Investigation of the fundamentals of different areas of incompressible flow
Horizontally travelling level gauge with vertically travelling probe tip to measure the water levels
Pressure measuring points for differential pressure measurement before and after the respective pipe resistances
Experiments on pressure losses at pipe bends and pipe angles, Venturi nozzle, orifice plate
Closed water circuit with pump
Transparent pipe section and open channel
One broad-crested weir and one sharp-crested weir.
It is composed of wheel( including the φ120mm's large wheels and φ60mm's small wheel), hob, iron shaft, connection blocks, the rocker arm, and the balance block etc.
It is used to demonstrate the lever principle of the axle.
Quick-release 5-snap front
Knit cuffs
Unisex Lab Coats are made of breathable, comfortable, 100% cotton fabric and feature a quick-release five-snap front and knit cuffs.
2 oversized waist pockets
Breast pocket with pencil slot
100% cotton.
Investigation of pressure losses in piping elements and shut-off devices
Measuring objects made of transparent material: Venturi nozzle, orifice plate flow meter and measuring nozzle
Shut-off devices: angle seat valve, gate valve
Different measuring objects for determining flow rate according to the differential pressure method
One pipe section to hold interchangeable shut-off/measuring objects
2 twin tube manometers for measuring the pressure difference
Annular chambers allow measurement of pressure without interaction
Six pipe sections capable of being individually shut off, with different piping elements: sudden Contraction, sudden enlargement, Y-pieces, T-pieces, corners and bends.
Controls static electricity
Elastic back and drawstring front for secure comfort
Cleanroom ESD scrub pants control static electricity while providing an ideal base-layer of protection for any cleanroom garment system.
Color-coded loops for easy size identification.
Elastic and snaps for leg opening.
Measuring weirs for installation in the experimental flume
Discharge measurement in open channels using 2 measuring weirs
level gauge can be positioned anywhere along the experimental flume
level gauge with scale for determining the head
Rehbock weir with rectangular profile.
Thomson weir with V-profile.
The trainer enables actual service test equipment to be used for diagnostic procedures, such as digital meters, breakout boxes, oscilloscopes and standard scan tools, including those having bi-directional and snap shot functions. The procedures used to diagnose trainer faults to be the same as performed on a vehicle. The program includes courseware for use by students and instructors. The Diesel System Trainer presents the real-world operation and study of the diesel fuel injection system.
Features:
Electronic Control Module (ECM)
Glow Plug Relay with Indicator Light
Fuel Pump Relay with Indicator Light
Engine Coolant Temperature Sensor
Malfunction Indicator Light (MIL)
Intake Air Temperature Sensor
Fuse Block
Standard Diagnostic Tool Connector (DLC)
Service Throttle Soon Light.
Educational Advantages:
A fully functional vehicle lighting and accessory system can be used for demonstrations and diagnosis/troubleshooting assignments.
Functional doors with power locks and windows can be used for instruction of circuit operation.
Students have clear access to all vehicle lighting and accessory systems and components without the access limitations of body panels.
Functional instrument panel with indicators
Students can use included wiring diagrams to assist in trainer diagnosis and troubleshooting
Multi-function switch operates as in a real vehicle.
DLC allow OEM bi-directional control using a scan tool for applicable circuits
Trainer comes equipped with a 120VAC to 12VDC protected power supply.
Scan tools can be connected to the DLC providing OEM data stream information, trouble codes and diagnostic PIDs for student diagnosis and troubleshooting.
Main Features:
Built using OEM headlights, daytime running lights (if equipped), dimmer, hazard lights, turn signals, brake lights, switches, horn, functional instrument panel, functional multifunction switch and accessories of a modern vehicle.
Built-in lockable fault insertion box with 6 faults.
Includes doors with functioning power door locks and windows.
Includes a 55A power supply unit with built-in 12VDC converter.
Includes functional vehicle CAN Bus multiplexing system with BCM (body control module) and DLC (data link connector) for scan tool hookup.
OEM power distribution center with OEM wiring.
Best in class flammability protection.
Safety sleeve cuff with tunneled elastic
Princess-belt on back
Reusable FR fabric
Quick-release snap front
Excellent heat-resistance properties.
FR identification patches on sleeves and back.
These flame-resistant lab coats were developed specifically to fit the female form while also providing the protection required in many of today’s high-tech laboratories and research facilities.
Measuring device for determining the jet diameter
Determining the contraction coefficient for different contours and diameters
Pitot tube for determining the total pressure
Pressure display on twin tube manometers
Tank with adjustable overflow
5 interchangeable inserts with different contours
Study of pressure losses in vertical flows from tanks.
Measuring device for determining the jet diameter
Determining the contraction coefficient for different contours and diameters
Pitot tube for determining the total pressure
Pressure display on twin tube manometers
Tank with adjustable overflow
5 interchangeable inserts with different contours
Study of pressure losses in vertical flows from tanks.
This trainer presents the operation of a Locking Differential/Limited Slip Rear Axle.
Features:
Complete Differential/Axle
All frame surfaces powder-coated for durability and easy indentification
Slip Traction Control System
Carrier and Pinion Areas Cutaway for Easier Viewing/Instruction
Includes casters to simplify movement.
The Cutaway Variable Displacement swash plate type design is equipped with an operational 12VDC electromagnetic clutch that can be applied or disengaged with a switch. Also includes a feature that allows the demonstration of improper performance caused from a slipping compressor.
Main Features:
Can demonstrate the improper performance caused from a slipping clutch.
Allows visualization of variable displacement swash plate type design is equipped with an operational OEM 12VDC electromagnetic clutch.
Driven by hand crank.
Clutch control is protected with a 5A replaceable fuse.
Requires a separate power supply or 12VDC battery to operate.
Provides high performance protection in the most demanding applications.
Five layer PE and EVOH constructions provides excellent chemical resistant to over 280 different chemicals including alchohols, aliphatics, aromatice, chlorines, ketones and esters.
Flow velocity, water supply and water drain in sources/sinks as well as dosage of the contrast medium Can be adjusted by using valves
Visualisation of streamlines
Water as flowing medium and ink as contrast medium
Bottom plate with water connections for generating sources/sinks
Sources/sinks can be combined as required
Rubber plate for creating your own models included
Upper glass plate, hinged for interchanging models
Different drag bodies and changes in cross-section included.
The ABS / TCS System trainer runs actual Service Manual test procedures, and all wire colors are consistent with the original vehicle schematics. This ABS / TCS System trainer provides for an advanced level of instruction by duplicating actual on vehicle operation and troubleshooting.
Features:
Antilock Mode or Traction Control Mode Operation
Class 2 “Bus” for Communications with Scan Tools
Realistic Accelerator and Brake Pedal Operation
Fault Insertion Locally with Keypad or Remotely
Torque Request/Torque Delivered Indicators
BPMV Solenoid Operation Indicators
Selection of “Controlled Wheel” (LF, RF, LR, RR)
Road Condition Selectable: Dry, Wet, Snow or Ice
Courseware Included (Student Manual, Instructor Guide, Service Manual Information).
Terminal block receptacles are provided for diagnostic test points. The trainer requires a 12V power supply to operate. The Blower Motor System Trainer allows for the demonstration of a complete blower motor system using real-world components.
Educational Advantages:
Four operational faults can be inserted to promote student diagnostic troubleshooting competencies.
Ability to test and verify a basic blower motor circuit.
Ability to visualize the operation of a blower motor control unit.
Includes wiring schematics.
Included Components:
Blower motor resistor.
Fault box with 4 faults.
HVAC control module.
Blower motor.
Test points for diagnosis.
Box Size: 120 × 70 × 60mm; Power: DC3V (two batteries of NO.5); Diode:1N4001; Resistance: the error does not exceed ± 5%.
....
Static-free — no clinging
Made of soft three-layer SMS (Spunbond/Meltblown/Spunbond) fabrics.
Autoclavable and washable up to five times
Latex- free, fire retardant.
Fluid- resistant, breathable
Hip length
Snap front, three pockets, knit cuffs and collar.
Transparent tank with overflow ensures constant water inlet pressure in the pipe section for experiments with laminar flow
Investigation of the pipe friction in laminar or turbulent flow
Flow rate adjustment via valves
Twin tube manometers for measurements in laminar flow
Dial-gauge manometer for measurements in turbulent flow
Water supply via or via laboratory supply for experiments with turbulent flow.
