Experimental Ability:
Single or multi-cylinder engines
Naturally aspirated or supercharged engines
Measure the air flow of the engine, hose, or leads
Air Compressors
Research and development.
The cooling water circuit is fitted with a flowmeter on the inlet and a flow control valve on the outlet side. Note that the unit must be arranged for contra flow - that is the exhaust gas and cooling water must flow through the heat exchanger in opposite directions. Exhaust Calorimeter comprises a multi-tube exhaust gas heat exchanger in which the exhaust gases pass through the tubes and the cooling water flows outside the tubes. An exhaust gas sampling point with shut off cock is provided. The instrumentation is sufficient to enable the heat content of the exhaust gases to be accurately determined. Temperature measuring points are provided for exhaust gas inlet and outlet, and cooling water inlet and outlet.
Features:
Can be utilised with a wide range of engines
Fully instrumented.
The unit consist of a storage tank and a pump to simulate a dam reservoir, a cross flow hydraulic turbine, a generator which is connected to the turbine by a V belt, a lamp load bank, a dynamometer, and measuring instrument. Mini Hydro Power Plant is a self contained bench top unit for studying the power generation by a hydraulic turbine.
....
The reactors use the saponification reaction between ethyl acetate and sodium hydroxide. This provides a well understood and safe reaction for the students to investigate the different reactor types.
This is a reactor system specially designed to perform batch enzyme reaction utilizing the glucose isomerisation reaction catalyze by glucose isomerase. The unit is used to demonstrate batch enzyme kinetics and enzyme characteristics.
The fourth reactor - stirred tank reactor in series - is mounted on a dedicated unit.
Developed a set of algorithms which link the degree of conversions of the reactants to the electrical conductivity of the product. In this way the progress of the reaction can be monitored in real time, without the inconvenience and innaccuracy of titration methods.
Features:
Real time reaction monitoring
Small bench top equipment
Safe and student friendly
Four different types of reactor
Data logging facility available
Cost effective - 3 reactors share same service unit.
Capacity (ml) D. (mm) H. (mm)
5 22 30
10 26 35
25 34 50
50 42 60
100 50 70
100 60 80
250 70 95
400 80 110
600 90 125
1000 105 145
2000 132 185
Bench top for investigations on motion, plastic and elastic impact, momentum, spring-mass oscillation and on friction System to consist of:
Inclinable track with stoppers at both sides
Friction block
Plunger carriage
Device for actuation of carriages and friction block
3 tension springs
Rolling carriage
3 sets of weights
Deflection pulley
Cord
Moveable stopper for track
3 buffers with rubber buffer heads for covering of permanent magnets
Additional weights for carriages including measuring tape: length: 2000mm, resolution: 1mm.
Brake Drum Friction Apparatus, Brake Drum Friction Apparatus Equipments, Brake Drum Friction Apparatus Tools, Brake Drum Friction Apparatus Tool Kits, Brake Drum Friction Apparatus Manufacturers, Brake Drum Friction Apparatus Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
Magnus Frame, Magnus Frame Equipments, Magnus Frame Tools, Magnus Frame Tool Kits, Magnus Frame Manufacturers, Magnus Frame Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
A workbench, complete with loads, motors and data acquisition systems. Approximate dimensions: 2000 mm x 800 mm x1700 mm (h).
An auxiliary table for PC, bench top instruments and equipment like oscilloscopes, multi meters, etc.
Measurement system for complete power parameters.
Mechanical and electrical data acquisition instruments.
Programmable Logic Controller(PLC).
2 Motors (conventional and high efficiency, 1.5 HP).
A control panel, with all the electric and electronic components arranged in an ergonomic way.
Load module
Motors driving systems: frequency inverter,soft starter, contactor.
Driving system and protection elements such as: circuit breakers, regulators, switches, keys, lights.
Experiments:
Heat transfer
Multi-variable control up to three variables can be monitored and individually controlled
ON/OFF control experiment includes investigation of over shoot and undershoot, Frequency response of model process
Thermal inertia and variable-time constants
The flexible design of the equipment allows the user to develop many other analysis and control exercises to suit their needs. It is good for extended or advanced control experiments, and is ideal for student project work.
ON and OFF time ratio, rates of heating and cooling, offset and hysteresis
Proportional, proportional + integral, or proportional + integral + differential control.
The Simple Pendulum oscillates on a knife-edge bracket attached to the wall at a convenient height.
The Simple Pendulum mass can be adjusted to any position along the pendulum cord length, quickly and easily. Set-up time is minimal for excellent results.
A Simple Pendulum consisting of a cord with a ring at the top end and a sliding pendulum mass.
A stopwatch and ruler are supplied to time the swing of the pendulum and to measure its length.
Experimental Capabilities:
To show that the periodic time of swing is proportional to the square root of the pendulum length
To determine the gravitational acceleration 'g'.
Scale factor: 1:1000
Three-phase model of an overhead power transmission line 360 km long, voltage 380 kV and current 1000 A.
T-slot-dimension 3 x 14 x 130mm
Distance from Floor to Table 840mm
Max. load on table 400kg
Capacity
X/Y/Z Axis Travel 650 x 400 x 500mm
Dist. from Spindle Axis to Column Guide Way 510mm
Dist. from Spindle Face to table top 120 - 620mm
Guide Way LM Guide Way - 25mm
Ball Screw Size & Pitch 32 Pitch:12mm
Spindle
Spindle Speed 40-8000 rpm
Spindle Power 5.5 / 7.5kw
Front Bearing Bore 60/95mm
Spindle Nose BT40
Accuracy
Positioning Uncertainty 0.005/300mm(JIS)
Repeat Positioning Accuracy 0.005/300mm(JIS)
Feed
Rapid Traverse (X, Y & Z) 30/30/24mm/min.
Cutting Feed 2-10000mm/min
ATC
ATC Type Disc
Number of Tools 16
Tool Dia. Max. 120mm
Tool Weight Max. 8 Kg.
Tool Length Max. 350mm
Min. Time of Tool Change 7 sec
The Solar Photovoltaic Troubleshooting Learning System includes all components needed to develop hands-on, job-ready skills: all solar specific components as well as balance of system items. The solar photovoltaic PV learning system contains a mobile workstation, component panels with breakers, combiner box, MPPT charge controller, lamps, batteries, meters, grid-connected inverter, a fault insertion system, PC-based multimedia student curriculum, and instructors assessment guide. The required two-panel array provides a complete solar PV troubleshooting experience.
Solar Photovoltaic Troubleshooting Learning System Installing and maintaining solar photovoltaic (PV) systems requires hands-on skills and troubleshooting ability across the types of PV systems commonly used such as AC, DC, and grid-connected. Budding engineers and designers need to understand the technologies used in these systems as well.
The Solar Photovoltaic Troubleshooting Learning System teaches students connection, operation, programming, and troubleshooting of AC/DC and grid-connected systems. Solar Photovoltaic Troubleshooting Learning System allows students to develop the specialized skills and knowledge needed for working with the common types of PV systems. The curriculum is highly interactive, PC-based multimedia that allows students to use the learning style best for them reading, listening, visual.
Features:
Balance of System Components Replicates Real World PV Systems
Computerized Fault Insertion
Grid-Connected and Micro Inverters
Modern Communications and Programming
Mobile, Multiple PV Panels.
Welding Technology Learning System consists of a workstation with a self-contained down-draft table and angle grinder, storage station, gas metal arc welder, weld test fixture, tools and fixtures, safety gear, student curriculum and teachers assessment guide.
The Welding Technology Learning System teaches how to safely create an array of high quality weld types. Welding plays a critical role throughout our economy. It is central to many industries including manufacturing, construction, and aerospace to name only a few. Welding is a blend of both art and science, joined together to create enduring bonds that allow us to create structures and machines on a scale impossible to achieve without it. The Welding Technology Learning System is mobile with both the workstation and storage unit designed for classroom use.
Features:
Mobile Technology Workstation with Vise
Magnetic Stainless Steel Top Workstation
Turnkey Storage Station.
The Watertight Propeller Dynamometer of high capacity is sealed against pressure of up to 1 bar above atmospheric pressure and against relatively high vacuum (1 bar = 10 to the power 5 N/m2 = 0.1 MPa). Idle friction of the measuring shaft is small despite the use of sealing rings and is approximately 0.3 Nm for dynamometer and 0.4 Nm for dynamometer. The dynamometer can be used also for propulsion tests with relatively high torque and thrust values in ship models under water. That has slightly larger dimensions, but is of similar appearance. It is thus suitable for use in the measuring section of cavitation tunnels, as an inner drive dynamometer in ship models or in dummy bodies mounted in the measuring section of a cavitation tunnel.
....
Effect of rod length, rod material and J value on angle oft wist. The Torsion Experiment Kit enables studentsto understand the relationship between torsion and the angle of twist for anygiven material.
Features:
Appliedstudent Learning via Building and experimentation
Hands-onLearning
Multipleexperimental capabilities per self-contained kit
Clear andconcise pictorial assembly instructions enhance the learning experience
Tool-Lessassembly
Supplied witha detailed instruction manual, covering the theory of Torsion includingmultiple practical experiments designed to further develop the studentsunderstanding in this field.
The Piston Engine Cutaway Model can be operated with a hand crank to show the internal mechanism and working of an engine, which include spist on action and valve action. The Piston Engine Cutaway Model is a carefully machined cutaway of an aircraft piston engine. We also accept special requests for a specific make and model engines cutaway. Piston Engine Cutaway Model is a motorized version which is rotated by an electric motor to show the inside view of the operation of an engine. There are two models available Piston Engine Cutaway Model is a four-cylinder engine cutaway, and Piston Engine Cutaway Model is a six-cylinder engine cutaway.
....
Electrical Fundamentals 1:
Measuring Voltage and Current
Series and Parallel Circuits
Thermo couples
Photocells
Cells and Batteries
Ohms Law.
Electrical Fundamentals 2:
Series/Parallel Networks
Voltage and Current dividers
Resistors in Series and in Parallel
Power in DC Circuits
Kirchoffs Laws
Power Transfer.
Electrical Fundamentals 3:
Capacitors and Electrostatics
Generator Principals
Transformers and their Construction
Inductors and Inductance
DC Motors
Transformer Losses.
Electrical Fundamentals 4:
AC Measurements
Inductance and Capacitance
LR and CR Parallel AC Circuits
LCR Parallel AC Circuits
LR and CR Series AC Circuits
Low Pass and High Pass Filters
Band Pass and Band Stop Filters
LCR Series AC Circuits
Q Factor for Bandwidth.
Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and Digital Timer provided in our Impact of Jet Apparatus. Impact of Jet Apparatus consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.
Features:
Water Circulation Closed loop.
Powder Coated Painted structure
Simple to operate & maintain
Compact & stand-alone set up
MS Tanks with FRP Lining.
Experiments :
To investigate the forces produced by a water jet striking a flat or a curved surface.
