The plane carries a free running pulley at one end and at the other end is hinged to the base plate. Consisting mostly of metal construction with a machine ground steel plane. The angle is displayed on a Clinometer Protractor on the front face of the plane. Eight sliding surfaces are supplied on opposite faces of 10 cm x 10 cm pads having a total mass of 1 Kg each. Two vertical pillars located either side of the plane carry a cross bar which can be positioned at various levels by set screws to tilt the plane. Certain materials are provided on both half area and full area of the pads. Other surfaces include steel, glass, aluminium and PVC. A knurled screw permits fine adjustment of the angle of the plane which has a maximum value of 45º. Additional loads of 2 x 1 Kg each and 1 x 500 gm together with 1 Kg weight carrier are also provided.
Applications:
Frictional effects of an inclined plane
Measures coefficient of friction between steel and various materials
Experiments of moving and static bodies.
Features:
Eight sliding surfaces of various engineering materials
Clinometer measurement for fine adjustment of plane angle
Various load masses.
The Chassis VI provides a full array of pressure gauges that show front and rear line pressures and the individual pressure at each wheel. It is a unique hands-on trainer with diagnostics. Four Wheel Trainer system incorporates live components and hydraulic lines, and is a self-contained fully working braking system manufactured with authentic, automotive components.
....
Proton Exchange Membrane Fuel Cell incorporates a unique membrane electrode assembly for the stack cells, each of which is internally reinforced and water cooled. The Proton Exchange Membrane fuel cell is one of the current leading contenders as a power source for use in motor vehicles. The fuel cell generates electrical power directly from hydrogen and air producing only pure water and heat as a by-product.
This gives the cell a high watt density and allows students to investigate a practical fuel cell with a realistic output capable of driving significant electrical loads up to 0.75kW. Unlike other educational units on the market the Proton Exchange Membrane Fuel Cell utilises an award winning module that is identical to those used in an actual vehicle power supply currently in production.
Intended use:
PCR reaction tube to be used on most standard Thermocyclers.
The Reusable Sensor is indicated for the continuous noninvasive monitoring of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (measured by an SpO2 sensor) for use with adult, pediatric, infant, and neonatal patients during both no motion and motion conditions and for patients who are well or poorly perfused in hospitals, hospital-type facilities, mobile, and home environments.
....
Sterile enteral feeding/aspiration catheters for single use
Proximal end with cup connector, conical tip, allowing the tube to be connected to devices such as feeding syringes (catheter tip) or suction pump system
Single channel tube
Open distal end with four side windows
Colour code/ external diameter: Visible on cup connector
Material: Polyvinyl chloride (PVC)
Tube with markings at 40, 50, 60 and 70cm from the distal end
Initial sterilisation method: Ethylene oxide gas
Disposable
Sterile
Length expressed in cm
Size selected: Diameter CH16, length approximately 125cm.
Measuring device equipped with light emitting diode (LED) technology and graphic LCD display. Portable Fluorometer to determine quantity of iron in food. Delivered with accessories. Assembled and packed in a portable case.
....
Materials can differ, but must be plastic providing light weight, sturdy and easy to clean slab.
The upper side has a slight slope towards the drop hole of the plate to facilitate cleaning.
Self-supporting plastic direct-drop squatting plate with footrests, moulded in LLDPE with a keyhole cover moulded in HDPE.
Keyhole cover is preferably attached and hinged.
Holes are provided on the four corners of the squatting plate and can be used to secure the plate to the ground using the provided four pegs/anchors.
The underside of the squatting plate has inserts to enable the fastening of either the Pan and “Goose neck” or Pan and “P” trap options.
The squatting plate can securely support a weight of 150kg at the centre, with the two extreme ends laying off at least 100mm of firm support (ground or beams).
Direction angle mark: the circle of the polarizing plate has obvious direction and scale mark, and the scale and the figure are clear. Product is made up of partial film, seized the polarizer?Disc diameter is not less than 170mm, the effective diameter of polarizer and seized the polarizer is not less than 120 mm.Angle indicator, minimum angle of 1 degrees, 90 degrees for a large lattice, 5 degrees for a small lattice.
....
The six hole type test tube stand is made up of plastic and the diameter is φ20±1 mm, the distance of each hole center is 25±1mm.
The distance between the orifice plate and the base is 85±2mm.
It has six tube columns, of which the diameter is φ10±1mm and the length is about 65±2mm.
The product is composed of teaching board, magnetic block and chemical device. A series of "1 to 38" serial number. Demonstration board 38, for the production of white plastic plate with 3mm thickness, the size is 80 * 45mm, the teach board back embedded two blocks with 4 * 2mm magnets, each magnet surface magnetic induction intensity is less than 20GS; 38 kinds of chemical device schematic plan printed on the demonstration board, respectively.
....
The panel is made of stainless steel sheet with a thickness of not less than 0.5mm. Filled with paraffin metal plate dimension = 140mm * 250mm * 30mm. The paraffin volume is greater than or equal to 140mm * 250mm * 10mm.
....
Chinas Political Map Model
....
Type: Battery Compartment Cover
For Use With (Equipment): Turbidimeter.
Replacement for Battery Compartment Cover of turbidimeters.
Top grain cowhide leather construction provides abrasion resistance and dexterity.
Top-grain leather construction for extended wear and comfort
Ideal for construction, machine operation, utility work, farming, roping, and other general applications
Straight thumb design.
Electricity and Electronics Fundamentals Trainer Electronic Engineering Lab
....
Logiciel ExAO and Software
....
