Material: White gloss PVC, with permanent adhesive; 0.1mm thickness; lifespan 2-3 years from date of delivery; Kraft liner 130 grams
Colour: Background colour: cyan blue. The logo printed in white, positioned in the middle of the decal, running 80% of the length.
Decal, vehicle, permanently adhesive, 693 x 196 mm
Size: Rectangular, length 693 x 196 mm, with corners in a 90-degree angle.
Beads, wood, not less than 35mm in diameter(+/-10%), with laces, box of 50 pieces, suitable for ages 3 to 6.
....
Tape measure, retractable, for measuring sports grounds; length 5m (five metres), width 13mm; made of thin, plastic-coated metal, calibrated on one side with 1mm and 1cm lengths marked in black and 10cm lengths marked in red, for ease of reading. Stored wound-up in plastic case (assorted colours), 7 x 7cm; with locking mechanism and metal clip, for attachment to referee's clothing.
....
Material: Knitted polyester, at least 110 gsm; 4 eyelets (grommets), one in each corner.
Size: 100 x 150 cm.
The product is not permeated by water in the following situations: prolonged water exposure, heavy top-down watering, forceful water pressure applications, or submersion. Shell fabrics: 100% polyester, 1200 x 600 denier, tightly woven and spun to resist puncturing, triple PVC/rubber blend coating material.
Lateral fixations and Length adjuster
Carrying handle
Cyan piping tape for seams
Shoulder strap
Zips: Zinc alloy
Capacity of Bag: Suitable to carrying a weight of 15kg.
Base reinforcement: Supplied with a loose bottom plate of 1 mm PVC board, dimensions 600 x 230mm (tolerance of +/- 50mm).
A device designed to measure blood pressure consisting of an inflatable cuff that fits around a limb (arm or thigh), an inflation bulb for controlling the air pressure within the cuff, an aneroid manometer, and tubing. The manometer is hand held (portable); blood pressure measurement is taken in conjunction with a stethoscope. The aneroid manometer consists of a metal bellows, which expands as the pressure in the cuff increases, and a mechanical amplifier that transmits this expansion through a lever to an indicator needle, which rotates around a circular, calibrated scale.
....
Realistic flashback and realistic feel of puncture through artificial skin and vein injection sites. Easily replaceable skin and veins withstanding multiple needle sticks. Realistic simulation of intramuscular and subcutaneous injections with accurate landmarks. Life-size adult arm with realistic anatomical features. Venous access sites available in the antecubital fossa, alongside of forearm and on the dorsum of the hand.
Easily cleanable.
Can provide simulation of: tourniquet position, venepuncture, IV therapy, including by bolus, infusion therapy, blood collection with artificial blood and aseptic techniques.
Material: Polypropylene, autoclavable.
Capacity: approx. 475ml
Length: approx. 205mm
Width: approx. 95mm
Height: approx. 45mm.
Vital signs monitors are used to measure basic physiologic parameters and track the status of low-acuity patients (patients found in medical-surgical areas, emergency departments, and ambulatory care centres) so that clinicians can be informed of changes in a patient's condition.
Patient vital signs monitor, 6 parameters, suitable for adults, paediatric/infants and newborn patients.
Steam sterilization kills microbes effectively and is often viewed as the gold standard of healthcare sterilization methods. For sterilization of full solid, porous, hollow A and B, plastics, rubber, unwrapped, bagged, single or double wrapped. Not designed for sterilization of liquids, food stuffs or waste. Steam sterilizers use pressurized steam to generate moist heat to eliminate viable microbes from non-heat-sensitive medical devices, including heat-tolerant products used for surgical and general patient care.
The sterilizer is suitable for wrapped, unwrapped, solid and hollow items as well as porous loads such as drapes and gowns.
The unit fitted with a front-loading door.
The unit is provided with a minimum of three (3) internal shelves.
The unit has a standard program at 2.2 bar at a temperature of 134°C.
The unit has a standard program between 1.0 and 1.1 bar with a temperature between 118 – 121°C.
The internal chamber made from stainless steel 316Litre.
The internal chamber has a volume of 40 Litres or more.
Vacuum relief line should be filtered with ≤0.3 µm pore size to allow sterile air into chamber.
The unit is fitted with a safety lock on the front door, preventing the door to be opened when the unit is under pressure.
The unit provided with an internal water tank with a capacity of 4.2 litre or more.
The unit is designed and constructed in such a manner that it is able to withstand frequent disinfection with hospital-grade products.
The unit is able to function on a single-phased power grid.
The unit equipped with a steam generator.
The unit is designed in such a way that outer surfaces remain at safe temperatures when the unit is in operation.
Power requirements: 240 Volts - 50/60 Hz (A 110 Volt unit is not available).
DISPLAY FEATURES
The unit is fitted with a front panel providing information on the unit.
The display indicates:
The current internal temperature.
The current internal pressure.
The time until the programme is finished.
Any alerts or alarms.
The ongoing cycle.
ALARM AND SAFETY FEATURES
Alarms are audible as well as visual.
Alarms are available for/when:
Low water.
Door not closed.
Temperatures are about to reach limits of the equipment.
Pressures are about to reaching limits of the equipment.
Exceeding high temperature limit.
Failed cycles.
Power failure
The unit is provided with an over-pressure safety valve and an over-temperature safety system.
A notification that the end of sterilization cycle has been reached.
Pressure force instrument: towel clamp, springy.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15-0.20% carbon, 12-13% chromium.
One fine single tooth at each jaw.
Reusable.
Hard ratchet, lockable.
Length: 13 cm.
The Periphery Kits are designed for initial response at periphery level within an existing health structure with in-patients faculty such as Cholera Treatment Unit (CTU) or a Health Center (HC).
....
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Oro-pharyngeal airway, Guedel type.
Flange colour coded and/or marked with corresponding size number.
Size: Airway Guedel, size 4, approximately 90mm.
Initial sterilisation method:
Ethylene oxide gas or gamma radiation
Semi-rigid, transparent.
Proximal (or buccal) end straight and reinforced.
Fortified and cereal based dry compressed food, 9 bars per pack of 500g, 24 packs per carton. Each bars weighs minimum 55g.
....
Material: Polyethylene
Sachet, transparent, open along 1 short side with a ziplock, securely sealed along the 2 long sides and one short side. The ziplock must fit 210 x 148mm(A5) size health cards.
Dimensions: length of 220mm, width of 160mm and thickness of 0.08mm (80 microns).
Digital programmable BTE (behind-the-ear) hearing aid for people with hearing loss. Designed to provide access to speech and aid in the perception of environmental sounds. This device is attached to the user’s ear through an earmold. Programmable behind-the-ear digital hearing aid. This electronic device amplifies and transmits sound for adults with moderate-to-profound hearing loss. It can be programmed to the user’s degree and type of hearing loss.
INTENDED USE
Designed to be worn behind-the-ear for people with a moderate-to-profound hearing loss.
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear grab strap (for speedy evacuation of injured/casualties).
Fitted with front, rear, and side pockets for insertion of hard ballistic plates.
Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state.
Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, backcoated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellancy. Black webbing to attach accessories.
Standard equipment:
Anti-theft device
Headlight, front
High air intake
Horn
Brake light
Cargo carrier, rear
Speedometer
Tail light
Sump guard
Tool kit, basic
Rear view mirror, 2 pcs
Side indicators, front & rear.
The frame is painted, made of tubular steel construction with plastic grip handles. A two wheeled sack-barrow of maximum capacity 200 kg.
The barrow is fitted with solid rubber wheels running on ball bearings, size 200 x 50 mm.
Barrow dimensions: width, 520 mm; toe plate, 350 x 200 mm; height, 1,070 mm.
Light weight Pocket Colorimeter.
It provides Liquid Crystal Digital Display and direct concentration read-out.
Battery operated using four (4) AAA alkaline batteries.
A hand-held filter photometer factory programmed with the calibration for a single parameter (Chlorine), using the DPD method.
Range of chlorine analysis: 0-2mg/litre chlorine.
(Free and total).
Reagents are needed for the tests.
Smallest increment 0.01mg/litre.
