Vaccine storage capacity: 51 L
Volume category: <60L
Refrigerant: R600a, 45 grams
Energy consumption, stable running (kWh/24 hours): 1.63
Equipment operating voltage and frequency: 220-240 Volt, or 100-127 Volt and frequency 50Hz or 60Hz, 1ph.
Operating temperature: Min and Max rated ambient temperature: +10°C and +43°C
UIFPF- Grade A
Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Volume category: <60L
Vaccine storage capacity: 37.5L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Refrigerant: R600a, 90 grams
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Cabinet Type: Upright
Capacity: 578L
Adjustable cabinet temperature set point -40°C to -86°C
Volume Category: ≥ 300 <600L
Storage temperature: up to-86°C
Operating ambient temperature: +10 °C - +32°C (Temperate zone)
Power requirement: 220-240V/50Hz.
Material: Metal base
Badge, metal, round, cyan blue
Size: Diameter 55mm
Position of Logo: Logo vertically centered, running 80% of the diameter of the badge.
Color: Cyan blue.
Logo height: 7mm.
Logo length: 47mm.
Inflatable beach ball without the use of a pump with a child friendly design.
Dimensions of beach ball:
Circumference: approx. 132cm
Diameter: approx.42cm (inflated)
Material:
Supplied with:
The repair kit consists of an adhesive vinyl patch measuring 4.5 x 5.5cm.
A transparent vinyl plastic repair kit, with instructions in English for repairing a puncture.
Identity card holder (lanyard), polyester, 20mm wide, in 100% Cyan blue with 1 colour imprint (white) with safety clasp and suspension
clip with PVC strap, packed in a bag of 50.
Electrocardiographs are used to diagnose cardiac abnormalities, determine a patient's response to drug therapy, and reveal trends or changes in heart function. Multichannel electrocardiographs record and display signals from two or more leads simultaneously. Electrocardiographs differ from ECG monitors, which provide a continuous real-time display of the ECG waveform and other physiologic measurements on a screen and warn of potentially life-threatening or precursor rhythms.
Electrocardiographs detect the electrical signals associated with cardiac activity and produce an ECG, a graphic record of the voltage versus time. They are used to diagnose and assist in treating some types of heart disease and arrhythmias.
Childbirth simulator for training in normal as well as abnormal deliveries including complete, frank, and footling breech
Allows training in normal delivery of umbilical cord and placenta
Comes with full term foetal baby with fontanelles, umbilical cord and placental
Anterior and posterior foetal fontanelles can be palpated
Consists of a full size adult female lower torso with a life-size pelvic cavity and major anatomical landmarks
Realistic simulation of Caesarean-section delivery, Ritgen’s manoeuvre, and intrauterine manipulation
Removable diaphragm end plate for manual positioning of foetal baby/babies
Simulation of multiple pregnancies in vertex/vertex, vertex/breech, breech/vertex, or breech/breech presentations
Can be used to demonstrate placenta praevia and prolapse of the umbilical cord
With soft vulval inserts for episiotomy exercises.
With inflatable uterus insert that allows for the performance of Leopold’s manoeuvres.
Container, round.
Smooth surface.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Reusable.
Capacity: approx. 550 - 650 ml.
Inner diameter: approx. 115-135 mm.
Height: approx. 50-70 mm.
Thickness: approx. 0.75-0.85 mm.
An electrically powered device designed to deliver high-flow (exceeding peak inspiratory flow) heated and humidified ambient air or air/oxygen to a neonatal patient as part of non-invasive ventilation (NIV); it may additionally be used with a water tank to produce bubble continuous positive airway pressure (bubble CPAP). It is intended for use by a healthcare provider on a spontaneously breathing patient in hospital settings. It consists of a medical air input, an oxygen input, an electronic gas mixer, a heating element, and humidification chamber.
....
A device designed for total elimination and/or inactivation of microorganisms from medical devices and related products using pressurized steam (i.e., moist heat) as the sterilizing agent; it is used for products non-sensitive to high temperature, water, or steam. The device comes without a heating source and can be heated through a kerosine stove, electrical heater or even an open fire. It includes a treatment chamber with an inner container, it may be intended to sterilize wrapped and/or unwrapped devices.
....
Nitrile examination gloves provides protection from chemicals and micro-organisms. Non-sterile.Medical examination gloves used for medical procedures to protect both patient and medical staff from cross-contamination. and strictly SINGLE USE.
....
Users guide School in a Box Kit, French Module 4.
....
Wheelchair, manual, active urban, folding frame with more POSTURAL SUPPORT (with arm supports and taller back support):
POSTURAL SUPPORT: For CHILD and ADULT users who can sit upright and balanced but who need a taller backrest AND/OR arm support, as well as those needing additional support such as configuration of wheelchair set-up and/or addition of postural support devices. Relationship of seat, back-, arm- and foot support dimensions anatomically appropriate for size of wheelchair.
FUNCTION AND ENVIRONMENT: For people who self-propel, as well as those who need assistance. For use in urban indoor and outdoor settings. If assisted, also for peri-urban outdoor settings.
SUPPLIED WITHOUT CUSHION.
-lab-532880853.jpg "Flak Jacket,FEMALE,size S(B cup)")
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear extraction grab strap (for speedy evacuation of injured/ casualties), detachable comfort lining. Fitted with front, rear, and side external pockets for insertion of hard ballistic plates. Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state, includes clear plastic ID sleeve. Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, back coated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellency. Black webbing to attach accessories.
Standard equipment:
Anti-theft device
Clutch lever lock
Hand protectors
Headlight, front
High air intake
Brake light
Cargo carrier, front & rear
Horn
Lamp protection
Sump guard
Tail light
Lockable fuel tank lid
Rear view mirror, 2 pcs
Side indicators, front & rear
Speedometer
Tool kit, basic.
The water level indicator consists of a flat, two cores, heavy duty cable calibrated in metres and centimetres on one side.
A stainless-steel probe is securely fastened to the free end of the cable and the cable with probe is attached to a cable winding reel. Measurements are taken by slowly lowering the cable with probe down the borehole until the probe comes in contact with the water.
Water level depth indicator, battery powered (3 x 1.5 V, included and easily replaceable), for use in boreholes to a maximum depth of 150 metres.
The unit is also equipped with an optical (light) signal that switches on upon contact of the probe with water. On contact with the water, the unit emits a high frequency audible signal, and the user can then take a depth reading from the calibrated cable.
-lab-604952388.jpg "DOUBLE OPEN ENDED SPANNERS (ELLIPTICAL PATTERN MIRROR FINISH WITH SLEEVE)")
Drop forged from high quality Chrome Vanadium Steel
Induction Heat treated.
MACHINIST HAMMER WOOD HANDLE
....
Hardened & Tempered
Chrome Vanadium Steel
Induction Hardened
Insulated Sleeve made of Virgin Acetate
