Jacketed Vessel Heat Exchanger
....
New Energy Pure Electric Powertain Disassembly and Assembly Training Platform
....
Workshop Pug for Bevelling
....
Laboratory Filtration Pump
....
Chemistry Data Collection and Graphing Set
....
Data Collection Platform
....
These are all original industrial parts that have been prepared such that individual active parts are clearly visible to the user, but their mechanical functionality is retained in full. The range consists of a series of different cutaway models of drive system components. Each of the cutaway models is firmly mounted on a base plate to which hand grips are also attached for carrying. Drive is by hand in each case.
Features:
Demonstration of machine components and illustration of their operation.
The active element consists of a non-metallic circular cylinder coated with an electrically conductive surface and circumferential contacts at each end. Under the conducting surface is a thermocouple designed to measure the local temperature. The Local Heat Transfer Element includes a black plastic plate with circular access hole designed to fit the aperture in the Cross Flow Heat Exchanger duct. The active element has a circular graduated flange that fits in the access hole and allows the active element to be rotated about its central axis while in the airstream.
Experimental Capabilities:
Determination of the local heat transfer coefficient at the stagnation point on a cylinder in crossflow
Investigation of polar heat transfer coefficient for a single tube in a transversely flowing airstream at speeds of up to 30m/s.
The Solid Liquid Extraction allows a soluble component of a solid mixture to be extractedwith a revolving extractor. In continuous 3-stage mode, pure solvent isdelivered from a tank to the sprinkler of the first extraction stage where itis distributed over the solid mixture. The extraction material and thesolvent move in counter flow. The extraction residue drops into a tank afterone revolution of the extractor. Valves can be used to switch to 1- or 2-stagecontinuous mode. After passing through the last stage, the extract collected in theextract tank. The extraction material is continuously fed into the cells of therotating extractor by a spiral conveyor. The solvent seeps through the extractionmaterial, absorbs its soluble components and passes into the collectingsegments. From there, the enriched solvent is delivered to the sprinkler of thenext stage. Discontinuous mode is possible with the extractor stopped.
Features:
Regenerable extraction material
Discontinuousand continuous solid-liquid extraction
1-, 2- or3-stage modes possible.
A range of manometers measuring differential water pressures up to approximately 12.5m H2O. Scales are graduated in 1mm divisions.
1 meter scale differential pressurized water manometer (the air space above the tubes can be pressurized with the pump supplied)
1 meter scale differential open water manometer
1 meter scale differential water over Mercury manometer
500mm scale differential kerosene over water manometer
500mm scale differential water over Mercury manometer
The Fault Troubleshooting System Motor Control Troubleshooting Module consists of FaultPro software, PC-based fault control card, and fault module with a wide array of faults and individual plug-in connection cables, power supplies, and operation manual. Fault Pro software is a Windows-based software package that provides an online interface for student troubleshooting and a database for record keeping of student responses.
The Fault Troubleshooting System is unique because it can insert faults into electrical lines that carry full power to electric motors as well as control-level signals. This gives it the ability to create a more realistic troubleshooting environment for students. Fault Troubleshooting System Motor Control Troubleshooting Module adds to the model Motor Control Learning System to provide troubleshooting training via computer-based fault insertion. The Motor Control Troubleshooting Module also avoids damage to the equipment that is normally associated with manual fault insertion because it inserts the faults electronically. The Fault Troubleshooting System module gives teachers the ability to accomplish this in an effective manner because it can automatically insert a wide array of faults throughout the training system and record student responses in a computer database. Training equipment last longer and troubleshooting is safer for both the student and the teacher. Troubleshooting is one of the most important skills a student can learn. To do so requires intensive practice in a realistic setting and teacher analysis of each student's methods. With this system, the teacher can work freely in the classroom, analyzing each student's results and coaching them while other students are performing their troubleshooting exercises.
Features:
Insert faults into electrical lines that carry full power to electric motors
Provide troubleshooting training via computer-based fault insertion
Automatically records student responses into a database for easy scoring.
IC Straightener
IC Puller
PLCC Extractor
DIP IC Extractor.
The equipment is constructed with a stainless steel frame, vessel and components. All devices, components and instrumentation are included. The unit is floor mounted on castors to allow for easy movement around the laboratory.
Drain valve
Capacity of 80 litres.
Training engine is a great educational tool that allows students to learn the structure of the engine and its components, power supply system, cooling system, engine control system. It also allows to study components and operation modes of the engine control system, perform various measurements, tests and other diagnostic procedures. Educational Engine Model With Petrol Injection System Motronic training engine with multipoint petrol injection (MPI) system MOTRONIC is specially designed to demonstrate the engine management system and operational structure. Self contained, fully operational engine installed in a mobile frame.
The main characteristics and functions of the Educational Engine Model With Petrol Injection System Motronic trainer are:
Engine with external components is clearly visible after removing safety panels. Easy access to the engine and its components for service and maintenance.
Integrated engine emergency stop button.
Possibility to measure the exhaust gas before and after the catalytic converter.
Possibility to simulate more than 20 faults by disconnecting banana plug jumpers.
Supplied with safety removable panels to protect against hot and rotating parts.
Electric wiring diagram with built in banana plug jumpers for measurements and simulation of system fault codes
Educational functional engine model with fuel supply system, instrument cluster, cooling system, power supply system and the exhaust system.
Instrument cluster, measurement and fault simulation panel integrated in a closed aluminium frame construction.
The Educational Engine Model With Petrol Injection System Motronic trainer has the following diagnostic and measurement features:
Diagnosis through OBD 16 pin diagnostic connector
Electronic control unit (ECU) identification
Control unit diagnosis
Control unit encoding/configuration
Reading/erasing fault codes
Actuator test (depending on the control unit)
Displaying the operating system parameters (live data)
Throttle adaptation.
Hydraulic systems are very common in drive engineering. The set enables the trainee to study both hydraulics and electric systems. Components Set Electrohydraulics enables to set up various electrically controlled drives. These drives are often electrically controlled. Therefore, hydraulics and Electrohydraulics are very important for vocational training.
....
Column working length is 1.4m x 80mm diameter, split into two sections.
An apparatus for teaching the principles of the absorption of gas into liquid, using a packed column.
Water flow can be used in either recycle or one-pass operation.
Column supplied with 10mm x 10mm Raschig rings as packing material, total volume 7 liters.
Two electronic pressure sensors measure the pressure drop across each half of the column.
An electronically controlled submersible pump provides a liquid flow of 1-10 l/min.
60l feed tank.
Electronic measurement of CO2 concentration in the air streams, measurements can be taken at the column inlet and outlet.
Sensor values displayed on an alpha-numeric display on the control console.
Centrifugal fan provides air flow up to 160 l/min.
Two electronic temperature sensors measure the air and liquid temperatures.
Cooling plant at teaching and industrial level, with modular design, and computer controlled.
Plant with ice store, wet cooling tower and dry cooler.
Main metallic elements in stainless steel.
Diagram in the front panel.
The different units (modules) connected with hoses.
Anodized aluminium structures and panels in painted steel.
Wet cooling tower.
Dry cooler.
Using valves different operating modes can be configured.
Refrigeration circuit (condenser, evaporator, compressor) and pumps.
Manometers.
Temperature sensors.
Flow sensors.
Ice tank.
Liquid tank.
Wattmeter.
Refrigerant R134a.
Connecting hoses.
High pressure control.
Pressure sensors.
Adjustment elements.
The Floor Standing Belt Conveyor Learning System adds to the Mechanical Drives 1 Learning System to teach skills related to flat belt conveyors. This system uses industrial quality components to help students become better prepared for what they will encounter on the job and to withstand frequent student use. The model Floor Standing Belt Conveyor includes an operational floor-standing flat belt conveyor; student learning materials for both theory and lab, and teachers guide. Students will learn industry-relevant skills related to this new topic including operation, installation, alignment, maintenance, and troubleshooting. Flat belt conveyors are used in almost every industry to transport material and packages at low cost from one point to another.
Features:
Industry-relevant skills
Teaches skills related to flat belt conveyors.
