Experiment software supplied with the apparatus simulates an oscilloscope, allowing parameters such as phase angle, excitation frequency and displacement to be viewed. The experiment transducers are wired into the using front mounted BNC sockets. The parameters are fed into the system via the experiment sensors, i.e. proximity sensor, LVDT. Data Acquisition System is quick and easy to set up and connects to the host pc using a USB connection.
This unique and compact Data Acquisition System is an essential accessory for the Universal Vibrations Apparatus experiments. When connected to the relevant experiment and its sensors, the system allows measuring, capturing, storing and analysing of experiment data.
Basic Installation Training Package Unit may be thermally loaded for performance investigation and has a dial thermometer, Internally equalised Thermostatic Expansion Valve; High Pressure Switch; Low Pressure Switch; Liquid Line Filter Drier; Liquid-vapour Heat Exchanger; High Pressure gauge; Low pressure Compound gauge.
Basic Installation Training Package Unit consists of an air cooled condensing unit with high back pressure, high starting torque hermetic compressor, Complete with: Suction and Discharge Service Valves; Gauge Manifold Connections and Built in Motor Protector.
The evaporator is a finned coil type with fins a 5 fins per inch. Basic Installation Training Package Unit powder coated evaporator is a forced air, blow through type with removable front panel and galvanised sheet steel casing.
Suitable for Power Supply with variable voltage the braking systems and the excitation of the machines through manual or automatic operation.
Automatic regulation of excitation to keep a constant voltage
DC output: 0 to 210 V, 2 A
Power supply: 220 V, 50/60 Hz
The mechanics, dynamics and emissions are all under the control of the student. The data can be compared and trouble shooting procedures can be tested with ACTUAL results! Innovative designs makes the study of ALTERNATIVE fuels, biodiesel/LPG/CNG for heavy duty diesels a practical experience. Attached to dynamometers in the range of range, the training becomes a realistic experience.
....
Mechanical Drives Wind Technology course introduces mechanical systems and develops fundamental knowledge of mechanical systems and practices. Topics covered include learning how to select, install, adjust, troubleshoot, and repair a range of mechanical systems which are commonly found in both automated and manual machines used in every industry around the world. It will cover basic safety, installation, key fasteners, power transmission systems, spur gear drives, and multiple shaft drives.
Features:
Strong Depth and Breadth of Content
Text and Audio
Built for Self-Paced Learning
Engaging Interactions
Stunning 3D Animations.
Both balances serve mainly for measurements of forces acting on models which are either towed with the help of a towing carriage through a towing tank, or which are tested in a circulating water channel.
Both balances have the same general design but a different capacity as stated below. Pressure changes have practically no influence on the force measurements. The pressure surrounding the balance can vary between high vacuum and 1 bar above atmospheric pressure.
The relationship between SHM and gravity is evaluatedusing the Katers pendulum, as well as understanding SHM in a mass springsystem. The Simple Harmonic Motion Experiments Kit enablesstudents to understand the effect of mass and length of pendulum on SHM and theperiod of oscillation.
Features:
Harmonic Motionincluding multiple practical experiments designed to further develop thestudents understanding in this field
Appliedstudent learning via Building and experimentation
Clear andconcise pictorial assembly instructions enhance the learning experience
Multipleexperimental capabilities per self-contained kit
Supplied witha detailed instruction manual, covering the theory of Simple
Hands-onLearning
Tool-Less assembly.
Thrust Reverser System Trainer is a functional system that represents the systemsinstalled in turbine powered aircraft. The thrust reverser is pneumatically operated using the shop air above 50 psi The operation is controlled by a throttle. The can be used by the instructors todemonstrate the actual operation of a thrust reverser, besides allowing hands-on operation like component replacement.
....
The Anti skid Brake System Trainer includes standard hydraulic brake system plus the anti skid assemblies and components. The system is designed to meet or exceed the FAR requirements for instruction on aircraft anti-skid braking system. The Anti skid braking system is an essential part of a modern jet aircraft. There is a definite need for training aircraft maintenance technicians in this area. Our Trainer is an effective hands-on training system for anti skid braking system. Hands-on training is the only effective method of training to ensure that trainees not only understand the theory but they are also well prepared to maintain the anti skid braking system in the best possible manner.
....
This trainer is consists of three axes flight control computer, Mode Controller, Mode Annunciat or, Pitch / Yaw / Roll servos, Flight Director, and a magnetic slaved HSI System integrated with cockpit controls and includes control linkages to the control surfaces of a model aircraft.
The Autopilot/ Automatic Flight Controls Trainer is an excellent resource for teaching the principles of automatic flight controls by demonstration using a complete system that encompasses all the aspects of auto pilot and automatic flight controls. This is dedicated to bridging the gap between classroom instruction and practical,hands on training. This is representative of autopilot systems used on large commercial aircraft.
This is equipped with a complete control mechanism linked to a control yoke and rudder pedals. The visual display of realistic effects enhances the perception and understanding of flight controls. The trainer, in the standard configuration consists of a large model airplane with all the main control surfaces. Any movement in control yoke and rudder pedals results in the proportional movement of the control surfaces.
The Pressure Aging Vessel pressure aging vessel is used to simulate in-service oxidative aging of asphalt binder according to procedures developed by the Strategic Highway Research Program (SHRP). The Pressure Aging Vessel consists of a vertical, stainless steel pressure vessel in a stainless steel cabinet with encased band heaters, a precision sample holder for simultaneous testing of ten specimens, a set of ten TFOT specimen trays, a pressure controller, temperature controller, pressure and temperature measurement devices, temperature and pressure recorder, and a specimen loading and unloading tool. The offered product is manufactured and designed using the finest quality components with the help of contemporary technology. The offered product is delivered to our buyers only after its proper checking on different such as dimensional accuracy, performance, finish, etc.
The Pressure Aging Vessel features a compact, benchtop design with integral ASME code section VIII, division 1; 1992 A 93 pressure vessel controlled using a 7", full-color, touch-screen display, which is tilted for greater visibility. Operating pressure is 2.10 0.05 MPa (304psi). Temperature uniformity is ±0.5°C. Temperature is 80 to 115°C and programmable from 50 to 150°C. Between 80 to 115°C the tolerance is well within ±0.1°C.
Photoelastic analysis is achieved by passing light through the mechanical stress models while a tensile load is applied. The frame has the Transmitted Light Polariscope filter and quarter wave plate mounted to rotational frames. The Transmitted Light Polariscope is a bench top mounted frame which allows the study of stress patterns and photoelasticity resulting from geometrical changes in loaded mechanical models. Transmitted Light Polariscope can be vertically or horizontally mounted onto the light box. These frames allow the rotational angle of the plates and filters to be adjusted and hence vary the colourisation seen by the user. Rubber mounting feet enable it to sit firmly onto the light source. The frame can sits in front of a light box which supplies monochromatic or white light.
Experimental Capabilities:
Photoelastic analysis of standard mechanical models
Tensile loading of beams, perforated beams, plates, overlap element
Variation of stress colourisation
Rotational position of wave plate and filters
Analysis of Crane hook under tensile load.
Intended use:
To transfer liquids in general clinical laboratory applications.
Double-walled housing. Heating element, evaporator, storage tank, and condenser made of stainless steel
Distilled water to comply with the International Pharmacopoeia, free from pyrogen and have a conductivity of 2 μS/cm at 25oC
Automatic system with minimum production 2 L/h
Suitable for both bench and wall mounting
Operates from raw potable feed water, 3 - 7 bar, 4oC to 35oC
Built-in storage tank capacity approx. 4L minimum
Water saving through automatic water cut-off when storage tank is full
Thermostatic overheat protection
Mechanism to automatically restart the distiller when distilled water is withdrawn
Electronic contamination monitoring of the still with distillation stop and visual cleaning instruction
Thermostatic low water cut off protects the heating element
Solenoid valve to control the water supply
Power requirements 230V / 50-60Hz.
Used for multiple techniques to accurately dispense required volumes of liquid
Compatible with universal fit pipette tips ranging 100-1000µl
Autoclavable, and Resistant to UV sterilization
12-channel, adjustable pipetting volumes 50-1200µl
A handle with digital setting and read-out of delivered volumes
Manual air displacement micropipette
Built-in tips ejector
Sturdy and chemical resistant parts.
Serum collection for clinical laboratory tests.
Blood draw volume 3.5ml.
Material: clear nonfragile PET plastic and leak-proof rubber cap.
Plastic shielded rubber cap to protect personnel from direct contact with blood.
Blood collection vacuum tube.
Capped, with needle-pierceable vacuum seal cap.
Additive; Serum separation gel with clot activator.
Pen/Marker writable label space.
Standard color-coded cap.
Set of winter clothing for child aged 16 years.
....
Vaccine storage capacity: 7 litres
Cold box, Small, Long range
Cold life at 43°C without openings: 114.9 hours
With hinged lid and carrying handles.
Supplied with 14 x 0.6L icepacks as a standard.
Weight fully loaded: 23.3 Kg.
Vaccine storage capacity: 50 L
Volume category: <60L
Refrigerant: R134a, 315 grams
Energy consumption, stable running (kWh/24 hours): 0.77
Operating temperature: Min and Max rated ambient temperature: +10°C and +43°C
UIFPF- Grade A
Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Equipment operating voltage and frequency.
220-240 Volt, 50Hz/60Hz or 100-127 Volt 50Hz/60Hz, 1ph.
Vaccine storage capacity: 52.5 L
Volume category: <60L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
PQS prequalified Solar direct drive refrigerator with no battery for storage of vaccines at +2 ?C to+8?C in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Refrigerant: R600a, 70 grams
