Gros volume-Freezer: 105 L
Volume category: <150L
Refrigerant: R600a, 58 grams
Energy consumption, stable running (kWh/24 hours): 2.24
Equipment operating voltage and frequency: 220-240 Volt 50Hz /60Hz, or 100-127 Volt 50Hz /60Hz, 1ph.
Operating temperature: Max rated ambient temperature: +43°C
PQS Prequalified Mains Powered Vaccine/Water-Pack Freezer for storage of vaccines at -15?C to -25?C and freezing of water packs.
Vaccine storage capacity: 36 L
Volume category: <60L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Refrigerant: R600a, 60 grams
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Cabinet Type: Upright
Capacity: 707L
Storage temperature: up to-86°C
Volume Category: ≥ 600 <900L
Power requirement: 220-240V/50Hz and upon request 110V/60Hz
Operating ambient temperature: +10°C to +32°C (Temperate zone)
Adjustable cabinet temperature set point -40°C to -86°C in 1°C increment., the temperature regulation accuracy is 0.1°C.
Data mode: Selective repeat ARQ Protocol, 2400 bps-16 channel QPSK modulation.
Transceiver Interface: 9600 baud RS232; TR.29 based AT port.
Primary Power: 13.5V DC nominal (250 mA max), 9-16V DC operating range.
Link establishment mode: Proprietary link establishment 80 baud CHIRP.
Temperature: 0°C to 55°C.
Data compression: In-built data compression.
Rate of data transfer: Up to 6000 pbs (compressed), Up to 1475 bps (uncompressed).
Size: 210mm W x 240mm D x 65mm H (including rear connectors).
Weight: 1,8kg.
Non-toxic, bright, assorted colors; packed in neutral film in easy separable blocks, over-packed in supplier's own packaging. Clay, modeling, box of minimum 6 - maximum 8 sticks with a total weight of 500g.
....
Decal, equipment, permanently adhesive
Roll of 50
Material: White gloss PVC with permanent adhesive, 0.1mm thickness, lifespan 2-3 years from date of delivery, Kraft liner 67 grams.
Base color: 100% Cyan blue. The logo are printed in white, and positioned in the middle of the decal, running 80% of the length.
Decal, rectangular, 205 x 105mm, roll of 50 decals
Size: Rectangular, length 205 mm x height 105 mm, with corners in a 90-degree angle.
Wooden figures for table play; includes figures of domestic and wild animals, people, trees, etc. Set of approximately 100 figures all contained in either box or bag for storage. Coloured, smooth wood with non-toxic finish. Minimum size 50mm (2"); firmly based for standing.
....
Referee's whistle, shatterproof plastic, food grade, assorted colours; with cord lanyard for hanging the whistle around the referee's neck.
....
Shell fabrics: 100% Polyester, 1200 x 600 denier, tightly woven and spun to resist puncturing, triple PVC/rubber blend coating material must measure 340 GSM when coated.
Lateral fixations and length adjuster: Cyan blue PE plastic.
Lining fabrics: Cyan taffeta: 100% polyester, 190denier.
Mesh lining: Black 100% polyester. 410x150mm
with elastic top and stitched to the base of the bag.
Cyan piping tape for seams: 100% polyester. Back and front seams of bag reinforced with piping.
Shoulder strap: Cyan blue: 100% polyester. 1200 mm x 40 mm shoulder strap with rubber pad reinforced with X stitching. Shoulder pad, Cyan blue 4mm rubber.
Zips: Zinc alloy. Zip pull 30mm.
Padding: 100% polyester, molitan/sponge rubber. The bag is padded on all 4 sides except the top.
Carrying Handle: 100% polyester. 30mm wide at the top of the bag. Handle reinforced with X stitching and padded Velcro closure.
Capacity of Bag: Suitable to carrying a weight of 10kg.
The aneroid manometer consists of a metal bellows, which expands as the pressure in the cuff increases, and a mechanical amplifier that transmits this expansion through a lever to an indicator needle, which rotates around a circular, calibrated scale. The manometer is handheld (portable); blood pressure measurement is taken in conjunction with a stethoscope. A device designed to measure blood pressure consisting of an inflatable cuff that fits around a limb (arm or thigh), an inflation bulb for controlling the air pressure within the cuff, an aneroid manometer, and tubing.
....
Epidural and spinal injection simulator to perform both lumbar puncture and epidural procedures.
Realistic tactile feedback, epidural space, dura, subarachnoid space with fluid supply system
Reliable palpable anatomical landmarks (iliac crests and spinous processes L3/L4 or L4/L5) for orientation of user to access points
Lower torso segment with multilayer lumbar puncture inserts
Can be positioned in both the upright and lateral decubitus positions for various training scenarios
Realistic tissue response including loss of resistance when entering the epidural space
Needle insertion possible between vertebrae to the epidural space for injection of local anaesthetic or access into the subarachnoid space to perform a ‘spinal tap’
Durable, easy to clean and maintain
For training in aseptic techniques at puncture site.
Basic container for soiled dressings during nursing and surgical care.
Smooth surface.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18 - 20% chromium, 8 - 10 % nickel.
Reusable.
Container, kidney shaped.
Capacity: approx. 800 to 850ml.
Thickness: approx. 0.75-0.85mm.
Length: approx. 240-260 mm.
Width: approx. 130-150mm.
Height: approx. 30-50mm.
Cylindrical container used to sterilise dressing materials (gauze compress or cotton etc.) in a steam sterilizer (autoclave), and to keep them as "sterile" dressing materials for medical activities (i.e. dressing, injection etc.)
Drum, sterilizer.
Air vents system to allow steam to circulate freely during the sterilisation cycle.
Lateral air vents system is preferable to top and bottom air vents.
Closing lid with a clip lock.
Material: Austenitic stainless steel, smooth surface.
External diameter: approx. 150 to 165 mm.
Height: approx. 100 to 120 mm.
Thickness: approx. 0.6 to 0.7 mm.
Carrying handle.
Austenitic stainless steel composition: approx. 8-10 % nickel, 18-20 % chromium.
Reusable.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.16 - 0.20 % carbon; 13 % chromium.
Blade shape: Oval, fenestrated.
Blade edge type: Blunt.
Uterine curette.
Shank type: Rigid.
Length: shaft 26 cm.
Width: spoon 8 mm.
Reusable
The abdominal contains thirty surgical instrument set can be used either for interventions in abdominal emergencies such as exploratory laparotomies, caesarean sections, etc., or common interventions, especially gynaecology. This kit contains the instruments only, no storage box.
....
Material: Textile strip: woven acetate taffeta.
Adhesive: Mixture of rubber, resins and lanolin. Traditionally incorporates zinc oxide.
Size selected: Medical adhesive tape, roll.
Medical adhesive tape, roll.
High cutaneous tolerance.
Must adhere strongly when applied to the skin, but can be removed without causing significant lesions.
Colour: White or flesh coloured.
Components: Aerated and / or perforated textile strip impregnated with adhesive.
Can be torn by hand.
Impermeable to water.
Non-stretch.
Length: 5m.
Width: 2 - 2.5cm.
Non-sterile.
Single use.
The liquid therapeutic diet is intended for stabilisation phase of treatment of children diagnosed with SAM. It is intended to stabilize the child’s metabolism and support rehydration. The specified quantity of powdered therapeutic milk is mixed with the specified quantity of water boiled and cooled down to not below 70?C to obtain a defined quantity of liquid therapeutic diet with an energy density of approximately 75 kcal/ 100ml.
It comes as powder packed in a canister to prepare a liquid therapeutic diet with an energy density of approximately 75kcal/100 ml. Therapeutic milk diet with added vegetable fat, carbohydrates, vitamins and minerals.
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear extraction grab strap (for speedy evacuation of injured/ casualties), detachable comfort lining. Fitted with front, rear, and side external pockets for insertion of hard ballistic plates.
Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state, includes clear plastic ID sleeve. Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, back coated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellency. Black webbing to attach accessories.
Standard equipment:
Anti-theft device
Brake light
Horn
Rear view mirror, 2 pieces
Cargo carrier, rear
Headlight, front
High air intake
Sump guard
Tail light
Side indicators, front and rear
Speedometer
Tool kit, basic.
Water sampling bag, polyethylene, sterile, self-stand-up bag type. The bag has a leak-proof closure with folding tap closing, 100ml and 4oz. Fill lines and a write-on strip.
Water Sampling bags, 100ml capacity, Sterile, Stand-up, easy and safe closing, without Thiosulphate tablets.
