Power Window System allows for instructor demonstration, student hands-on reinforcement and troubleshooting practice. Powered by a 12VDC automotive battery or a 12VDC/23A power supply (not included). The Power Window System is designed to teach computer and network controlled automotive power window operation. The Power Windows System is based on a CAN platform vehicle.
Features:
Provides an advanced level of instruction by duplicating actual on-vehicle troubleshooting procedures.
New vehicle components, connectors, and factory wire colors.
Ability to perform actual service manual test procedures.
Compatible with Instructor Management Program (IMP).
Courseware includes Instructor Guide, Student Manual, and Service Manual Information.
Intermittent and hard faults can be inserted using the Instructor
Battery posts are protected against polarity reversal.
Includes external power supply for uninterrupted fault operation.
Management Program (IMP) via a computer connected to the trainer.
Hard faults can be inserted by using the built in keypad on the Power Windows System Trainer.
The cutaway trainer demonstrates the internal operation of a 4WD drive train with manual transmission and allows visualization of gear changes, transfer case power flow, clutch function, differential function and limited slip differential function (clutch type).
Main Features:
Gear changes can be made using OEM shifter
Transfer case can be shifted electronically
Complete hydraulic clutch system with master/slave cylinders and clutch pedal.
Driven by 120VAC electric motor;
Allows visualization of gear changes, clutch function, transfer case power flow, differential function and limited slip differential function (clutch type).
Power consumption: 30VA,
Power supply: AC 220V±10% 50Hz±10%
Working Hours: 8 consecutive hours.
Constructed of heavyweight spunbonded polypropylene
100% latex-free
Designed to provide strength and fluid-resistance while offering breathability and comfort.
Synthetic elastic conforms to head for a personalized fit
24 in. diameter.
Flow Meter Demonstration Unit is a self-contained apparatus to demonstrate the attributes of flow meters utilized in measurement of water flow via pipes or open channels. Metering devices available in different combinations to suit coursework. Reference turbine flowmeter permanently fitted. Service module with reservoir, volumetric measuring tank & pump.
....
The SRS Air Bag Trainer allows students to understand the fundamentals of air bag systems as used in todays vehicles. Using the trainer, students will learn to recognize the main components, study various operation settings, and experiment with analytic and diagnostic methods using a diagnostic scan tool. Built with OEM components, the trainer functions in the same way as in the original vehicle with the difference that a light is used instead of the exploding airbag. A built-in lockable manual fault box is included.
Educational Advantages:
Ability to demonstrate complete SRS (Supplemental Restraint System) function in a classroom
Steering wheel can be safely removed and reinstalled during diagnosis or system testing
Full OEM diagnostic functionality supporting OBDII scan tool readout with OEM DTCs
Instrumentation demonstrating air bag deployment.
Equipment And Features:
Integrated SRS breakout box with test points for all terminals sized for standard meter leads
All OEM components, wiring, connectors and wire colors
OBDII data link connector
Manual fault box for SRS control module with 10 faults.
It is used to measure the power of the DC circuit.
....
Quick-release snap front closure
Two front pockets and one left breast pocket
Side seam openings for pants pocket access
These specialized lab coats offer excellent fluid resistance while maintaining their breathability.
Splash Resistant Polyester front and sleeves
Breathable Poly Cotton back panel for ventilation
100% polyester fluid-resistant front and sleeves
Industrial launderable
Can be used as part of an Compliance Plan.
The channel is equipped with a PVC inlet tank, and is developed for free discharge into the Hydraulics Bench. The is a compact open channel flume that is available in 2.5 m or 5.0 m lengths, with clean acrylic sides to the working part for complete visibility of the flow. The inlet tank includes a stilling arrangement to spread the water flow out before to entry into the channel for ensuring smooth uniform flow. Bed pressure tappings & fixing points for models are provided. A longitudinal scale set at the top of the channel allows depth gauges & Pitot-static tubes to be precisely located along the channel length. The level in the working part of the flume is controlled utilizing an overshot weir at the discharge end. The offered flume is mounted on a hard framework, and can be tilted by utilize of a calibrated screw jack that allows exact slope adjustment of the channel.
....
The cutaway trainer demonstrates the internal operation of a automatic transaxle and permits the student to visualize and safely operate the system. This allows the cutaway transaxle to be easily shifted through all speeds. For training purposes the cutaway uses manually controlled air pressure to apply and release the clutches and bands.
Educational Advantages:
Gear changes can be made using regulated air pressure and provided controls (requires shop air pressure)
Driven by hand crank
Allows visualization of gear changes, planetary gear sets, clutches and bands
It is maily used for the following experiments: The rectilinear propagation of light, pinhole, light reverse, refraction, convex imaging etc.
....
Quick-release snap front
Safety-sleeve cuff with tunneled elastic
Breast pocket with pencil slot
360° fire-resistant identification patches
2 oversized hip pockets
Vent openings on the sides allow access to pants pockets
Flame-Resistant Lab Coats are durable enough to withstand industrial laundering while maintaining fire-resistant properties that are guaranteed for the life of the garment.
Fire-resistant properties guaranteed for life of garment.
Spindle pump for pressure generation and fine adjustment.
Piston allows calibration over a wide range of pressures.
This unit allows pressure gauges to be accurately calibrated up to 300 bar, with an accuracy of +0.015%.
Priming pump.
A spirit level (or bubble level) and rotating foot studs are provided to enable the student to level the unit.
Laboratory calibration certificate.
Mineral oil is used as the hydraulic fluid.
Carrying cases for the unit and weights.
A set of weights, a set of adapters for the pressure gauges, spare seals and a bottle of oil are supplied.
For training purposes the transaxle is driven by hand crank and can be manually shifted through all speeds. The cutaway trainer demonstrates the internal operation of a Getrag 5-speed fully synchronized manual transaxle and permits the student to visualize and safely operate the transaxle.
Educational Advantages:
Allows visualization of gear changes
Enclosed in protective PETG cover
Driven by hand crank
Can be shifted manually.
It is maily used for demagnetize and magnetize magnetic objects in the lab of primary school.
Working voltage: 220v, Rated current:3A(magnetizing) 2A (demagnetizing).
Provides a durable reinforcement, but tears easily for quick application
For single use only.
Yellow adhesive tape attaches pieces of protective apparel ensemble, preventing gross liquid intrusion at interface points.
Seals gaps in protective apparel at sleeve, ankle, hood and storm flap.
These sources provide low or high flow rates that may be controlled by a valve at the discharge end of the test pipe. Head loss between two tapping points in the test pipe is measured using two manometers, a water over mercury* manometer for large pressure differentials and a pressurized water manometer for small pressure differentials.
The Energy Losses in Pipes accessory made up of a test pipe, orientated vertically on the side of the equipment, which may be fed directly from the Hydraulics Bench supply or, alternatively, from the internal constant head tank.
Water discharging from the head tank is returned to the sump tank of the Hydraulics Bench.
Features:
Feed either direct from hydraulics bench or from constant head tank.
Fast release fitting for easy connection to hydraulics bench.
Vertical test pipe with pressure tappings at entry and exit.
Water and mercury manometers supplied as standard.
The trainer has also been strategically sectioned and cutaway to allow students to visualize the internal engine and transmission components, and the variable timing and valve lift electronic control system. The Cutaway Engine And Transmission 1.8l Trainer has been specifically designed for demonstrating the operation of a 1.8L engine with transmission, shift lever and the iVTEC (Variable Valve Timing And Lift Electronic Control) system which is operated by regulated air pressure.
Advantages:
All OEM components
Functional iVTEC system operated by regulated air pressure
Driven by electric motor
Functional hydraulic clutch and shifter
Completely enclosed for safe observation.
Newtons Second Law Demonstration Instrument
....
Autoclavable and washable up to five times
Latex- free, fire retardant
Static-free — no clinging
Made of soft three-layer SMS (Spunbond/Meltblown/Spunbond) fabrics.
Hip length
Fluid- resistant, breathable
Snap front, three pockets, knit cuffs and collar.
