The Power Window System Trainer Four Door Hyundai mounted on a plastic training board with the following features :
Electrical test points are included on the trainer for circuit diagnosis.
Trainer requires an external 12VDC power supply to operate.
Students can wire this circuit using supplied leads and included OEM wiring diagrams.
OEM components (window motors, switches, with OEM matching wire colors.
A lockable system fault box allowing instructors to insert from one to four faults for student diagnostic learning.
User manual included.
Educational Advantages:
Fault box with 4 faults.
Test points for diagnosis.
Power window motors.
Master and slave switches.
Set of 21 jumper leeds, 24 (60cm) (6 red, 1 black, 14 blue).
Power supply voltage: 220V ± 10%, 50Hz; Audio output power: 0.5W; output signal amplitude 0-4V; Tempo: 10-290 times / min.
....
Basic principles of open-channel flow
Experimental section with 10 evenly spaced threaded holes on the bottom for installing models or for Water level measurement using pressure
Side walls of the experimental section are made of tempered glass for excellent observation of the experiments
Experimental flume with experimental section, inlet and outlet element and closed water circuit
All surfaces in contact with water are made of corrosion-resistant materials
Flow-optimised inlet element for low-turbulence entry into the experimental section
Length of the experimental section 2,5m or 5m
Smoothly adjustable inclination of the experimental section
Models from all fields of hydraulic engineering available as accessories
Closed water circuit with water tank, pump, flow rate sensor and manual flow adjustment.
Faulted circuits are connected through standard banana jacks. The Intermittent Fault Box provides a means of faulting circuits in vehicles.
The following faults can be inserted:
a. Open
b. Short to Voltage
c. Short to Ground
d. Incorrect Resistance
Time between fault switch.
Hard and intermittent switch.
Fault duration switch.
Terminal block receptacles are provided for diagnostic test points. A 12V source is required to operate the trainer. The Coil On Plug Ignition System Trainer allows for the demonstration of a complete ignition system with distributor using real-world components.
Educational Advantages:
Ability to test and verify a basic ignition circuit without distributor
Ability to visualize the operation of a direct ignition system using coil-on-plug ignition technology
Includes wiring schematics.
Four operational faults can be inserted to promote student diagnostic troubleshooting competencies.
Included Components:
Electric motor driven crankshaft and/or camshaft sprockets
OBDII data link connector
Engine Control Module (ECM)
Crankshaft position (CKP) sensor and camshaft position (CMP) sensor
Fault box with 4 faults
Test points for diagnosis
Ignition coils
Spark plugs
The model can explain the camera imaging principles and basic methods of operation, contribute to students' understanding of the camera.
....
Heat-sealed seam is behind sleeves—minimizes chance of contamination passing through.
Full-length wraparound with open back tailored to eliminate excess material
Tear-away collar for quick and easy removal
Lightweight, single-layer, low-density polyethylene gown for clinical and laboratory settings
Powder blue with smooth matte finish.
Thumb loop on sleeve keeps cuffs under gloves, enhancing leak protection
Gowns are folded for quick shake-out and easy donning.
Measuring a vapour pressure curve for saturated vapour
Bourdon tube pressure gauge to indicate pressure
Digital temperature display
Boiler with insulating jacket
Temperature limiter and safety valve protect against overpressure in the system.
Instrument Panel System Trainer allows for instructor demonstration, student hands-on reinforcement and troubleshooting practice. The Instrument Panel System Trainer is designed to teach computer and network controlled automotive instrument panel system operation. Powered by a 12VDC automotive battery or a 12VDC/10AMP (minimum) power supply.
Features:
Intermittent and hard fault codes can be inserted using the built-in keypad, a single computer.
Ability to perform actual service manual test procedures.
Actual new vehicle components, connectors, and factory wire colors.
Provides an advanced level of instruction by duplicating actual on-vehicle troubleshooting procedures.
Includes internal power supply for fault activation.
Controlled by Body Control Module (BCM).
Compatible with Instructor Management Program (IMP).
Battery posts are protected against polarity reversal.
Operated as a stand-alone trainer, or connected to the Lighting System Trainer and the Power Door Lock Trainer to teach and demonstrate vehicle systems integration.
Courseware includes Instructor Guide, Student Manual, and Service Manual Information.
A consists of a clear Plexiglas sheet with components, wiring and socket test points attached. The Double Sided Automotive Lighting System Trainer utilizes the design feature which allows unlimited expansion capabilities.
Educational Advantages:
The trainer is designed to train four students at a time
Students can build a complete automotive lighting system
Features of Double Sided Automotive Lighting System Trainer
Each side lighting system responds to inserted faults with real world symptoms
Available single sided or double sided
Manual fault box with 10 faults for the following circuits:
a Headlights
b Hazard lights
c Back-up lights
d Stop lights
e Turn signals
f Ignition switch
g Dimmer switch.
Electronic Automatic Transmission Rebuild trainer presents the rebuilding and service of Electronic Transmissions.
Features:
Stand Includes Component Storage and Drain Pan
Powder-Coated Frame Mounted on Casters
Recycled Transmission
Rebuild Stand allows 360 Rotation of Transaxle
Service Manual Available.
The Audio System Trainer is mounted on a plastic training board with OEM components. It contains the following features:
A lockable system fault box allowing instructors to insert from one to four faults for student diagnostic learning.
Electrical test points allowing student circuit diagnosis.
Audio control unit.
Vehicle antenna.
Two speakers.
Educational Advantages:
Faults can be inserted into the circuit that create real-world symptoms and abnormal operation.
OEM components and color matching wiring are used.
Students must connect all components using included jumper wires to reinforce relationships between components and OEM wiring diagrams.
Pump shaft rotation: 900 rpm / min; Impeller diameter:100 mm; Distance:1m; Total weight: 3.5 KG.
....
One Bourdon tube pressure gauge each for positive and negative pressure
Basic experiments for measuring pressure with three different measuring instruments
Plastic syringe generates test pressures in the millibar range
U-tube and inclined tube manometer.
Protection from oils, chemicals, gritty, grimy work areas and abrasive situations
Rough edge
Heavy-weight PVC construction
Color: Aqua green.
One size fits all
Size: 89 × 122cm (35 × 48 in.).
Manual Transaxle Rebuild trainer presents the rebuilding and service of Manual Transaxles.
Features:
Rotating Rebuild Stand with Component Storage and Drain Pan
Recycled Transmission or Transaxle with Clutch
Service Manual Available.
For training purposes the cutaway uses manually controlled air pressure to apply and release the clutches and bands. The cutaway trainer demonstrates the internal operation of a automatic transaxle and permits the student to visualize and safely operate the system. This allows the cutaway transaxle to be easily shifted through all speeds.
Educational Advantages:
Gear changes can be made using regulated air pressure and provided controls
Driven by hand crank
Allows visualization of gear changes, planetary gear sets, clutches and bands.
Static-free — no clinging
Autoclavable and washable up to five times
Latex-free, fire retardant.
Made of soft three-layer SMS (Spunbond/Meltblown/Spunbond) fabrics.
Snap front, three pockets, knit cuffs and collar
Hip length
Fluid-resistant, breathable.
The consists of an inlet manifold that supplies water to four jets, which are equally spaced around the turbine runner. The unit incorporates a pressure sensor to measure the inlet condition of the water. This pressure can be accurately controlled using the software supplied with the service unit. The runner itself is mounted on a horizontal shaft with a clear acrylic splash guard to enable maximum visibility of the workings. Each of the jets can be individually controlled using ball valves.
....
Electronic Automatic Transaxle Rebuild trainer presents the rebuilding and service of Electronic Transaxles.
Features:
Rebuild Stand allows 360 Rotation of Transaxle
Powder-Coated Frame Mounted on Casters
Recycled Transaxle
Stand Includes Component Storage and Drain Pan
Service Manual Available.
