cuffs with knitted inner cuff, ultrasonically welded and taped seams, 2 piece hood
Provide strong, durable protection suitable for workers in extremely hazardous areas, including reponse teams. Orange Coveralls with Hood reach new levels in chemical protection and have been engineered to protect.
Applications: Industrial and tank cleaning, sewage purification installations, chemicals, oil and petrochemicals, pharmaceuticals, mining, agriculture, emergency reponse (Level B), first response and fire service.
