A small-scale Tubular Heat Exchanger system for use with an Heat Exchange Service Unit to teach the fundamental concepts of heat exchangers.
A comprehensive instruction manual is included.
Comprises a number of sections of concentric tubes, the outer section constructed from clear acrylic for visibility and the inner tube from stainless steel.
The tubes are easily dismantled for cleaning.
The Portable Pneumatics Troubleshooting Learning System features directional control valves, flow control valves, limit switches, a programmable logic controller, and software, electronic fault insertion software. Portable Pneumatics Troubleshooting Learning System provides a skill-rich, portable troubleshooting system for basic pneumatic and electro-pneumatic circuits. These industrial components will be used to study troubleshooting topics for air preparation, pneumatic actuators, vacuum systems, pneumatic systems, and more all within an innovative, portable solution that doesnt sacrifice the comprehensive knowledge and skill building for which is known. TSecondly, this system features industry-standard valves, switches, and gauges all within a portable basic pneumatic circuits learning system that can be placed on a conference room table, shop floor desk, or practically anywhere when training space is limited. his systems value is twofold: first it provides vital training experience for learners and professionals that will perform industrial maintenance, installation, and troubleshooting on pneumatic systems used in real-world automation machinery, packaging equipment, pharmaceutical applications, chemical handling tasks, and more.
Features:
Features industry-standard valves, switches, and gauges.
Uses Fault Pro, an electronic fault insertion system that is only available from to insert 30+ faults into the system for troubleshooting.
Provides a skill-rich, portable troubleshooting system for basic pneumatic and electro-pneumatic circuits.
The centrifugal force separates the heavier phase (material) and forces it towards the periphery. The feed material is poured into the rotating basket (bowl). The first material discharged will be the purified light phase. After this the heavier phase (if liquid) can be drained in the same fashion by continuing the rotation of the tube. After a couple of minutes a pitot type discharge tube is manually rotated into the spinning liquid which thereby is drained from the bowl. Alternatively, with more viscous materials and solids, the machine is stopped and the bowl quickly removed for cleaning.
Features:
Ideal for separation of solids, gums, soapstock and washwater from reacted vegetable and animal oils and fats.
All stainless steel construction
Batch centrifuge for liquid/liquid and solid/liquid separations
Maximum separation capability of 400g
Batches of up to 9L
Adjustable discharge pipe for removal of lighter liquid phase.
This dimensional metrology practice kit is designed for practical training in the metalworking trades. The test pieces used are stainless steel slotted shafts. They were manufactured with the accuracy of CNC parts. The kit offers the advantage of being ready for use immediately; it contains everything required for the exercises. All parts are clearly laid out and well protected on a plastic tray. The trays are stackable, providing for space-saving storage. The kit includes six shafts, all of which differ to a minor degree in dimensions and each of which is individually marked.
....
Disk Brake With Brake Disk:
Function of the wishbone and the drive shaft with cut-awayball-and-socket joint
Function of the suspension strut with spring and cut-awayshock absorber
Function of the disk brake with cut-away brake caliper.
PLC Controlled Pneumatic And Hydraulic Training Device uses a dedicated independent hydraulic test pump with variable speed DC motor system with oil pressure setting function. Oil lap using quick-change connectors; convenient disconnect without leakage. With this set of training equipment, you can do pneumatic control and hydraulic control circuit and its corresponding basic application experiments. You can set safe working pressure of output oil pressure. With all common hydraulic components: Each hydraulic component is equipped with mounting plate, which can be easily and freely placed in the aluminum alloy hydraulic components on the panel (the panel with T slot in the form of aluminum alloy structure). It can also be integrated with each other to carry out the following experiment: realized pneumatic - electric control, pneumatic hydraulic control, electric - fluid control, and pneumatic electric hydraulic integrated control. The experimental device uses double-sided structure, ie an experimental table provides places for doing pneumatic and hydraulic test experiment for two groups of four students. The basic configuration is as following: 1 set of pneumatic training components; 1 set of pneumatic PLC control module; 1 piece of low noise air compressor; 1 set of hydraulic training components; 1 set of hydraulic PLC control module; 1 piece of hydraulic test pump. The optional configuration is the computer. It can simultaneously do double-sided comprehensive pneumatic and hydraulic experiments, optimizing and sharing resources and improving products performance. Its overall structure is simple and practical. The training equipment is iron double matte dense spray pattern, which is beautiful, durable and practical.
....
Beam mould 140x140x560 mm.
....
Structure:
The Presses have good rigid structure for accurate works.
Hydraulic Cylinder:
All chevronseals & bronze strip used for leak proof performance. Ram will be made frommaterial & surface ground hardened for long life of seals & corrosionresistance. Our Presses are powered by specially designed Double ActingHydraulic Cylinders. Cylinders manufactured out of quality steel. CylinderBores will be honed to mirror finish or long life of piston seals.
Power Pack Unit:
Our Presses are powered by specially designed Power PackUnit having Oil Breather, Gear Pump,Flexible Coupling, Electric Moto, Hand Lever operated Direction Control Valve, Oil Level Indicator, Suction Straine, Pressure Gauge, Oil Tank, Return Line Filter, Internal & External Pipe Lineetc.
Composed of of Kit For The Study Of Digital Electronics
Sub module with Flip Flop JK Master Slave
Sub module with Flip Flop D Master Slave
Sub module with 4 AND gates and 4 OR gates
Sub module with 4 EXOR gates and 6 NOT gatesv
Sub module with 4 NAND gates and 4 NOR gates
Sub module with multiplexer and Demultiplexer
Sub module with oscillators
Sub module with latch & buffer circuit
Sub module with up down counter
Sub module with 7 segment display
Sub module with shift register.
The water flows through a pipe with a valve and flow meter before passing through the measured sections. The section under test is connected with a hose. It is possible to measure the pressure loss and to investigate the effects of material, surface roughness and flow rate. Four measured sections are fitted to the panel, each comprising ten elbows and bends in different layouts. The overall length of each section is the same.
....
Integration skills across multiple stations as well as skills specific to an individual station are covered in the balance. Overall system skills include discrete I/O handshaking, system start-up/halt, system stop reset, and FMS programming. The Programming For Educational Training boasts a robust 10 Learning Activity Packets (LAPs). Stations can be easily moved apart to function as individual workstations by releasing two quick connects and one plug-in cable. Stations can also be mixed and matched, enabling instructors to build and change the system as budgets allow or needs change. All mechatronics stations teach operation, sequencing and programming skills. Many mechatronics station combinations are available to support your needs. The first two LAPs concentrate on skills core to all stations: an introduction to mechatronics design, systems concepts, safety, machine operation, sensors, pneumatic pick & place, and electrical pick & place. The Programming For Educational Training includes the Allen-Bradley Programmable Controller, a PLC Portable Mounting Console, 24 VDC Power Supply, Master Control Relay, a Student Learning Activity Packet Set, a Teachers Assessment Guide and an Installation Guide.
Features:
Operation, sequencing, and programming skills
Optional Online eBooks
Introduction to Mechatronics
Discrete I/O handshaking
Student Reference Guide.
The main feature of the machine is that the cradle, in which the rotor to be balanced is supported, has only one degree of freedom which is that of rotation in a horizontal plane about the axis of the crossed spring pivot. The Static and Dynamic Balancing Machine has been developed to provide means for accurate experimental work in the balancing of rigid rotors. The position of the rotor in the cradle is adjusted so that one of the correction planes contains the axis of the cradle suspension and the rotor is balanced for moments about this correction plane by adjustments in the other correction plane. The design of the machine adheres to industrial practice and the machine may be used to balance real rotors of up to 152 mm (6") diameter and 450 mm length in addition to the fivedisc rotor provided. In either case the rotor is then completely balanced, both statically and dynamically. The rotor is then turned round in the cradle and balanced for moments about the other correction plane, or alternatively it is balanced statically.
Experimental Capability:
Four vector method of balancing, two- or three- vector method
Static balancing
Nodal point balancing
Pivot cradle balancing
Analytical analysis of unbalance
Graphical analysis of unbalance.
The trainer is a fully functional system, which incorporates all live components, fault insertion and complete on board computer diagnostics in order to give the student a complete understanding of the system. Two Wheel Trainer state of the art program was specifically designed to teach both the hydraulic and electronic aspects of the system.
....
Intended use:
Various clinical laboratory usage conditions including; Sample/reagent preparation, incubation, centrifugation, vortex, cold storage.
Sterile enteral feeding/aspirating catheter for single use.
Proximal end with cup connector, conical tip, allowing the tube to be connected to devices such as feeding syringes (catheter tip) or suction pump system.
Single channel tube.
Colour code/ external diameter: Visible on cup connector.
Open distal end with four side windows.
Tube with markings at 40, 50, 60 and 70cm from the distal end.
Length expressed in cm.
Material: Polyvinyl chloride (PVC).
Sterile
Disposable
Initial sterilisation method: Ethylene oxide gas
Size selected: Diameter CH12, length approximately 125cm.
Complete Vergnet hydro-pump, but supplied with 20 metres each of complete pressure (command/transmission) and riser (discharge) pipes.
....
Can demonstrate damped oscillation and amplitude oscillation phenomenon, the inductance with second gear, capacitance also with second gear to get four different frequencies of oscillation amplitude, oscillation damping, needle visible pendulum supported more than 4 times, panel size is not less than 450mm * 320mm.
....
By making small globe, students are familiar with longitude latitude, equator, north-south regression line, polar circle and international dividing line on globe, and understand geography knowledge: obliquity, day and night cycle, distribution of main mainland and marine on earth.
....
The product is mainly composed of a demonstration board 1 sets, 5 sets of electrolyzer, lamp etc. Products use the power supply voltage: 4V ~ 6V. The demonstration board seat is made of ABS engineering plastic, which is provided with a socket 5 and socket, wiring terminal, wiring diagram printed on the demonstration panel, a demonstration board seat size 360 x 140 x 260mm; electrolytic cell by a transparent box, a box cover and a connecting wire electrode, etc.
....
