Sterile suction catheter for single use.
Proximal end with cup connector, conical tip, allowing the tube to be connected to devices such as suction pump system.
Single channel tube.
Material: Polyvinyl chloride (PVC).
Size selected: Diameter CH16, length approximately 50cm
Open distal end, straight, with two side windows.
Sterile
Disposable
Initial sterilisation method: Ethylene oxide gas
Length expressed in cm.
Colour code/ external diameter: Visible on cup connector.
The product working voltage AC220V ,composed of a LED simulation screen, an acceleration knob and a deflection knob. Adjust the deflection knob, and the particles do the horizontal projectile motion. By adjusting the acceleration knob, the particles do uniform acceleration of linear motion.
....
It is used to observe ups and downs relationship of object in water.
Different quality with the same volume object, the same quality with different shape object, quality-changed object, shape-changed object, etc.
Monsoon Activity Demonstrator
....
Preservative used enhances stability
Biodegradable, safe and non-toxic
Pre-diluted
Do not include formazin
Ready and easy to use
Choose a glove with exceptional durability and added protection.
Extended Fully textured finish for a superior wet or dry grip
Ambidextrous and non-sterile with beaded cuff
cuff nitrile gloves are extra-thick, fully textured for a superior grip and are tested for use with chemotherapy drug exposure.
Powder free
Teal.
Tested for use with chemotherapy drug exposure
Length: 12 in. (30.5 cm)
Palm Thickness: 6 mil (0.15 mm)
Finger Thickness: 7 mil (0.18 mm)
Wireless Carbon Dioxide Gas Sensor
....
The industrially-standard items are clearly laid out, screw-fitted into an aluminium panel. The symbols on the panel show the correct graphical representation as well as the DIN and standard designations of the items concerned. This instructional kit is used for demonstration and information purposes. No provision is made for conducting exercises or experiments. The kit is clearly laid out on a plastic tray. The well-structured instructional material enhances the informational value of the kit.
....
The heat and light sources, instruments, filters and plates are mounted on an aluminium track with graduated scale, which is designed to stand on the benchtop and connect to the Heat Transfer Service Unit without the need for tools.
A heat source with radiometer and a light source with light meter are used where appropriate to demonstrate the principles.
A small-scale accessory designed to introduce students to the basic laws of radiant heat transfer and radiant heat exchange.
The light source consists of a 40 Watt light bulb (operating at 24V DC maximum) mounted inside a housing with a glass diffuser.
The heat source consists of a flat circular plate 100mm in diameter which incorporates a 216 Watt electric heating element (operating at at 24V DC maximum).
A comprehensive instruction manual is supplied.
The unit consists of four different types of pumps namely-centrifugal, turbine, reciprocating and axial flow pump, a common storage tank, and measuring instruments. Each pump is driven by a motor dynamometer for measuring TRUE pump input power. Multi Pump Test Set, Motor Dynamometer is a self contained set for studying the characteristics for various types of pumps. Speed control is by an inverter. The unit is floor standing with removeable supports. By manipulating flow control valves and a selector switch, each pump can be operated individually.
....
Pasteurising temperatures and holding times are easily adjusted, allowing the effectiveness of the product treatment to be investigated. When correctly operated, cleaned and sterilised can produce a correctly treated and pasteurised product. However it is not intended that this apparatus be used to manufacture products for human consumption. Although primarily designed for use with milk, other food liquids can be pasteurised providing that their solids content is not too high.
The Laboratory Pasteuriser accurately reproduces in miniature the industrial High Temperature Short Time process. Nominal throughput is only 10 litres/ hour.
The three stage plate heat exchanger of the achieves these parameters by
Transfers heat from the treated product to the feed liquid. Full instrumentation and controls are provided to regulate heating water temperature and also feed pump speed which in turn regulates holding time. This provides dual benefits in reducing the energy required to reach the pasteurising temperature and in reducing the cooling required. An optional Chilled Water Circulator is available.
Heating the process liquid with hot water prior to its entry into the holding tube and then by
Cooling with cold water to storage temperature. An intermediate heat exchanger.
Mahler Calorimeter For Determining Heat Of Combustion allows to measure the heat from combustion of several substances such as both liquid and solid hydrocarbon fuels with low and high volatility.
....
The transmissioncan be turned easily both from the drive and also from the output side. With the 5th generation of automatic transmissions, the following is achieved: high shifting comfort, light weight construction, fuel savings and increased driving enjoyment.
The following are visible:
All 7 hydraulic couplings
Range selector can be shifted
Solenoid valves and many small construction parts
Parking lock
Hydraulic control,
Converter with lock-up clutch
Ravigneaux planetary gear train and 2 simple planetary geartrains
Disk springs.
Basic Pneumatic Training Device is designed and made based on Pneumatic transmission, Pneumatic control technology. Students can get more accurate understanding of the structure of pneumatic components, pneumatic control loop theory and design methods through operation. It can be used as the comprehensive test-bench of the mechanical, electrical and pneumatic transmission.
Features:
Air pressure is low, electrical control uses low voltage 24V DC; training pneumatic control circuit is safe and reliable, with manual, automatic, sequential and other functions.
Training control unit can also use independent relay control unit to control electrical.
The training bench panel uses aluminum profile, the components can be installed onto the panel very conveniently.
Experimental device consists of training tables and training units, pneumatic and electrical control devices and other components.
Equipped with pneumatic components, and are equipped with transition plate for easy and optionally placing the components in the experimental panel, circuit lap using quick-change connectors to facilitate convenient and quick disconnect.
Yeld per mixture lt. 80
Motor power 1,8 KW
Cylinder dimensions (dia x h) 70x43 cm
Cylinder capacity lt. 150
The kit consists of a module with power supply, with different interfaces and a set of software application. This 32 bit Microprocessor Trainer can make students understanding and becoming familiar with the programming of the microprocessor and its components.
Technical Features:
General inputs and outputs with at least 64 ports
At least 8 Interrupt inputs
Onboard 256 MB Nand Flash
Onboard 64MB SDRAM and 2MB Nor Flash
Keyboard with hexadecimal keys
Expansion bus for connecting external applications
Development kit
7 segments display
10 bit AD converter and 8 bit DA converter.
The electrical components for the start and operation of a refrigerant compressor are clearly visibly arranged in a transparent showcase and already wired. The capacitor and start-up relay required for the motor are examined. Identifying electrical faults in refrigeration systems requires comprehensive knowledge this knowledge includes the design and operation of the individual electrical components as well as the reading of circuit diagrams. It helps to acquire this knowledge. The simulation of 15 different faults, e.g. coil fracture in the motor, short circuit in the operating capacitor or welded contacts in the start-up relay, is possible. Typical protection devices, such as circuit breaker and automatic fuse, are also arranged clearly visible.
....
The Torque Assembly Station teaches interfacing, problem solving, programming, sequencing and operation for an automated Torque Assembly Station, electric traverse slide, DC motor torque, variable speed motors and clutches. This station assures that the assembly components are properly tightened in the process of assembling a working industrial directional control valve. Torque Assembly Station is mobile training station 6 of the Mechatronics Learning System. The Torque Assembly Station is a mobile workstation with slotted work surface that contains an operator station, screw torque module, part clamp module, electric traverse module, a pneumatic distribution module as well as an electrical distribution module, an electro-pneumatic valve manifold, and a digital I/O interface module. The Torque Assembly Station is a small mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other training work stations. Industrial safety and operation are emphasized on all mechatronic stations.
Features:
Electric Traverse Slide
Inductive Sensor
Variable Speed Motors
Pneumatic Gripper
DC Motor Torque
Clutches
Magnetic Reed Switches
Automated Torque System
Variable Speed PWM (Pulse Width Modulator).
