The diameter of the pillar is 170mm so that it can offer the perfect support while the machine is in the operational mode. The drilling capacity of this drill machine is 40mm which is perfect for different types of industries.
....
It supplies the power necessary for the operation of the boards of digital electronics.
Technical Features:
1 CLK2 pulse generator, 5V amplitude, variable frequency from 1Hz to 1 kHz, rise edge synchronized with CLK1
8 logic variable (true and false) generators
3 stabilized and protected dc outputs
+12V/500mA, +5V/2A, 5.2V/500mA
1 CLK1 square wave generator, 5V amplitude, variable frequency from 1Hz to 1 kHz
9 LED for visualization of the logic states
Power supply: single phase from mains
Power Supply
Designed for electronics laboratories. Its main purpose is to realize a power supply source with high safety features and remarkable electric performance.
Output voltages of Power Supply for Digital Electronics
2 ac power supplies: 0250V/1A and 025V/2A isolated from the mains
Series of sockets: 220 V, 10/16A
2 independent stabilized supplies: 030V, 02 A, complete with digital instrument for voltage and current. Possibility of tracking.
Fixed dual supply: 24V/1A
Fixed dual supply: 5V/1A
Fixed dual supply: 12V/1Av.
Electrical components for the start and operation of the compressor mounted clearly visible
Lab jacks and cables to connect the electrical components
Experimental unit from the practical series for the training of mechatronics engineers for refrigeration
Circuit diagram on the front panel for easy identification of the components
Refrigerant circuit with compressor, receiver, 2 valves and 2 manometers to investigate pressure switches on the delivery and intake sides
Operation of a thermostat
Correct electrical connection of a refrigerant compressor.
Derivative action controller suitable for closed loop continuous control systems.
....
Control valve: electro-pneumatic control valve
Digital industrial controller, parameterisable as a P, PI or PID controller
Large process schematic on front panel
Experimental unit for control engineering experiments
Generation of disturbance variables by needle valve
2 Manometers
Process variables X and Y accessible as analogue signals via lab jacks
Pressure control of a 2nd order controlled system with 2 pressure tanks
Pressure measurement by pressure sensor.
Material: Needle: Stainless steel
Measurements: External diameter expressed in Gauge and millimetres.
Base and protective cap: medical grade plastic.
Length expressed in inch and millimetres.
Size selected: 22Gx1 1/4” (0.7x30mm).
Sterile
Disposable.
Simple Lever Balance
....
It is indispensable equipment applied to some experiments in control laboratories and colleges, high schools and middle schools, and plays the role of heat preservation and heating.
....
The instrument consists of a calorimeter, transparent plastic pipe, tube, tube clamp, tape, measuring cup, pan etc.
....
Features knit cuffs for increased protection and a traditional collar; Back vent helps keep wearer comfortable and cool
These protective lab coats have 6 snaps in the front and 3 reinforced pockets
Included neck loop means your employees can hang the lab coat wherever it's convenient
The mid-calf length protective coat has knit cuffs, for greater protection, and a traditional collar. Plus, the lab jacket has three reinforced pockets, six snaps and a back vent for increased comfort and ventilation. The neck loop makes it convenient to hang, whether you’re using a lab coat in a research laboratory or an industrial environment. Lab Coats with Knit Cuffs + Extra Protection from Kimberly-Clark give your team a blend of comfort and protection in environments where the potential of exposure is low to moderate for chemicals or fluids. In fact, the 3-layer SMS fabric, a nonwoven fabric offers exceptional resistance to blood strike-through at various levels of exposure. Kimberly-Clark Professional is a respected name in protective apparel, enabling you to deliver the reliable protection you’re required to provide and the peace of mind your team deserves.
Each unisex lab coat is made of a 3-layer (nonwoven) fabric, for wear when there is potential low to moderate exposure to chemicals or fluids.
The Kaplan turbine is a reaction turbine with an axial through flow. It has a high specific speed and is suitable for large water flows and small to medium heads. Water turbines are turbo machines which convert water energy into mechanical energy. Mostly, they are used for driving generators for power generation purposes. Therefore, the Kaplan turbine is used as a "classic" water turbine in run-of-the-river power stations. The helps to investigate the characteristic behaviour of a simple-regulated Kaplan turbine during operation. The turbine is loaded with a wear-free eddy current brake. The speed is captured by means of an inductive, non-contact position sensor at the turbine shaft. For determining the turbine power, the eddy current brake is equipped with a force sensor for torque measurement. The trainer is provided with a closed water circuit with tank, submersible pump and throttle valve for adjusting the flow rate. The angle of incidence and thus the power output of the impeller are changed by adjusting the guide vanes.
....
The temperature of the condensing water vapour in the hypsometer can be determined accurately using the software or tables in the manual, providing knowledge of the barometric pressure is known. The water level is simply raised to change the hypsometer into a variable temperature water bath.
A bench top unit designed to introduce students to temperature, temperature scales and commonly available devices to measure temperature.
Temperature sensors with different thermometric principles and characteristics are supplied. An accurate platinum resistance thermometer with five point calibration certificate and temperature indicated directly in deg C, is included for reference.
The equipment comprises a hypsometer/hot water bath and ice flask to generate accurate fixed points (the condensation point and triple point of water) and variable temperatures.
Function of the high-pressure pump, distribution, injection control and quantity control.
....
The interior mechanical structure and function of car is clearly understood under its demonstration and operation to make students and learners raise their initial knowledge of the car's structure and its working principle. Transparent Lucid Whole Model of educational training equipment is professional teaching equipment for colleges, secondary vocational and technical schools, car driving training and car repairing field.
....
Concrete flexural machine 150 kN open sided frame, motorized with control unit (semi-automatic model) to perform flexural tests on concrete beam specimens max. dimensions 200x200x800mm, tiles, slabs, masonry units, flat blocks, flagstones, kerbs, and any type of material having max. size 600x250 mm (lower rollers max. length 1325 mm).
....
Features:
Column, Arm, Work Head And Gears are made out of Closed Grain.
Spindle Ram is made out of Alloy Steel.
Parts Properly Balanced
Prior Assembling of Main Gear And Pully
Parts Finished on imported Grinding Machine
All moving parts Finished to close Tolerance.
This board allows the study of the following subjects:
MSI circuits in TTL logic, shift registers, synchronous and asynchronous counters, astable and monostable multivibrators, seven segment displays.
The board is composed of:
4 JK/MS flip flop
2 D flip flop
A binary 4 bit synchronous counter
A Shift register, 8 bit SI SO
A BCD asynchronous counter
A BCD synchronous counter
2 BCD rotating switches
8 capacitors
2 BCD 7 segment decoders
2 7 segment displays
2 linear potentiometers
A binary 4 bit asynchronous counter
2 Monostable multivibrators.
Integral action controller suitable for closed loop continuous control systems.
....
Flow measurement by rotameter with electrical output
Generation of disturbance variables by ball valves with scale
Tank with overflow and scale
Experimental unit for control engineering experiments
Level and flow control individually, and cascaded
Large process schematic on front panel
Key process variables accessible as analogue signals at lab jacks
Level measurement by pressure sensor
Control valve: electromagnetic proportional valve
2 digital industrial controllers, parameterisable as P, PI or PID controllers, cascade.
Material: Needle: Stainless steel.
Measurements: External diameter expressed in Gauge and millimetres.
Base and protective cap: medical grade plastic.
Length expressed in inch and millimetres.
Sterile
Disposable.
Size selected: 25Gx5/8” (0.5x16mm).
