Anti-B blood grouping reagent
Volume: vial of 10ml
Dropper bottle
Box of 10 vials
Contains monoclonal murine IgM antibody.
Set of winter clothing for baby aged 12 months.
....
Foster Walk-in type cold room, mono block, 30m3 for storage of vaccines at national and sub-national levels.
Internal dimensions: L=3690 x W=3690 x H=2100 mm
External dimensions: L=3890 x W=3890 x H=2300 mm
Gros volume-Freezer: 300 L
Volume category: >150L
Equipment operating voltage and frequency: 220-240 Volt 50Hz /60Hz, or 100-127 Volt 50Hz /60Hz, 1ph.
Energy consumption, stable running (kWh/24 hours): 3.54
Operating temperature: Max rated ambient temperature: +43°C
Refrigerant: R600a
Prequalified Mains Powered Vaccine/Water-Pack Freezer for storage of vaccines at -15?C to -25?C and freezing of water packs.
HF mobile station radio kit; radio w/handset, RF unit, junction box, power cables w/fuse, mobile antenna w/two whips, coaxial cable, control cable.
1.6-30MHz, 125W PEP, 400 channels, USB/LSB, AM, AFSK, scanning.
Data ready with additional cooling fans for interconnect with data modem
Standard 4/6-digit selective calling, emergency calling, GPS enabled, ALE/CALM, optional telephone interconnect.
Math teaching kit packed in a metal box.
Primary mathematics teaching aids kit designed for schools grade 1-6. It is mainly for teacher’s demonstration and can be used for student activities. Some consumables materials, such as paper, etc. are not included in the kit and those can be easily obtained locally. The primary mathematics kit consists of 23 items including instruction manuals and metal box.
Material: White gloss PVC, with permanent adhesive; 0.1mm thickness; lifespan 2-3 years from date of delivery; Kraft liner 130 grams
Colour: Background colour: cyan blue. The logo printed in white, positioned in the middle of the decal, running 80% of the length.
Decal, vehicle, permanently adhesive, 693 x 196 mm
Size: Rectangular, length 693 x 196 mm, with corners in a 90-degree angle.
Tape measure, retractable, for measuring sports grounds; length 5m (five metres), width 13mm; made of thin, plastic-coated metal, calibrated on one side with 1mm and 1cm lengths marked in black and 10cm lengths marked in red, for ease of reading. Stored wound-up in plastic case (assorted colours), 7 x 7cm; with locking mechanism and metal clip, for attachment to referee's clothing.
....
Material: Knitted polyester, at least 110 gsm; 4 eyelets (grommets), one in each corner.
Size: 100 x 150 cm.
The product is not permeated by water in the following situations: prolonged water exposure, heavy top-down watering, forceful water pressure applications, or submersion. Shell fabrics: 100% polyester, 1200 x 600 denier, tightly woven and spun to resist puncturing, triple PVC/rubber blend coating material.
Lateral fixations and Length adjuster
Carrying handle
Cyan piping tape for seams
Shoulder strap
Zips: Zinc alloy
Capacity of Bag: Suitable to carrying a weight of 15kg.
Base reinforcement: Supplied with a loose bottom plate of 1 mm PVC board, dimensions 600 x 230mm (tolerance of +/- 50mm).
A device designed to measure blood pressure consisting of an inflatable cuff that fits around a limb (arm or thigh), an inflation bulb for controlling the air pressure within the cuff, an aneroid manometer, and tubing. The manometer is hand held (portable); blood pressure measurement is taken in conjunction with a stethoscope. The aneroid manometer consists of a metal bellows, which expands as the pressure in the cuff increases, and a mechanical amplifier that transmits this expansion through a lever to an indicator needle, which rotates around a circular, calibrated scale.
....
Realistic flashback and realistic feel of puncture through artificial skin and vein injection sites. Easily replaceable skin and veins withstanding multiple needle sticks. Realistic simulation of intramuscular and subcutaneous injections with accurate landmarks. Life-size adult arm with realistic anatomical features. Venous access sites available in the antecubital fossa, alongside of forearm and on the dorsum of the hand.
Easily cleanable.
Can provide simulation of: tourniquet position, venepuncture, IV therapy, including by bolus, infusion therapy, blood collection with artificial blood and aseptic techniques.
Material: Polypropylene, autoclavable.
Capacity: approx. 475ml
Length: approx. 205mm
Width: approx. 95mm
Height: approx. 45mm.
Vital signs monitors are used to measure basic physiologic parameters and track the status of low-acuity patients (patients found in medical-surgical areas, emergency departments, and ambulatory care centres) so that clinicians can be informed of changes in a patient's condition.
Patient vital signs monitor, 6 parameters, suitable for adults, paediatric/infants and newborn patients.
Steam sterilization kills microbes effectively and is often viewed as the gold standard of healthcare sterilization methods. For sterilization of full solid, porous, hollow A and B, plastics, rubber, unwrapped, bagged, single or double wrapped. Not designed for sterilization of liquids, food stuffs or waste. Steam sterilizers use pressurized steam to generate moist heat to eliminate viable microbes from non-heat-sensitive medical devices, including heat-tolerant products used for surgical and general patient care.
The sterilizer is suitable for wrapped, unwrapped, solid and hollow items as well as porous loads such as drapes and gowns.
The unit fitted with a front-loading door.
The unit is provided with a minimum of three (3) internal shelves.
The unit has a standard program at 2.2 bar at a temperature of 134°C.
The unit has a standard program between 1.0 and 1.1 bar with a temperature between 118 – 121°C.
The internal chamber made from stainless steel 316Litre.
The internal chamber has a volume of 40 Litres or more.
Vacuum relief line should be filtered with ≤0.3 µm pore size to allow sterile air into chamber.
The unit is fitted with a safety lock on the front door, preventing the door to be opened when the unit is under pressure.
The unit provided with an internal water tank with a capacity of 4.2 litre or more.
The unit is designed and constructed in such a manner that it is able to withstand frequent disinfection with hospital-grade products.
The unit is able to function on a single-phased power grid.
The unit equipped with a steam generator.
The unit is designed in such a way that outer surfaces remain at safe temperatures when the unit is in operation.
Power requirements: 240 Volts - 50/60 Hz (A 110 Volt unit is not available).
DISPLAY FEATURES
The unit is fitted with a front panel providing information on the unit.
The display indicates:
The current internal temperature.
The current internal pressure.
The time until the programme is finished.
Any alerts or alarms.
The ongoing cycle.
ALARM AND SAFETY FEATURES
Alarms are audible as well as visual.
Alarms are available for/when:
Low water.
Door not closed.
Temperatures are about to reach limits of the equipment.
Pressures are about to reaching limits of the equipment.
Exceeding high temperature limit.
Failed cycles.
Power failure
The unit is provided with an over-pressure safety valve and an over-temperature safety system.
A notification that the end of sterilization cycle has been reached.
Pressure force instrument: towel clamp, springy.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15-0.20% carbon, 12-13% chromium.
One fine single tooth at each jaw.
Reusable.
Hard ratchet, lockable.
Length: 13 cm.
Fortified and cereal based dry compressed food, 9 bars per pack of 500g, 24 packs per carton. Each bars weighs minimum 55g.
....
Material: Polyethylene
Sachet, transparent, open along 1 short side with a ziplock, securely sealed along the 2 long sides and one short side. The ziplock must fit 210 x 148mm(A5) size health cards.
Dimensions: length of 220mm, width of 160mm and thickness of 0.08mm (80 microns).
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear grab strap (for speedy evacuation of injured/casualties).
Fitted with front, rear, and side pockets for insertion of hard ballistic plates.
Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state.
Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, backcoated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellancy. Black webbing to attach accessories.
Standard equipment:
Anti-theft device
Headlight, front
High air intake
Horn
Brake light
Cargo carrier, rear
Speedometer
Tail light
Sump guard
Tool kit, basic
Rear view mirror, 2 pcs
Side indicators, front & rear.
