Capacity: 5000 KN
Dimensions dia. x height: 180x200 mm
Single use full face length safety shield, fog-resistant. Encloses a wide area of the face ear-to-ear and forehead to chin. Can be worn with glasses or goggles.
....
The product is mainly composed of six glass tubes with the same shape. The use of low pressure discharge in Physics Teaching in middle school.
....
It consists of round box with a diameter of 200mm and disk divided into 1-6 equal parts. It is used to explain basic concept of fraction, to compare value of fraction, to understand basic properties of fraction and addition and subtraction of fraction.
....
Can provide protection of neck and head.
....
Clean-processed garments offer low level of particle shedding
Cleanroom hood features bound seams for strength and durability. Available in clean or clean and sterile versions.
Eyes-only opening
Snaps for adjustable fit
Bound seams are covered with garment fabric for reinforcement
Bound hood opening for lower particle shedding
Available in clean or clean and sterile versions
Available in medium or large sizes
Greener Choice Claims
Environmental benefits include:
Recyclable.
Experimental unit for testing metal torsion test bars under load until fracture
Strain Gauge Measuring Shaft With Compensation For Own Deformation
Measurement Of Angle Of Twist Using Incremental Encoder
Measuring Device Slidable To Fit Various Specimen Lengths
Test Torque Measuring Using Strain Gauge Measuring Shaft And Measuring Amplifier
Electronic Measuring Amplifier With Touch Panel To Display Torque And Angle Of Twist
Specimen holders: 2x 17mm hex socket
Test Torque Manually Applied Using Handwheel And Worm Gear
Definition Of Input Angle Via Hand Wheel.
Experiments:
Non-dimensional performance characteristics
Flow measurement using a Ventur
Centrifugal pump performance and characteristics, typically head against flow and efficiency against flow
Variation of pump performance with speed
Variation of pump performance with inlet pressure.
The training device is based on the Jetta lighting system. And it can fully display the structure and working process of the automotive lighting system.
Structure and composition:
Headlights, front corner lamp, front fog lights, dimmer switch assembly, tail lights, license plate light, rear fog lamps, side lights, lighting switch assembly, brake light switch, reversing light switch, high-capacity battery or 12V switch power, terminal detection, fault set and troubleshooting system, mobile bench.
Features:
The working principle and process of the lighting system can be demonstrated.
It has troubleshooting and set areas. You can set multiple common faults, stimulate the fault, test the fault and exclude the fault.
It is based on the automotive lighting system components. And it can display the structure of the lighting system.
The color schematics is very easy for the students to analyses and understands the work process of the automotive lighting system.
The instrument foresees three memorized cycle verification program composed of ten measurement each. This user friendly menu driven digital display, connected to load cells allows to perform an accuracys verification of the loads measured from machines under control and it allows to produce the relative certificate.
At the end of the test the unit automatically elaborates the stored value and displays:
Average measured load
Accuracy in %
Effective applied load
Repeatability
Measured load.
Electrical power freely adjustable via potentiometer
Flow meter measurement of the water flows via rotameters
Digital displays for temperature, current and voltage
Functional model of a Peltier refrigeration system
Water-cooled Peltier element
Shared water circuit for heating and cooling with tank, pump and flow meters
Experimental unit with clear design of all components at the front.
Liquid containing barrel is a transparent plastic cylinder, the internal diameter of the shell is not less than 95mm,depth is not less than 285mm. The product is composed of a liquid container, a floating body and accessories. Floating body is composed of a diving boat model, buoy, a counterweight body. The floating body can be floating, suspended, or sinking state in a liquid. The submarine size about 100 x 30 x 35mm; float size:φ40mm×100mm?The counterweight body is composed of 4 supporting and weights 20 grams ; accessories include skin tube clamp, density meter, sucking ball etc.
....
It is used for student to measure area of rectangle, and it is made of PVC material, with 100*100mm, 5mm transparent printing graticule line, and marked with number 1.2.3……9 on the edge.
....
Elastic opening at top and elastic ankle
Serged seams
Highly durable PVC sole
Made to keep out debris, dry particulates, and liquid splashes
Boot covers feature a highly durable PVC sole and are made with breathable, microporous film to keep out debris, non-hazardous liquid chemicals, and dry particulates.
Boot Covers available in 3 sizes, choose from 17 in. or 18 in. height
Adheres to criteria for antistatic materials.
Test specimens made of electrical grade copper
Shearing anvil and tension lug made of hardened steel
Supplementary experiment for the universal material tester for shear loading bolts
Double shear method avoids misleading bending stresses.
Experiments:
Various flow visualisation experiments in two dimensions, including sink and source points and flow around models, for example: Sources and sinks in a uniform stream
Flow through an orifice and a diffuser
Flow through a heat exchanger
Doublet in a uniform stream
Flow around a cylinder (disc) and an aerofoil
Laminar flow relationship for flow between two parallel plates
Mean velocity equations (including seepage in soils)
Potential flow relationships
The momentum equation.Operating Conditions
Operating environment: Laboratory
Operating temperature range: +5°C to +40°C
Storage temperature range:25°C to +55°C (when packed for transport).
The composition and the working process of various ignition system can be demonstrated. The device is based on the multiple ignition system.
Structure and composition:
The ignition system training device contains total six systems be below:
Magnetic induction ignition system,
Photoelectric induction ignition system
Platinum contact ignition system,
Holzer electronic ignition system,
Independent type ignition system without distributor
Group type ignition system without distributor
And include large capacity battery or 12V switch power, detection terminal, fault settings and troubleshooting system, mobile bench.
Features:
It has the specialized troubleshooting and set areas.
The color circuit diagrams are printed on the panel which is easy for the students to analyses and to understand the ignition system.
1-6 types ignition system can be demonstrated.
Demonstration of diesel and petrol processes on an engine with variable compression
Creation of different compression ratios using a height adjustable cylinder
Water-cooled single-cylinder experimental engine for setting up an engine test stand in conjunction .
Engine mounted on base plate
Force transmission to brake unit using claw coupling
Adjustable ignition point
Petrol mode with carburettor
Engine completely equipped with fuel lines and temperature sensors for exhaust gas and cooling water
Diesel mode with direct injection
Fuel hoses with self-sealing quick-release coupling.
It consists of rectangle piece, square piece, right triangle piece, equilateral triangle piece, isosceles triangle piece, circular piece, trapezoidal piece and parallelogram piece.
....
