The electric heater and thermocouples connect to sockets on the Heat Transfer Experiments Base Unit, which also supplies the cold water feed and drain for the heat sink Students turn on the cooling water flow and adjust the heater power until the experiment reaches equilibrium. This experiment has a solid brass disc with an electric heater at its centre and a circular cross section cooling tube around its circumference. At equally spaced radii on the disc, seven thermocouples measure the temperature as the heat conducts radially outwards from the heater. Insulation around the disc reduces heat loss by convection and radiation, so that the results should match the theory for simple radial conduction only. It mounts on a base plate with a clear schematic of the experiment layout.
....
Laser shaft alignment systems also avoid problems such as sagging indicators, reading resolution error, and reading parallax error. These components add to the Mechanical Drives 2 Learning System and either the Mechanical Drives 1 Learning System Full Bench or the Mechanical Drives 1 Learning System Short Bench. Laser Shaft Alignment Learning System covers the installation, operation, and applications of laser shaft alignment in a variety of industrial scenarios. Laser shaft alignment is the preferred method of shaft alignment among maintenance and plant engineering personnel due to its superior efficiency and accuracy over older methods like the dial indicator method or the straight edge and feeler gauge method. Learning systems are composed of heavy-duty components that provide learners with real-world equipment they recognize on the job and already understand how to use. The Laser Shaft Alignment Learning System includes a laser alignment system, two measuring units, two shaft v-brackets, two locking chains, and a motor mount horizontal adjustment assembly. These laser alignment principles and components will be used to study topics like rough alignment, laser shaft alignment installation, soft foot correction, and laser shaft alignment operation and analysis.
Features:
Precision machined adjustment base
Hand-held
Reflected laser
Microprocessor based control unit
Reflector and transducer detector
Industrial quality components
Digital readout
Graphical display
Simultaneously measures and indicates corrective action
Student Reference Guide.
The system is universal, industry-based, modular and flexible for further expansion.
Students can learn the entire process of production such as feeding, processing, etc.
Each station simplifies the training of operation and can be expanded sequentially step by step through building complex automated procedure.
The modular production system stations allow varying simulation of real production processes that exist in industry field. With 6-Stations modular production system, mechatronics training includes distributing, testing,processing, handling, assembly and storing stations that can be operated separately or integrally.
The Computerized Multipurpose Distillation Plant can be used to perform a wide range of tests on binary, continuous or batch distillation processes. A data acquisition and analysis system for Personal Computer, makes it possible to perform the measurements in automatic mode, to produce charts of the characteristics curves which can be displayed on screen or printed, to save the experimental data on the disk or print them out. Suitable options make it possible to process azeotropic mixtures, to carry out the distillation under vacuum or in steam current (stripping). Of modular design, the training set is very flexible and easy to use, and can be integrated at a later stage with one or more of the many options available. A manual of exercises completes the supply.
....
Simplicity and clearness are the fundamental requirements that permit the teacher and students to operate without having todeal first with complicated utilization procedures. The Air Conditioning And Climatization Study Unit has been developed for insertion in the most advanced educationalsubjects. The flow is pre-heated, then moisturized by steam diffusers it is cooled through the evaporator and sent to the final chamber. The working principle of the apparatus is the following an air flow generated by a centrifugal fan enters a tunnel passingthrough a fluid thread rectifier. Before this last stage it may be re-heated andmoisturized by water diffusers, to experiment on heating environments and to have the opportunity to vary as manyparameters as possible for a complete study on air conditioning. As the air passes through the tunnel it undergoes a series of treatments, until it arrives in thelast chamber, which represents the environment to be conditioned.
....
Parshall flumes constructed in GRP, supplied with measuring scales, spirit levels and calibration curves.
Broad crested weir constructed of durable glass reinforced plastic.
Triangular shaped broad crested Crump weir constructed of durable glass reinforced plastic.
Stilling well with depth gauge comprising hook and point gauge.
Thin plate weirs constructed of stainless steel and mounted on a painted weir plate carrier with a simple head scale attached.
WSC flumes constructed in GRP and fitted with depth measuring scale supplied wih calibration curve.
Lightweight portable channel section constructed of corrosion resistant material.
The Concrete Water Impermeability Tester Three Points apparatus is supplied complete with graduated burettes fixed on the front panel. Concrete Water Impermeability Tester Three Points apparatus is used to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette. The unit accepts concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm. A manometer checks constantly the applied water pressure. A known water pressure is applied on the specimens surface for a known time, as requested by Standard, using a suitable air compressor having at least 5 bar pressure.
....
Surfacing capacity: 455/18 610/24 254/10
Max.planing width: 455/18 610/24 254/10
Thicknessing capacity: 200/8 200/8 177/7
Length of surface table: 1550/61 1550/61 1140/45
Rebating capacity: 12.5/1/2 12.5/1/2 12.5/1/2
Length of thickness table: 760/30 915/36 610/24
Min.length of workpiece for thicknessing: 254/10 254/10 254/10
Feeding speed (feed per minute): 24 24 24
Cutter block diameter: 120/4.72 120/4.72 95/3.75
Cutter block speed (rpm): 4000 4000 4000
Up/down movement of cir.saw table: 75/3 75/3 75/3
Max.circular saw diameter: 300/12 300/12 300/12
Power required - hp/rpm: 5/1440 5/1440 2/1440
The Panel View Operator Learning System is designed for higher processors and includes a Panel View 1000 operator terminal, mounting panel, cable set, in-depth curriculum for both theory and lab, and teachers assessment guide.
Panel View Operator Learning System adds to the PLC Troubleshooting Learning System to teach Human-to-Machine Interface (HMI) using Panel View Operator Station and model PLCs. Learners will study industry-relevant skills including how to operate, interface, and program Panel View operator terminals.
HMI operator stations have become commonplace in modern industry because they eliminate wiring, enable operator functions to be modified in software, and provide the ability for the operator to monitor PLC operations data.
Features:
Designed for higher processors
Reliable, industry standard components and features
Teaches Human-to-Machine Interface (HMI)
Includes a Panel View 1000 operator terminal, mounting panel, and cable set
World-class curriculum that integrates knowledge and skill-building.
This equipment consists of high power drills fitted with long drill rods to allow the boring of the hole in the model. An electric hand-drilling machine drives the drilling rod and that is supported on a slide which is arranged at a guide way. Self Propulsion Test Ship models have to be supplied with models manufactured with holes to pass the propeller shaft and stern tube assembly. The guide way for the drilling machine is attached to a vertical slide so that the position in height of the drilling rod can be adjusted. Cussons can supply equipment to drill the holes in the stern tube at the time of manufacture. At the end of the guide way the drilling rod is supported by a bushing. Furthermore the inclination of the guide way with the drilling rod can be adjusted at the vertical slide.
....
This Trainer Is Composed As Follows:
Work bench complete with:
4 wheels (the 2 front wheels are lockable)
3 drawers with locking systems with key for storing components.
50mm (horizontally and vertically) for quick clamping of hydraulic components without using additional tools.
1 clipboard located on the side of the work bench.
Metal working panel fully plastic coated; panel dimensions:950 x 1050 mm. With 5 mm holes every.
The structure of the course is based on the long-established training concept. This a fully equipped training system with all necessary components and aids to conduct a comprehensive training course in the fundamentals of pneumatic and electro-pneumatic controls.
Features:
2 large-format metal assembly panels for fast, secure component mounting
Sturdy base construction, mobile, with drawer system for storage
Complete training system providing an experimental introduction to the fundamentals of pneumatics and electro-pneumatics with PLC.
The workstation is constructed of heavy-duty, welded steel. Industrial quality components are mounted and plumbed in a closed loop circuit to control the water flow between two tanks or the liquid level in one tank. The Level And Flow Process Control Learning System teaches two of the most common types of process control systems, flow and liquid level, and the basic concepts on which other systems are based. All components are connected to banana jacks on the control panel to allow students to measure signals and connect the devices in a wide variety of control configurations. Students will learn to calibrate, adjust, install, operate, and connect process control systems in industrial applications. The process control simulator includes a bench-top workstation, process control network, control panel, student learning materials for both theory and lab, and teachers guide.
This allows students to study a wide range of process control methods. The relay control includes manual input switches, control relays, solenoid valves, and float switches to perform automatic on/off liquid level control. Level And Flow Process Control Learning System offers 3 types of controllers: relay control, the standard, and two options: PID controller and PLC control. Manual valves are used to switch between the PID and on/off control methods. The PID controller option enables variable electronic control of either liquid level or flow and the PLC controller option enables both on/off and PID control of the system.
Features:
Interchangeable Components
Built-In Instrumentation
Industrial Standard Components
Student Reference Guide
Heavy Duty Welded Steel Workstation
Industrial Safety Devices
3 Types of Controller Options
PLC Interface
Multimedia Curriculum Available.
This kit consists of suitable accessories for determining emission rate, color and ph level, software program manual and light source. Its application can be noticed in various teaching laboratories, earth science center and chemistry labs. Transmissions Experiments Kit is used for suitable measurement of different attributes of transmission lines and their input impedance. This multipurpose training system is used for providing thorough knowledge on phase delay, standing waves, attenuation and frequency response. This kit is suitable for explaining theories associated with color measurement based transmission, atomic emission and so on. We are a prominent manufacturer and exporter of Transmissions Experiments Kit.
Features:
Easy to understand mechanism
Simple to use
Meticulously designed.
Reciprocating engines consist of a piston reciprocating in a cylinder and connected to a crank shaft by a connecting rod. This cover includes a switch, which allows automatically stops the drive motor if the cover is opened. The Computer Controlled Balance of Reciprocating Masses Unit is mounted on an anodized aluminum structure with panels of painted steel. It includes rubber elements to have a vibration isolation and a transparent protective cover protects students from the moving crankshaft and allows the visibility of the practical exercises and elements of the unit.
....
The Plastics Technology 2 Learning System includes a clamping system, extrusion die for use with blow molding, pneumatic blow system, starter mold for blow molding, extrusion die, interactive curriculum for both theory and lab, and a teachers assessment guide.
Plastics Technology 2 Learning System adds to the Plastics Technology 1 Learning System to teach plastics blow molding and extrusion. Extrusion is used for two dimensional shapes like pipe, tubing, etc. and can be used in combination with blow molding. Blow molding is a popular method for processing plastics, consuming about 10% of all plastics worldwide, due to its economic cost and low finishing requirements. x
Students will learn skills such as creating a plastics part using a blow molding operation, troubleshooting blow molds, designing a blow mold using CAD/CAM, creating a blow mold using a CNC machine, creating a plastics part using an extrusion operation, and testing an extrusion for uniform diameter.
Features:
Extrusion Operation and Troubleshooting
Written and Multimedia Style Cirriculum
Blow Mold Development
Blow Mold Operation and Troubleshooting.
Inlet and outlet air pressures, temperatures and air flow rate, turbine torque and speed are recorded by a combination of instrumentation on the Compressible Flow Range base unit and the optional module.
Experimental Reaction Turbine Module:- Inlet and outlet air temperatures are recorded allowing the temperature drop due to work output to be measured. A single stage, radial flow , two jet reaction turbine with a throttle valve and belt brake dynamometer.
The Heat Release apparatus measures time to ignition, mass loss and heat-release rate (option) of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter.
On the front panel, the following are mounted:
Load cell controller
Tare button
Temperature Controller
Control switches comprising four red on/off push-button switches, which operate by firm pressure and light up when activated:
Ignition switches on the spark-generator circuit housed in the test chamber base
Load cell switches on the Newport controller
Power switches on mains electricity to the unit
Cone switches on the Eurotherm controller. This, in turn, energises a solid state relay, which switches the power to the cone heater (5kW)
Features:
Special split shutter mechanism is designed to prevent heating of the sample before the test is started
Fire model manufactured from stainless steel for long life
Three control thermocouples for the cone heater to maintain accurate heat flux
Sample weight measurement is by a strain gauge load cell with quick electronic tare facility
Control unit contains switches for power, ignition, load cell and cone heater
Spark assembly is used in conjunction with the shutter mechanism. Microswitches are fitted to the spark arm and the shutter mechanism for safe operation
Load cell controller with a weight-ranging facility to improve performance to suit weight of sample 0-500g
Temperature controller for ramp and control of cone heater.
The Column Buckling equipment is used for studying strut buckling under load. Column Buckling is to be used with Universal Structural Frame or Universal Base Frame. A small lateral load is applied by means of a pulley and a weight hanger. A dial indicator measures the lateral deflection. The top frame has a loading screw which pushes a cylindrical strut support sliding in a bushing. Each strut has end conditions for knife edge or built in. The load reading is by an indicator. The bottom frame has a load cell and a cylindrical strut support in a socket.
....
This product includes a rod and a circular plate to show the principles and use of simple harmonic motion theory in bifilar and trifilar pendulums. Filar Pendulums fits to the sturdy Test Frame for study or demonstration. Two suspension plates fix to the top of the Test Frame to hold the bifilar and trifilar pendulums
This product is part of a range that explores free vibrations in simple one degree of freedom systems.
It introduces students to key scientific terms such as:
Radius of gyration
Parallel axis theorem
Axis of rotation
Simple harmonic motion (SHM) and period of oscillation
Mass moment of inertia.
Features:
Supplied with lecturer guide and student guide
Union directives
