The detachable transformer is equipped with 4 sets of induction voltages, 6V, 8V, 9V, 12V, 24V.
....
Made from high-quality 45 g/m2 SMS fabric
Detailed finishing, 3-pocket design and front snap closure
The High Performance Lab Coat, White Frost is premium protective apparel made from top-quality materials and designed to provide reliable barrier protection without sacrificing comfort or style.
Fluid-resistant fabric Level 2 standards
Each bag contains 10+2 units, for a total of 12 vs. 10 per package from the competition.
2 supports with clamp fixing, optionally as articulated support with measurement of angle of inclination or clamp fixing
Articulated support with force measurement dial gauge
Loads to subject the beam to point loads or moment
Loads to determine the clamping moments on the supports with clamp fixings
Device to generate a bending moment
Comparison of different methods to determine the elastic line
Statically determinate or indeterminate beam
Dial gauge with generation of moment to measure the angle of inclination
Dial gauge to record the deformations of the beam
Experimental setup in frame
Storage system to house the components.
The structure and function of the F-drive axle can be fully shown through its demonstration and operation. Transparent Drive Bridge educational equipment is a kind of teaching equipment designed for colleges, secondary vocational and technical schools.
....
Compression testing machine 2000 KN capacity motorized with Servo-Plus evolution control unit to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm.
....
Combinatory Logic allows the study of the following combinatory circuits:
Adders, subtractors, multipliers, code converters, multiplexers and demultiplexers. The board is composed of:
4 OR (2 input)
2 OR (3 input)
1 OR (4 input)
4 AND (2input)
4 NAND (4 input)
2 NAND TRIGGER (4 input)
4 NOR (2 input)
4 EX OR (2 input)
12 silicon diodes
8 resistances
6 inverters
2 NOR (4 input)
3 AND (3 input)
1 dual in line 16 pin socket
12 NAND (2 input)v
2 AOI (2 and 3 input)
Power supply: 5Vdc, 3W.
Cutaway models of refrigeration components
Filter/drier, L=127mm, d=52mm, 0,27kg
Ceiling fan air cooler, 440x430x130mm, 8,6kg
Thermostatic expansion valve, 79x32x65mm
Programmable Logic Controller 26 In/22 Out unit has technical and functional characteristics similar to the ones of the Programmable Logic Controller 26 In/22 Out, but it is composed of a CPU with 24 digital inputs, 2 analogue inputs and 22 relay outputs.
....
Strong Electromagnet
....
The working voltage of the instrument is AC 42V, and the inductive demonstration device is a handheld light bulb display.
....
2 dial gauges with bracket to record the horizontal and vertical deformation of the beam under load
Storage system to house the components
Experimental unit for general and unsymmetrical bending of straight beams
3 beams: i, l and u profiles
Clamping flange of beam can be clamped in the pillar free to rotate in any direction
Clamping flange with angle scale to indicate the angular position of the beam
Eccentricity of load application point adjustable.
The individual accessory modules are driven using a DC drive motor. The motor is connected to the controller. The rotational speed can be continuously and finely adjusted using a 10-turn potentiometer. The speed is regulated electronically and displayed digitally. Friction forces are measured using strain gauge transducers. The trainer enables different sliding and rolling friction cases to be investigated. The parameters of a tribological system can be assessed during this process. The drive module is the basis for experiments with a range of accessories. Snap-action fasteners for fixing the accessory modules to the frame simplify the rapid assembly and disassembly of the experiments. The unit consists of a sturdy frame made of anodised aluminium section. Rubber feet ensure that the table unit does not slip. The controller processes this data and displays it digitally.
....
This control concept allows the engine lubricating and cooling points to be supplied independently of engine load and engine speed absolutely and with asignificantly lower drive power particularly in the part-load range than wouldbe possible with a non-controlled pump. A newly developed vane-type oil pump with demand-driven quantity regulation and two map-controlled pressure stages is used in the new 6- and 8-cylinder V engines. The pump is easy to turn.
The followingare easy to recognise:
Cold-start protection valve
Valve formotor oil pump
Control piston
Adjustingring
Rotor withvane.
Use original car battery management control system, accomplishing dynamic monitoring of each single cell voltage, dynamic estimating of battery capacity, dynamic monitoring of battery temperature, dynamic displaying of all battery information, dynamic monitoring of the total loop current, dynamic alarming indication, charging real-time control etc.
Power supply main switch, BMS battery management control unit, BMS information display screen, emergency stop switch, Jog switch, 12V switching power supply, charging and discharging socket, power supply detection terminal etc. are installed on the trainer panel. The power control unit electrical signal can be directly detected on the panel, such as resistance, voltage, current and frequency etc.
The color circuit diagram and working principle diagram are printed on trainer panel, to help students to understand and analyze the working principle of the electric vehicle battery pack management system through circuit diagram and object
Trainer base adopts steel structure welding, with spray paint treatment and self-locking casters.
Centrifugal blower and PTC auxiliary heater are installed in the internal of the trainer for simulating of discharge load of battery pack during vehicle operation.
220V AC power, converts to 12V DC power supply by internal circuit transformer rectifier.
Compression testing machines motorized with control unit (semi-automatic model) to test cubes up to 200 mm side and cylinders up to dia. 250x500 mm.
....
This board is basically structured in two sections:
A hysteresis non linear simulation, dead band and threshold it includes a digital voltmeter. The board is supplied complete with a set of stackable, plug in cables of suitable lengths and colours and with a training manual.
A linear process simulation, with two summing amplifiers, three blocks with proportional, integral, derivative transfer functions, offset and drift generators.
Power supply: ± 15Vdc, 300mA
Extension with components from advanced experiments in refrigeration systems
Condensing unit, consisting of hermetic compressor, condenser, receiver, pressure switches and shut-off valves
Refrigeration chamber, condensing unit and power supply equipped with shock-proof lab jacks
Base unit for the refrigeration training system
Extension with components from basic experiments using simple refrigeration circuits
Insulated refrigeration chamber with integrated evaporator, electric defrost heater and condensate drip tray.
Simulation of the inputs through switches and externally through terminals. The programming software is also supplied to allow programming the PLC from the computer, if so preferred. Easy to be programmed from its own panel, without computer. It is composed (including the extension module) of 12 digital inputs and 8 relay outputs.
....
Intended use: inject fluids into, or withdraw fluids from, the body.
Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Blister packed.
Steady Effect Experiment Instrument
....
