Suitable when lighter aprons will do
Grommets and bib are electronically heat-sealed for added strength
Nylon ties secure apron at back
Available with nylon-serged finished edges.
Frame for mounting of experiments in statics, strength of materials and dynamics.
Stable on laboratory desktops or workbenches.
Frame supplied disassembled.
Sturdy sectional steel double frame, welded.
Easy, exact mounting of all components by precision clamp fixings.
Determination of the flow rate with the electromagnetic flow rate sensor
Water tank with sight glass
Digital display of flow rate, pressure and temperature
Investigation of an axial-flow pump
Powered by Universal Drive and Brake Unit
Closed water circuit.
Fully portable, suitable for classroom demonstrator and practical exercise in the workshop.
Self contained, fully operational Brake Rig, Cross diagonal hydraulic circuit.
The Brake Rig offers an enhanced training resource, hands-on training with real component sand greater understanding for the student without the constraints of the modern motor vehicle.
Indicator lamps fitted for handbrake and foot brake operation.
Complete with master cylinder and servo, disc / drum assembly hand brake and foot brake.
Optional indicator lamp for handbrake and foot brake.
It can fully display the composition and working process of the car starting system. The teaching board is based on car starting system.
Structure and composition:
Starter, battery, neutral switch, high quality color schematic panel, fault-setting and troubleshooting system, control panel, removable stand, supporting manual and experiment guide book.
Features:
It has the specialized troubleshooting and set areas. Faults can be set and removed manually.
The circuit diagram is printed on the panel which is easy for understanding.
It is based on the real car starting system.
The detection terminal is mounted on the teaching board, signals, such as resistance, voltage, current, frequency, etc can be measured.
The guards are both on front and back sides. Machines with block platens 3000kN and high stability with block platens 3000kN. Safety guards to CE Safety Directive, manufactured from highly resistant transparent polycarbonate material, complete with hinges and lock.
....
Main System Components: Evaporator, Absorber, Boiler With Bubble Pump, Condenser
Digital displays for temperature and power
Operation Of An Absorption Refrigeration System
Adjustable Electrical Heater At The Evaporator Serves As Cooling Load
Boiler Is Alternatively Heated By Electrical Heater Or Gas Burner
Ammonia-Water Solution As Working Medium, Hydrogen As Auxiliary Gas
Bubble Pump For Transportation In The Circuit
Piezoelectric Igniter For Gas Operation
Boiler To Separate Ammonia.
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in isolation units for infection prevention and control against viral penetration.
....
It is used to compose series circuit and parallel circuit, measure current intensity with ammeter, measure voltage with voltmeter, change current density with slide rheostat, measure resistance and power of bulb with voltmeter and ammeter and self-combination of experiment.
....
It is used to do water softening and water purification experiment in middle school chemistry teaching, and consists of water inlet, cation exchange column, soft water outlet medium, anion exchange column and pure water outlet.
....
Serged seams have multiple interlocking threads that are sewn around the raw edges of garment material to create a strong, stress-resistant seam
Elastic openings for tighter fit at wrist
Front zipper closure for easy donning and doffing
Raglan sleeve design for greater range of motion and comfort
Frock provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Bulk packaged in double transparent poly liners.
A-line silhouette
Bound neck for lower particle shedding
Greener Choice Claims
Environmental benefits include:
Recyclable.
Investigation of two statically determinate three-hinged arches.
Arch subjected to point load, distributed load each by weights or moving load.
Four sets of weights to compensate for the support reactions of an abutment hinge.
Hinged arch with three hinges: one crown hinge, two abutment hinges at the bearing points.
Three arch segments: 2x long (together making a symmetrical arch), 1x short (together with 1x long: unsymmetrical arch)
Experimental set-up in frame.
Storage system to house the components.
Water flow measurement at the inlet and outlet
Combined temperature/humidity measurement
Wet cooling tower with fan and pump for operation
Use of corrosion-resistant materials.
he ABS trainer offers an enhanced training resource, hands ontraining with real components, greater understanding for the student without he constraints of the modern motor vehicle. Fault panel to aid studentdiagnosis. Diagnostic socket fitted for the connections of fault code readersor blink coding. Pressure gauges show front and rear line pressures and individual pressure at each heel. Brake pedal kick-back can be observed. Self contained, fully operational ABS trainer, complete with ull braking circuit, manufactured using genuine car components. Simulation of wheel lock to activate ABS modulator. Speed simulation 0-160 km/h.
....
It shows the composition and working principle of the automobile airbag system. The teaching board uses new Passat airbag system components.
Structure and composition:
Airbag computer, crash sensors, fault setting and troubleshooting systems, large-capacity battery or 12V switch power supply, compressed air tank, left and right airbag, computer engraving circuit schematics panel, mobile stand, etc.
Features:
The panel is equipped with airbag component. It can fully display the structure of the airbag so that students can have good understanding of each component.
It has the troubleshooting areas and fault setting areas, multiple faults can be set.
The electrical signals of the airbag system, such as resistance, voltage, current, frequency, etc., can be directly measured.
Reading fault codes and clearing fault codes of the airbag control unit can be done by instrumentation.
The whole working process of collision sensors - Computers - spiral cable - the inflatable element - airbags detonated can be displayed when the sensor collision receive the collision signal by the indicator on the panel.
Designed to test concrete sewer and drain pipes used in drainage works, water and irrigation supply systems etc.
The machine is composed of two parts:
Steel Testing Frame.
Electro-Hydraulic loading and control cabinet.
Water-cooled four-cylinder petrol engine for setup of a test stand in conjunction with the load unit
Transfer of measured data via data cable from switch cabinet to CT 400 switch cabinet
Switch cabinet with warning lamps (oil pressure, alternator failure), operating time counter and ignition key
Force transmission to brake via rotationally elastic coupling and jointed shaft
Engine complete with fuel supply (tank, pump, hose) and cooling water circuit
Engine flexibly mounted on mobile frame with vibration-insulated base plate
Sensors for cooling water flow rate and temperatures (exhaust gas, cooling water, fuel, oil).
Reusable straight sleeveless protective apron, for use in healthcare settings.
Material: Opaque or translucent high quality plastic material.
Water and body fluids resistant, can be disinfected with chlorine solution (0.05% concentration).
Back fastening band and neckband should be strong and not detachable.
Moisture-proof and stain resistant.
Straight apron with bib, back fastening and neckband.
Reusable
Non-sterile
Size selected: Adult size.
Length: 120cm (+/-5cm) from top of the bib to lower edge of the apron, total length: 145cm (+/-5cm).
Width: 80cm (+/-10cm).
Thickness: 150-300 microns.
