The transmissions in the individual gear steps are not implemented with planetary gear trains, but with spur gears. In the cutaway torque converter, one sees the pump and turbine wheel, the free wheel and the converter lockup clutch. A very extensive description of the function is supplied. The shifting processes are initiated electronically, with the gears being shifted by hydraulic clutches via theelectro-hydraulic control unit.
....
The device simulates various working conditions of the engine, cleaning and detecting the fuel injection nozzle of various automobile, and can also carry out the cleaning of the automobile fuel injection nozzle and the fuel supply system. The equipment adopts ultrasonic cleaning technology and microcomputer oil pressure closed loop control cleaning detection technology.
Features:
On-vehicle Cleaning
Ultrasonic Cleaning
Uniformity & Spray ability Test
Direct Flush
Reverse Flush
Auto cleaning test function
Leakage Test.
Beam Mould 150x150x600 MM, with "X" reinforced bands on the base and upper double reinforced walls and corners.
....
Circuit blocks of Memories
Types of memories: RAM and EPROM
Elementary memory cells.
Memories
Elementary memory cells
Structure and operating principles
Theoretical topics of Memories
Memory classification
RAM memory
Sequential memory
Terminology and main characteristics
ROM memory
Fault simulation.
The trainer enables the measurement of air humidity with four different instruments which can be directly compared to each other: two different hygrometers, a capacitive hygrometer and a psychrometer. There are different measuring methods to determine humidity. Psychrometers operate based on the principle of evaporation cooling and compare the ambient temperature with the wet bulb temperature to determine the humidity. The measurement of the air humidity plays an important role in many branches of industry, e.g. during drying or in the air conditioning of buildings and vehicles. Hygrometers utilise the property of specific fibres, e.g. hair, to expand with increasing air humidity. The core element of the trainer is a climatic chamber with transparent door. In the capacitive sensor the dielectricity constant of a layer and with it its capacity changes due to the water molecules absorbed. This chamber can be humidified and dehumidified and contains the four instruments.
....
The Gauging Station teaches interfacing, problem solving, programming, sequencing and operation for go no-go gauging, analog sensor adjustment, non-servo electric traverse axis, synchronous belt drive, ball screw drives and part rejection/transfer. The Gauging Station is a small mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. The Gauging Station is a mobile training workstation with slotted work surface that contains an operator station, ultrasonic measurement module, proximity gauging module, part transfer module, part reject module, finished parts storage module, parts set, a pneumatic distribution module as well as an electrical distribution module, an electro-pneumatic valve manifold, and a digital I/O interface module. Industrial safety and operation are emphasized on all mechatronic stations. The Gauging Station performs a number of quality inspections in the process of assembling a working industrial directional control valve.
Features:
Non servo Electric Traverse Axis
Inductive Sensor
Ultrasonic Sensor
Analog Sensor Adjustment
Magnetic Reed Switches
Go/No-Go Gauging
Synchronous Belt Drive
Limit Switches
Photoelectric Sensor
Ball Screw Drives.
Examination of heat conduction in solids
Radial heat conduction: brass disc with heating and cooling element, 6 temperature measuring points
Linear heat conduction: 3 measuring objects, heating and cooling element, 9 temperature measuring points
Experimental setup consisting of experimental unit and display and control unit
Electric heating element
Cooling with mains water.
Plastic Bending of Portals teaching apparatus enables a range of laboratory, classroom and computer-based experiments for civil, mechanical and structural engineering students studying plastic theory and limit state design in portal frames.
....
Starting And Charging Trainer is the only unit that uses our "friction" load device to show actual current draw on the starter. Starting And Charging Trainer is designed to incorporate live actual components, providing "real world" electrical measurement values. Additional NATEF tasks such as shimming a starter can be obtained.
....
Intended use:
To transfer liquids in clinical laboratory settings applicable for molecular/PCR & sterile microbiological works.
Oxygen concentrators are not suitable to be used as an oxygen source to other medical equipment providing respiratory support, such as ventilators, CPAP devices, High Flow Nasal Oxygen, etc.
Equipped with one oxygen outlet, provided with controllable flow meter.
Audible and visual alarms for low oxygen concentration (<82%) and power supply failure.
Provides a continuous, variable flow of concentrated oxygen (>82%) derived from room air, to a maximum rate 10 L/min.
Contains oxygen monitor to verify concentration.
Audible and visual alarms for high temperature, no flow rate and low/high pressure.
Power efficiency < 70 W/L/min.
Flowmeter continuously adjustable, with markings of at most 0.5 L/min intervals.
Flowmeter control allows shutting off flow (i.e. 0 L/min) by user.
Noise level <60 dB(A).
Digital meter that displays cumulative hours of device operation.
Flowmeter minimum flow rate of 2 L/min. Lower flow rates may be achieved by a combination of the concentrator and a separately supplied flow splitter.
Oxygen outlet(s) with 6 mm (¼-inch) barbed fitting and DISS connector.
Electrical characteristics
Capacity for safe operation from at least ± 10% of rated voltage.
Electrical protection by resettable circuit breakers, fitted in both neutral and live lines.
Electrical power requirements are locally compatible.
230 Volt, 50 Hz, 3.0 amps (120 Volt units available)
Mains power cable length > 2.5 m.
Casing and environment
Hard case, cleanable with standard hospital cleaning materials.
Whole unit movable with wheels on at least two feet
All user-removable filters are cleanable. Cleaning instructions for filters are included in the instructions for use.
The unit includes internally and externally mounted filters for cleaning the air intake.
Unit weight <27 kg.
Material: Austenitic steel (non-quenched, non-magnetic steel).
To dilate the vagina to examine the vaginal canal and cervix.
Speculum, vaginal, self-retaining.
Double blade with a screw mechanism to keep the blades open.
Austenitic steel composition: 16 - 18% chromium; 10 - 14% nickel; 2 - 3%molybdenum.
Blade length: approx. 75 mm.
Blade width: approx. 20 mm.
Reusable.
Endotracheal tube shall meet the required standards describing the dimensions, the tube characteristics, tube point and the tube markings.
Endotracheal tube with:
Radio opaque mark.
With Murphy's eye.
Graduations.
Open distal end and Magill-type point with oral angle of 37.5º.
Standard connector (ext. Ø 15mm) at the proximal end enabling the tube to be connected to the ventilation system.
Endotracheal tube without cuff.
Material: Polyvinyl chloride (PVC).
Disposable.
Sterile.
Size: Ø internal 3.5mm.
Initial sterilisation method: Ethylene oxide gas or Gamma radiation.
To measure the mid upper arm circumference for rapid screening of nutritional stauts of children. Target population: Malnourished children or those at risk, aged 6-59 months.
....
Used as a middle school physics force line to the electric field in the field of the size and direction of the image to express. The demonstration board adopts the "372" material with good transparency. Products is composed of five pieces of electric field line demonstration board, respectively for single point electrode demo board, two point electrodes demo board, parallel plate electrode demo board, an annular electrode demo board, pointed conductor demo board. The shape and size of the five demonstration boards are 108 * 90 * 6.5mm.
....
It is used to do experiments in primary school science: the atmosphere has pressure, the atmospheric pressure come from all directions and the application of atmospheric pressure.
....
Electromagnetic Suit
....
Standards not harmful to the environment or to worker safety
Preservative used enhances stability
Biodegradable, safe and non-toxic
Pre-diluted
Do not include formazin
Ready and easy to use.
Protection with comfort
Made of blue neoprene over yellow latex
Raised diamond grip on palm and fingers for good wet or dry grip
Flock lining to absorb perspiration; permits easy on and off
Ideal for general housekeeping, maintenance applications, food processing and food service applications, as well as industrial use.
Straight cuff
Double-dipped construction provides increased protection, versatile chemical resistance properties, and comfort.
Length: 12 in. (30.5 cm)
Thickness: 28 mil.
Industrial Machines Control Assembly Training Stand Kit
....
