It consists of support rod, single pulley, desk-side clamp, and small iron ring and nylon wire. It is used to prove that the standing pulley can’t save effort but can change direction; the movable pulley can save half of effort but can’t change direction of force. The height of support rod is adjustable.
....Sample cell for use with turbidimeters.
Includes lids
12 per pack.
Heavyweight fabric provides increased protection
Knit wrist prevents dirt and debris from entering the glove
Multi-purpose fabric gloves used for light protection in many general applications.
Clute cut.
Blended cotton/polyester fabric.
Wireless Pressure Sensor
....The pressure profile is indicated by the different heights reached by the lubricant in the tubes. The unit is intended for use with the basic module 13 measuring points that open out into measuring tubes are distributed around the periphery of the bearing shell. The unit enables the pressure distribution in a plain bearing with hydrodynamic lubrication to be displayed. Due to the radially adjustable bearing housing, the width of the gap can be adjusted in 1/100mm steps using a micrometer.
....This hydraulic maintenance training system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation. Hydraulic Maintenance Learning System teaches basic industrial skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. Hydraulic Maintenance Learning System includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. This improves both confidence and competency when performing industrial tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder. Uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms theyll use on-the-job.
Features:
Valuable skills include: installing hydraulic tubing using thread sealant and ferrule fitting; installing hydraulic hoses with a push-lock hose fitting; and installing adjustable and non-adjustable straight thread O-ring fittings.
Teaches skills related to servicing and maintaining hydraulic systems and components.
Includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit.
The Scraped Surface Heat Exchanger Series utilises the monocoque stainless steel cabinet with membrane technology control panel. The working platform can accommodate one, or two barrels (B) or a variable speed pinworker (P) alongside a product reservoir and progressive cavity feed pump.
An air incorporation system can also be added if required.
Small batch sizes enable rapid product testing and a Clean-In-Place (CIP) facility speeds turnround for increased productivity. All services required are housed inside the wash-down cabinet, which also contains a drawer mounted with the electrical chassis.
Maintenance an cooling access maintenance and cooling accessenlarge
The unit uses a refrigeration system supplied within the cabinet and utilises a chilled, recirculating brine system, which is pumped through the barrel jackets.
Features:
Integral membrane control panel enabling simple control and monitoring of all major variables
Enclosed self-contained, mobile, stainless steel service cabinet for easy cleaning and wash down
Full control of barrel speeds up to 1000rpm
Temperature control system incorporated
Hygienic design
Made from stainless steel
Hard chromed barrels
In cabinet refrigeration.
This dimensional metrology practice kit is designed for practical training in the metalworking trades. The test pieces used are stainless steel angle plates that have been manufactured with the accuracy of CNC parts. The kit includes ten angle pieces, all of which differ to a minor degree in dimensions and each of which is individually marked. The kit offers the advantage of being ready for use immediately; it contains everything required for the exercises. The trays are stackable, providing for space-saving storage. All parts are clearly laid out and well protected on a plastic tray.
....The unit is supplied with manuals which describe all parts of the unit, the installation and utilization procedures, as well as many exercises with experimental results. The Computerized Air Water Heat Transfer Apparatus allows to perform several experiments relevant to the thermal exchange phenomena connected to convection and conduction and some interesting experiments on fluid dynamics. Moreover, the transducers and the dedicated software allows the data acquisition of the main thermodynamics quantities and to obtain or as a table or as a graph, the acquired values and the thermodynamic calculated quantities. In particular, it is possible to study the thermal exchange between a gas (air) and a liquid (water) and the thermal exchange between an air flow rate in a forced motion and a wall at different temperature.
....This climate depends on different influences, such as the surface temperature of the evaporators, cold storage room temperature, degree of evaporator icing, quantity and type of refrigerated goods etc. Icing of the evaporators significantly reduces the refrigeration capacity and must therefore be prevented as much as possible by periodic defrosting, i.e. heating the evaporator surfaces. The climate in the cold storage room has a significant effect on the quality of the products stored there. The icing of the evaporators depends on the evaporator and room temperatures and the quantity of humidity introduced by the refrigerated goods. The evaporator surface can be heated from the outside by electric heating or from the inside by hot gas directly from the refrigerant compressor. In addition to the periodic defrosting at set times, there is defrosting performed as required by measuring the actual ice coating.
....The following can be seen:
Parking lock
All parts can be turned
The parking lock is functioning
Cable harness
Electric motor
Differential
Axle shafts.
Fast and safe adjustment of the press table height using a braked winch. Hand operated workshop press. Hard chrome piston and very long stroke of 300mm. Available from 40 to100 tons. Foot operated air approach feature.
Machine Features:
Fast and safe adjustment of the press table height using a braked winch
Movable cylinder
Foot operated air approach feature
Fast air return
Wide insertion width
Hard chrome piston and very long stroke of 300mm
The module is also provided with terminals for the power supply of the sub-modules. The development module includes 9 free slots on which electronic expansion sub-modules can be inserted. The connectors give access to the internal input and output points of the sub-modules. Each slot contains connectors in its upper as well as in its lower side.
....The Orientation-Processing station teaches interfacing, problem solving, programming, sequencing and operation for index tables, stepper motors, homing sensors, fiber optic sensors, part transfer, parts orientation, and capacitor sensors. The Orientation Processing Station is a small mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. The Orientation Processing Station is a mobile workstation with slotted work surface that contains an operator station, 8-station rotary index table, pick and place pneumatic robot, fiber optic gauging module, part transfer module, finished parts storage module, parts set, a pneumatic distribution module as well as an electrical distribution module, an electro-pneumatic valve manifold, and a digital I/O interface module. This station performs the role of parts orientation and an optional simulated machine operation in the process of assembling a working industrial directional control valve. Industrial safety and operation are emphasized on all mechatronic stations.
Features:
Inductive Sensors
Capacitive Sensors
Homing Sensors
Stepper Motors
Part Transfer
Parts Orientation
Index Tables.
Air flow generation by fan; adjustment by valve
Tanks for feed material and coarse material
Solid separation from gases with a cyclone
Metering of feed material into the air flow with a disperser
1 filter at air inlet and 1 filter for fine material at air outlet
Recording of differential pressure, volumetric air flow rate and temperature
Cyclone with tangential inlet.
This system contains bearings, flywheel and DC motor with variable speed. Easy to handle, this apparatus is preferred for its precise shape, easy to understand mechanism, application of latest technical knowledge, competitive price, low maintenance charge, sturdy construction and user friendly design. Whitworth Quick Return Mechanism is used for conversion of rotary motion into reciprocating movement at relatively slower rate than slider and crank. This apparatus is used to design equipments like mechanical actuator, screw press, shaper and power controlled saw.
Features:
Application specific design
Easy to handle
Simple to understand mechanism.
A rigid enclosure with acoustic lining may be placed over either noise source and attachments allow investigation of sound attenuation in ducts.
Each of two microphones may be connected to a DBA Filter and illuminated bar display to show relative loudness.
A self-contained unit for the demonstration of the methods of noise and vibration control. Variable control of both voltage sources allows speed control of both motors. An integral 240v electric motor and gearbox together with a 12v fan unit provide two noise sources.
Resilient mountings and mount bypass equipment allows investigation of modes of vibration at various frequencies and transmission of noise through solids.
The Equilibrium of Parallel Forces are produced with cords tensioned by weights on hangers, double pulleys being used to turn the upward forces downward. A Equilibrium of Parallel Forces board is clamped into the Universal Frame and Stand Two acrylic models engraved to simulate a 'Warren' and an 'N' truss are used for the application of vertical loads and reactions. The lines of action of the cords can be transferred onto a sheet of paper clipped to the force board. The set of weights needed for the experiment is included. A circular disc with twelve attachment points is used for the couples. To simplify the results each acrylic model has a counterbalancing weight to render each one 'weightless'.
Experimental Capabilities:
Special case where equal and opposite parallel forces produce a couple acting on a body
Equilibrium of opposing couples
Verify the conditions of equilibrium when sets of parallel forces act in one plane on a rigid body
Experimental verification of the use of a link polygon and is a test of M = 0 (where M = moments)
Fv = 0 (where F = forces and V = vertical).
The drive unit consists essentially of an oscillator and a power amplifier designed to provide a sine wave power output suitable for driving the vibration generator. Comprises a drive unit and vibration generator with experimental accessories.
Features:
Demonstration of Hookes Law applied to a spring
Demonstration of Simple Harmonic Motion of a free body
Vibration of a Double Cantilever Beam
Vibration of a Spring Mass System.
It is operated through the parking brake lever. Combination of Disk And Drum Brake Cutaway exposed brake pump, oil tank and brake lever and disk brake in which there is a drum brake.
....