Cold box, Long term vaccine storage.
Storage capacity: 5.4L
Operating Ambient Temperature: +43°C
Vaccine storage Temperature: +2°C to + 8°C
Cold life at +43°C: 35 Days.
Vaccine storage capacity: 98.5 L
Volume category: >/= 60, <120L
Refrigerant: R600a, 45 grams
Energy consumption, stable running (kWh/24 hours): 1.23
Equipment operating voltage and frequency: 220-240 Volt, or 100-127 Volt and frequency 50Hz or 60Hz, 1ph.
Operating temperature: Min and Max rated ambient temperature: +10°C and +43°C
UIFPF- Grade A.
Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Vaccine storage capacity: 100L
Volume category: >/= 60, <120L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Refrigerant: R600a, 135 grams
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Capacity: 828L
Cabinet Type: Upright
Volume Category: ≥ 600 <900L
Operating ambient temperature: +10 °C - +32°C (Temperate zone)
Storage temperature: up to-86°C
Adjustable cabinet temperature set point -40°C to -86°C
Power requirement: 220-240V/50Hz.
Finishing: trimming to A4 size and packing 4 x 25 colors of each in a resealable plastic bag.
Paper: 180 GSM Bristol paper, 4 assorted pastel colors, pack of 100 sheets.
Size: A4
Armband, cloth.
Material - 220 gsm 100% washed cotton twill.
The material is color-fast, durable and easy to wash.
Adjustable Velcro closure consisting of two horizontal Velcro strips;
length 120mm x width 30mm; sewn along the outer side of the armband.
A third vertical Velcro strip sewn on the underside of the armband,
height 80mm x width 30mm
Color: 100% Cyan Blue
The colour is durable and does not bleach easily in strong sunlight.
There is no leaching of colour when the armband comes into contact with water.
Size: length 420mm x height 80mm.
Volley-ball net, official size 9.5 x 1m with minimum 100mm nylon mesh, thread size minimum 2mm; nylon headband, sides and bottom finished with heavy over lock stitch, 3mm steel cable; without standards or posts.
....
Foetal baby, with umbilical cord and placenta.
Full size, flexible term foetus with lifelike features
Umbilical cord and placenta present for training in cord ligation
Realistic placenta for training in placenta expulsion exercises
With smooth, soft skull containing anterior and posterior fontanelles for training in realistic delivery,
Can be used in training of Vacuum deliveries
Should fit into advanced childbirth simulator.
Basic container for nursing and surgical care.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Reusable.
Contaner, round.
Smooth surface.
Capacity: approx. 170 to 190ml.
Inner diameter: approx. 75-85 mm.
Height: approx. 36-48 mm.
Thickness: approx. 0.75-0.85mm.
Fully automated external defibrillators (AEDs) deliver a high-voltage electrical impulse to the heart in order to restore normal rhythm and contractile function in patients who are experiencing ventricular fibrillation (VF) or ventricular tachycardia (VT) that is not accompanied by a palpable pulse. AEDs are designed for use primarily by first responders to cardiac emergencies, who may not be fully trained in advanced cardiac life support (ACLS). In the prehospital setting, these emergency personnel can include EMTs, firefighters, and law enforcement officers. Flight attendants, security guards, and others −sometimes called targeted responders may be expected to use PAD units. AEDs differ from conventional manual defibrillators in that AEDs can analyse the ECG rhythm to determine whether defibrillation is necessary; this eliminates the need for the user to interpret the cardiac rhythm before delivering a shock. AEDs can also be used in areas of the hospital where advanced life support personnel are not readily available.
....
The device comes without a heating source and can be heated through a kerosine stove, electrical heater or even an open fire. A device designed for total elimination and/or inactivation of microorganisms from medical devices and related products using pressurized steam (i.e., moist heat) as the sterilizing agent; it is used for products non-sensitive to high temperature, water, or steam. It includes a treatment chamber with an inner container, it may be intended to sterilize wrapped and/or unwrapped devices.
....
To dilate the cervix of the uterus in order to make room for the insertion of instruments.
Static function instrument: uterine dilator.
Double ended with round, smooth, atraumatic ends.
Material: Austenitic steel (non quenched, non magnetic steel).
Austenitic steel composition: 16 - 18 % chromium; 10-14 % nickel; 2-3 % molybdenum.
See Martin Catalogue no. 24 Ref: 32 430 82.
Provided in sets of 8 (16 dilators).
Reusable.
Sizes: 3 - 4 mm to 17 - 18 mm diameter in canvas roll.
Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric
Raglan long sleeves, non-deforming cuffs in jersey: 12cm (+/- 10%)
Washing: normal; withstands boiling and autoclaving; resists to chlorine 0.1%
Multiple use
Finished length of the gown: approximately: 130cm (mid-calf) (+/- 10%)
Tie back closure and covering back panel lateral tie fastening
Colours: blue or green
Weight per m2: 135g-190g.
Calibration control vial for portable fluorometer to determine quantity of Vitamin A content in foods and biological fluids.
....
Printing: Inside 4 colors CMYK recto/verso, Cover 4 colors recto/verso plus matt lamination recto only.
Binding: Saddle Stitched
Size: Closed A4 (Portrait) Open A3
Number of pages: Inside 60, cover 4
Paper: Inside, FSC certified 115 Matt Coated. Cover, FSC certified 250
GSM Matt Coated
Paper: Inside, FSC certified 115 Matt Coated. Cover, FSC certified 250 GSM Matt Coated.
Wheelchair, manual, active urban, folding frame:
FUNCTION AND ENVIRONMENT: For people who self-propel. For use in urban indoor and outdoor settings.
Relationship of seat, back-, arm- and foot support dimensions anatomically appropriate for size of wheelchair.
POSTURAL SUPPORT: For CHILD and ADULT users who can sit upright and balanced without additional support, as well as those needing additional support such as adjustment of wheelchair configuration and/or addition of postural support devices. Users who do not need high back support AND/OR arm supports.
SUPPLIED WITHOUT CUSHION.
-lab-2086852395.jpg "Flak Jacket,FEMALE,size S(D cup)")
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear extraction grab strap (for speedy evacuation of injured/ casualties), detachable comfort lining. Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting. Fitted with front, rear, and side external pockets for insertion of hard ballistic plates.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state, includes clear plastic ID sleeve. Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, back coated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellency. Black webbing to attach accessories.
Standard equipment:
Supplied with helmet
Engine (124 cm3):
Stroke cycle: 4
Number of cylinders: 2
Power: 17KW at 8500 rpm
Starter: Electric
Fuel tank capacity: 12 litres
Maximum speed: 120 km/h
Suspension:
Front: Telescopic fork with integrated shock absorbers
Rear: Mono shock suspension system
Transmission:
5 gears
Drive covering: Open
Water level depth indicator, battery powered (3 x 1.5 V, included and easily replaceable), for use in boreholes to a maximum depth of 100 metres.
A stainless-steel probe is securely fastened to the free end of the cable and the cable with probe is attached to a cable winding reel. Measurements are taken by slowly lowering the cable with probe down the borehole until the probe comes in contact with the water.
The water level indicator consists of a flat, two cores, heavy duty cable calibrated in metres and centimetres on one side.
The unit is also equipped with an optical (light) signal that switches on upon contact of the probe with water. On contact with the water, the unit emits a high frequency audible signal, and the user can then take a depth reading from the calibrated cable.
-lab-183223402.jpg "RING SPANNERS (ELLIPTICAL PATTERN MIRROR FINISH WITH SLEEVE)")
Drop forged from high quality Chrome Vanadium Steel
Induction Heat treated.
