Solar Photovoltaic Trainer can operate either indoors or outdoors. Solar energy can be simulated by lights, which can be varied in intensity to show the student the electrical output variation. Solar Photovoltaic Trainer the advanced level program utilizes a new design, which allows more activities for the student in analyzing the effect of azimuth and zenith angles on the power output. The electric power is measured by an ammeter and voltmeter mounted on the chassis.
The trainer has two solar panels mounted on a swivel so that optimal sunlight can be captured and allows the students to measure the azimuth and zenith angles of incident. Also offers a similar model that is mounted on a flat classic series board. Solar Photovoltaic Trainer can operate in and out of the classroom and also comes equipped with a DC to AC inverter to apply outside loads.
With this board the students can study the operating principle of analog communication systems and analog signal processing techniques such as multiplication, division, square root, power, logarithm, antilogarithm, attenuation, amplitude modulation and demodulation, non inverting adder, difference amplifier, integrator and shunt. The design and construction of electronic circuits to solve practical problems is an essential technique in the fields of electronic engineering and computer engineering.
Theoretical Topics:
Characteristics and key specifications for fixed and step attenuators
Audio attenuators
Forms of amplitude modulation
Simultaneous multiplication and division
Analog computation of powers and roots
Familiarization with analogue computing technique
Basic and advanced linear operations
Amplitude modulation and demodulation methods
Square root operation
Attenuator overview
Log ratio computation
Antilog computation
Scale factor: 1:1000
Three-phase model of an overhead power transmission line 360 km long, voltage 380 kV and current 1000 A.
T-slot-dimension 3 x 14 x 130mm
Distance from Floor to Table 840mm
Max. load on table 400kg
Capacity
X/Y/Z Axis Travel 650 x 400 x 500mm
Dist. from Spindle Axis to Column Guide Way 510mm
Dist. from Spindle Face to table top 120 - 620mm
Guide Way LM Guide Way - 25mm
Ball Screw Size & Pitch 32 Pitch:12mm
Spindle
Spindle Speed 40-8000 rpm
Spindle Power 5.5 / 7.5kw
Front Bearing Bore 60/95mm
Spindle Nose BT40
Accuracy
Positioning Uncertainty 0.005/300mm(JIS)
Repeat Positioning Accuracy 0.005/300mm(JIS)
Feed
Rapid Traverse (X, Y & Z) 30/30/24mm/min.
Cutting Feed 2-10000mm/min
ATC
ATC Type Disc
Number of Tools 16
Tool Dia. Max. 120mm
Tool Weight Max. 8 Kg.
Tool Length Max. 350mm
Min. Time of Tool Change 7 sec
The Solar Photovoltaic Troubleshooting Learning System includes all components needed to develop hands-on, job-ready skills: all solar specific components as well as balance of system items. The solar photovoltaic PV learning system contains a mobile workstation, component panels with breakers, combiner box, MPPT charge controller, lamps, batteries, meters, grid-connected inverter, a fault insertion system, PC-based multimedia student curriculum, and instructors assessment guide. The required two-panel array provides a complete solar PV troubleshooting experience.
Solar Photovoltaic Troubleshooting Learning System Installing and maintaining solar photovoltaic (PV) systems requires hands-on skills and troubleshooting ability across the types of PV systems commonly used such as AC, DC, and grid-connected. Budding engineers and designers need to understand the technologies used in these systems as well.
The Solar Photovoltaic Troubleshooting Learning System teaches students connection, operation, programming, and troubleshooting of AC/DC and grid-connected systems. Solar Photovoltaic Troubleshooting Learning System allows students to develop the specialized skills and knowledge needed for working with the common types of PV systems. The curriculum is highly interactive, PC-based multimedia that allows students to use the learning style best for them reading, listening, visual.
Features:
Balance of System Components Replicates Real World PV Systems
Computerized Fault Insertion
Grid-Connected and Micro Inverters
Modern Communications and Programming
Mobile, Multiple PV Panels.
Welding Technology Learning System consists of a workstation with a self-contained down-draft table and angle grinder, storage station, gas metal arc welder, weld test fixture, tools and fixtures, safety gear, student curriculum and teachers assessment guide.
The Welding Technology Learning System teaches how to safely create an array of high quality weld types. Welding plays a critical role throughout our economy. It is central to many industries including manufacturing, construction, and aerospace to name only a few. Welding is a blend of both art and science, joined together to create enduring bonds that allow us to create structures and machines on a scale impossible to achieve without it. The Welding Technology Learning System is mobile with both the workstation and storage unit designed for classroom use.
Features:
Mobile Technology Workstation with Vise
Magnetic Stainless Steel Top Workstation
Turnkey Storage Station.
The oven is supplied complete with two grid shelves easily removable and that can be positioned at various heights pilot light, exhaust holes for fast cooling. Natural convection digital thermoregulator indicator. Designed for drying, baking, conditioning and moisture determination. Sturdy manufacture double walled with 60 mm thick glass fiber for thermal insulation. Exterior front part is stainless steel made; while interior chamber, grid shelves and external walls are made from zinc coated steel. The oven is equipped of a dual safety thermostat with higher thermic threshold to prevent accidental over-temperatures, and to ensure safe working conditions. Temperature from ambient to 200°C. is controlled by a digital thermoregulator-indicator.
....
The Water Conditioning Plant is very flexible and can be used for the treatment of water containing different kinds of pollutant substances. The quantity of pollutant substances can vary within the values that are normally shown in the industrial wastewaters. The instruments for pH and rH measurements, mounted on the unit, are fitted with analog output for the A/D conversion. The Water Conditioning Plant has been designed to perform practical experiments of water conditioning. The industrial wastewaters can be splitted in a first classification, into the ones containing organic products, determining a decrease of oxygen dissolved in the rivers where they flow and into wastes containing inorganic products whose toxicity is typical of the dissolved compounds. The realization of this equipment allows the treatment up to 170 liters of polluted water.
....
The Watertight Propeller Dynamometer of high capacity is sealed against pressure of up to 1 bar above atmospheric pressure and against relatively high vacuum (1 bar = 10 to the power 5 N/m2 = 0.1 MPa). Idle friction of the measuring shaft is small despite the use of sealing rings and is approximately 0.3 Nm for dynamometer and 0.4 Nm for dynamometer. The dynamometer can be used also for propulsion tests with relatively high torque and thrust values in ship models under water. That has slightly larger dimensions, but is of similar appearance. It is thus suitable for use in the measuring section of cavitation tunnels, as an inner drive dynamometer in ship models or in dummy bodies mounted in the measuring section of a cavitation tunnel.
....
Effect of rod length, rod material and J value on angle oft wist. The Torsion Experiment Kit enables studentsto understand the relationship between torsion and the angle of twist for anygiven material.
Features:
Appliedstudent Learning via Building and experimentation
Hands-onLearning
Multipleexperimental capabilities per self-contained kit
Clear andconcise pictorial assembly instructions enhance the learning experience
Tool-Lessassembly
Supplied witha detailed instruction manual, covering the theory of Torsion includingmultiple practical experiments designed to further develop the studentsunderstanding in this field.
The Piston Engine Cutaway Model can be operated with a hand crank to show the internal mechanism and working of an engine, which include spist on action and valve action. The Piston Engine Cutaway Model is a carefully machined cutaway of an aircraft piston engine. We also accept special requests for a specific make and model engines cutaway. Piston Engine Cutaway Model is a motorized version which is rotated by an electric motor to show the inside view of the operation of an engine. There are two models available Piston Engine Cutaway Model is a four-cylinder engine cutaway, and Piston Engine Cutaway Model is a six-cylinder engine cutaway.
....
Electrical Fundamentals 1:
Measuring Voltage and Current
Series and Parallel Circuits
Thermo couples
Photocells
Cells and Batteries
Ohms Law.
Electrical Fundamentals 2:
Series/Parallel Networks
Voltage and Current dividers
Resistors in Series and in Parallel
Power in DC Circuits
Kirchoffs Laws
Power Transfer.
Electrical Fundamentals 3:
Capacitors and Electrostatics
Generator Principals
Transformers and their Construction
Inductors and Inductance
DC Motors
Transformer Losses.
Electrical Fundamentals 4:
AC Measurements
Inductance and Capacitance
LR and CR Parallel AC Circuits
LCR Parallel AC Circuits
LR and CR Series AC Circuits
Low Pass and High Pass Filters
Band Pass and Band Stop Filters
LCR Series AC Circuits
Q Factor for Bandwidth.
The Aircraft specification describes how an avionics system transmits information over the unidirectional data bus to other system elements. The Trainer is complete and comprehensive equipment to prepare aircraft maintenance engineers and avionics engineers to understand and maintain modern aircraft. Aircraft specifications define the standard for transfer of digital data between avionics system elements. Aircraft standards are used on virtually all commercial aircraft.
The Aircraft data words define the units, ranges, resolutions, refresh rates, number of significant bits, padbits, etc. for the words transmitted by the different avionics system elements. Trainer simulates signals at two speeds. Words are 32 bits long including a label, parity bit and other fields. The software installed on the trainer is an intuitive, graphical data bus analyzer that simplifies the simulation of Aircraft based avionics systems. The use of this model does not require programming expertise, and trainees do not need to write software programs. All they need to do is consult the comprehensive training manual provided with the trainer, to understand the various menu options. The user-friendly MS Windows-based interfaces allow transmission and reception on data buses with just a few clicks of the mouse. Then, while the bus is running, data and bus activity can be observed in meaningful engineering units, and can be changed on the fly.
Hardware:
The hard ware utilizes a rack-mount PC, 17-inch LCD TFT monitor, ARINC 429 interface, laser printer, instructors panel, patch panel, and power supply unit. The equipment is installed in two 19-inch racks of 18U height.
Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and Digital Timer provided in our Impact of Jet Apparatus. Impact of Jet Apparatus consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.
Features:
Water Circulation Closed loop.
Powder Coated Painted structure
Simple to operate & maintain
Compact & stand-alone set up
MS Tanks with FRP Lining.
Experiments :
To investigate the forces produced by a water jet striking a flat or a curved surface.
Utilising the service unit the flow meters experiment rapidly mounts onto the multi functional work panel and is connected to the built-in water supply via quick connect couplings. Differential pressure reading is taken using a digital manometer against varying flow rates.
Combined with the Fluid Science Service Unit, the Fluid Science Flow Measurement Tray, provide shands on experimentation designed to demonstrate flow measurement and the relationship between velocity and pressure drop.
Thetray includes the following flow meters:
Orifice plate The use of anorifice plate to measure flow is demonstrated by measuring the pressure dropacross a defined orifice. The geometry of the orifice is in accordance with standard industrial orifice flow meters.
Venturi Meter : Used to demonstrate Bernoull is equation, showing how low pressure is generated in the throat of aventure tube, and how this is affected by flow. Thegeometry of the venturi orifice is in accordance with standard industrial venturi flow meters, so the use of a venturi to measure flow can also bedemonstrated. The flow recovery is also demonstrated by measuring the total pressure drop across the module.
Study of automatic control for a Brushless Motor.
Control and operation of a brushless motor in voltage
The student has the opportunity to learn to control and parameterize an automatic operation. The system allows the study of the operation of a Brushless Motor of a typical industrial process automation. The control and monitoring system can be done through a software that can:
Draw graphic curves
Set system parameters
Monitor real-time system (torque, speed, ...)
Synchronous Generator Drive Unit, Synchronous Generator Drive Unit Equipments, Synchronous Generator Drive Unit Tools, Synchronous Generator Drive Unit Tool Kits, Synchronous Generator Drive Unit Manufacturers, Synchronous Generator Drive Unit Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
FMS Mechatronics Training System, FMS Mechatronics Training System Equipments, FMS Mechatronics Training System Tools, FMS Mechatronics Training System Tool Kits, FMS Mechatronics Training System Manufacturers, FMS Mechatronics Training System Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
Refrigeration Training System, Refrigeration Training System Equipments, Refrigeration Training System Tools, Refrigeration Training System Tool Kits, Refrigeration Training System Manufacturers, Refrigeration Training System Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
Pipe Friction Apparatus, Pipe Friction Apparatus Equipments, Pipe Friction Apparatus Tools, Pipe Friction Apparatus Tool Kits, Pipe Friction Apparatus Manufacturers, Pipe Friction Apparatus Suppliers from India, China, Kenya
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Tunisia, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Gabon, Lesotho, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Mauritania, Eritrea, Gambia, Botswana, Namibia
....
