Digital Lab is used for error free transferring of different materials or data into digital formats via advanced network. This type of lab promotes real time communication between a group of people by eliminating possibility of time delay. Designed by efficient personnel, this lab consists of state of the art instruments and equipments for creating better working and learning environment. Special design of this laboratory helps to reduce its operation cost. We are a renowned manufacturer and supplier of excellent grade Digital Lab. Latest software is used to digitize video and audio files. Selected grade raw materials have been used to design this lab.
Features:
Application of latest technical knowledge
Precise diameter
Simple to handle.
Once sterile, the UHT system is then placed in process mode and the into vessel fill mode. Sterilised product then fills the vessel. The UHT/filling system and the Sterile Vessel are first sterilised in separate processes. Time and temperature for the sterilisation process is set from the touchscreen.
The Sterile Vessel is controlled via a touchscreen mounted on the unit with modes for vessel filling, vessel emptying (bottling), sterilisation and cleaning. Vessel volumes range from 10 to 30 litres.
Features:
Automated process operations
Product agitation using a sterile gas supply
10-30-litre vessel volume
Touchscreen display
Steam sterilisable by external or integral supply
Variable sterilisation protocol control from touchscreen display
Continuous level sensing
Clean-in-place capability
Can be integrated into Armfield or other UHT/filling systems.
To reduce environmental pollution it is necessary to improve the efficiency of the engine for what concerns the exhaust gases. The combustion of the fuel inside the cylinders of an engine is, usually, incomplete. The more it is incomplete, the bigger is the Emission of noxious components which can be found in the exhaust gases from the engine.
This simulator takes into consideration all the relevant subjects and in particular:
Preparation and control of the fuel and operating conditions
Adaptation to the operating conditions
Composition and control of the exhaust gases in the Otto cycle based engines
Recirculation of the exhaust gases
Anti vaporation of the fuel
Combustion products
Analysis of the exhaust gases in the Otto cycle based engines: test cycles
Lambda regulation
Catalytic thermal post combustion.
The kit offers the advantage of being ready for use immediately; it contains everything required for the exercises. The test pieces used are stainless steel bushes with various inner and outer diameters. This dimensional metrology practice kit is designed for practical training in the metalworking trades. They were manufactured with the accuracy of CNC parts. All parts are clearly laid out and well protected on a plastic tray. The trays are stackable, providing for space-saving storage. The kit includes ten bushes, all of which differ to a minor degree in dimensions and each of which is individually marked.
....
A laboratory evaporation system capable of being configured as rising or falling film, single or double effect.
Integral USB interface for computer data logging and control.
Contains vacuum pump, condenser and condensate vessel.
Temperature controlled pre-heat stage.
Adjustable re-circulation on each evaporation stage.
Manual control console.
Options to operate from external steam supply, or integral electrically heated pressurized hot water circulator.
The gauge mounts on the instrumentation frame of the test set and connects between the fuel tank and the engine under test. Fuel enters the fuel gauge from the fuel tank. The unit can be set to continuously cycle in this manner or cycle once only. All connections are made using self-sealing couplings. A solenoid valve automatically shuts off the fuel supply from the tank so that the engine draws the fuel from the fuel gauge. Sensors on the fuel gauge record the time taken to consume a set volume of fuel, and the display unit automatically calculates the fuel consumption.The solenoid valve then opens and the fuel gauge refills. The couplings ensure the fuel gauge can be connected and disconnected quickly and efficiently with minimum loss or spillage of fuel.
The gauge accurately calculates fuelconsumption and displays it directly on a digital read-out. An automatic volumetric fuel gauge for use with Small EngineTest Set and Regenerative Engine Test Set.
The boiler water feeding is got from the mains by means of a embodied circulation pump rated at 0.55 kW and electrical valve. The automatic steam generator has a 9 kg/h production capacity, at 4.5 bar pressure. The most relevant protections and warning system are also considered, such as the level indicator, pressure switches, safety valves, manometer and warning lights. The heating of the water occurs by means of three resistors with a global electric power of 7 kW.
....
The Structural Engineering 1 Learning System includes the Structural Testing Systems consisting of a workstation, bridge component sets, a test fixture set, indicator package, bridge designer software, supplemental CD, and interactive multimedia student curriculum. Civil engineers are responsible for creating structures such as skyscrapers, bridges, tunnels, dams, mass transit systems, water treatment facilities, and many more structures that we use every day for living, transportation, and industry. Structural Engineering 1 Learning System, introduces learners to the field of civil engineering. Learners will learn the fundamentals of structural analysis as well as bridge design and construction. These components are used to teach topics such as civil engineering careers, structural stability, force vectors, and bridge design.
Features:
Modular Structural Members
Structural Design Software
Interactive Multimedia.
The trainer can be upgraded to high-level automation engineer with the help of the trainer system. The Hydraulic Training System is launched to offer enriched education from basic oil pressure components, advanced oil-pressure loop design to PLC - based electrical control system.
Features:
Trainees learn PLC programming, including architecture, instructions and ladder diagram.
Trainees get familiar with the principles and applications of various oil pressure components.
Trainees learn oil-pressure loop design.
Adjustable Overshot Sluice Gate complete with user instruction sheet.
Adjustable Undershot Sluice Gate complete with user instruction sheet.
Float Operated Tilting Gate complete with user instructions and experimental manual.
Float Operated Radial Gate complete with user instruction sheet.
Floating weir gate complete with user instruction sheet.
The Electrical PWM Fault Trainer is compact, self-contained, and provides a PWM output to view the signal on an oscilloscope. The Electrical PWM Fault Trainer is designed to introduce the concepts of Electrical Fundamentals, Pulse Width Modulation (PWM) Actuator Control, and Fault Diagnosis.
The Electrical PWM Fault Trainer contains the following components and capabilities:
Power Supply providing 12VDC
ON/OFF Switch W/ LED indicator
Banana Jacks for making wiring connections
Four different value electrical loads
Fuse for Circuit/Device Protection
Four-position switch for inserting faults: (Open, High Resistance, Short to Ground, Short to Voltage)
Connector wires in three colors
Auxiliary Jacks for testing external components
Ground Jack
High/Low Frequency Selector Switch
PWM Output Jack
Faulted/Non Faulted Switch
PWM (Duty Cycle) Output Control Knob
Optional Submounts available.
Use original car battery management control system, accomplishing dynamic monitoring of each single cell voltage, dynamic estimating of battery capacity, dynamic monitoring of battery temperature, dynamic displaying of all battery information, dynamic monitoring of the total loop current, dynamic alarming indication, charging real-time control etc.
Power supply main switch, BMS battery management control unit, BMS information display screen, emergency stop switch, Jog switch, 12V switching power supply, charging and discharging socket, power supply detection terminal etc. are installed on the trainer panel. The power control unit electrical signal can be directly detected on the panel, such as resistance, voltage, current and frequency etc.
The color circuit diagram and working principle diagram are printed on trainer panel, to help students to understand and analyze the working principle of the electric vehicle battery pack management system through circuit diagram and object
Trainer base adopts steel structure welding, with spray paint treatment and self-locking casters.
220V AC power, converts to 12V DC power supply by internal circuit transformer rectifier.
Centrifugal blower and PTC auxiliary heater are installed in the internal of the trainer for simulating of discharge load of battery pack during vehicle operation.
Two hydraulic valve connected to the motorized pumping unit of the machine to activate a second frame. To activate alternatively two testing frames by using the same pumping unit. Installed on the pumping unit mod. Complete with protection case.
....
Electronic pressure sensor
Solenoid valve to generate disturbance variables
Pressure control in a tank
Software-based controlled system simulation
Experimental unit for control engineering experiments
Process schematic on front panel
Speed controlled diaphragm gas pump.
The Rotameter is used for the flow measurement. The pressure at the valve inlet is measured with the help of manometer. The air regulator and pressure gauge is provided for regulating air supply. The setup is specially designed for various experimental and demonstrative capabilities. The Stainless Steel water tanks with pump are provided for continuous water circulation. These units along with necessary piping and fitting are assembled in a painted MS Structure. The product consists of Pneumatic control valves of Linear and Equal % type.
....
Vertical Bench Top Frame A set of hangers and weights are supplied which enable the systems to be loaded. A variety of weights are supplied which gives accurate loading. The kit comprises a set of singe, double and triple pulleys that allow a simple or compound pulley system to be constructed. Hooks on each pulley set allow the easy interconnection of pulleys to generate different system. A Vertical Bench Top Frame has a backboard attached with pegboard holes throughout. Vertical Bench Top Frame allows easy and quick installation of the component parts from the kit supplied. Cords are supplied that interconnect the pulleys, but also to use to run over each pulley arranged. All component parts are supplied neatly and safely into a carry case.
....
Pattern plate with pattern of epoxy-resin in one piece
Core die, core iron
Moulding tools
Aluminum cope and drag box, screwable
Worksheets for instructor and students
15 kg moulding sand in a separate container
Thermometer
Pouring ladle with 5 kg Woods metal (melting point 70C).
The unit provides common instrumentation for all of the options. Specialized instruments are included as required with the modules. The main unit consists of an instrumentation and control console that supplies a variable flow of compressed air to the range of optional modules.
....
This is often seen in an ice skater performing a pirouette. First they spin round on an axis corresponding to their body, arms outstretched. When they raise their arms above their head, the increase in spin in considerable. Conservation of linear momentum is well understood and often demonstrated to students. Rather than go to an ice rink, students can perform this experiments in the laboratory. Equally important is the conservation of angular momentum. It is not easy to do meaningful experiments on this, but a highly visual demonstration of almost dramatic impact is the effect of reducing the radius of a rotating mass.
The resulting increase in angular velocity is considerable.
The weights are moved to the outer ends of their travel, away from the centre of rotation. The arm is then spun rapidly by hand, and the weights pulled towards the centre by the cord.
A bench mounted vertical board has a rotating arm along which two weights can be moved by a pull cord operated by the student or demonstrator.
Features:
Used for demonstration only, no measurements are intended. Demonstrates basic concepts of conservation of angular momentum through visual observation.
Low cost, effective teaching Self-contained Wall mounted High visual impact "hands-on" experience
Range of Experiments.
Features:
Ignition source with fine-adjustment valve
Stainless steel combustion chamber
Timer
Specimen holder
Gas controls and safety flashback device.
