The AC Ammeters 50/60 HZ trainer includes three analog ammeters for reading alternative current. The trainer is housed into a totally enclosed, stackable and portable, full-size modular cabinet. Protected by diodes. Schematic diagrams and specifications are silk-screened onto the back of the front panel of each unit. Interconnections between components and connections are made through standard color coded safety sockets with banana plug jumper leads. Each ammeter has four reading scales that are adapted to measure the current in experiments with rotary machines, electrical circuits or motor controllers. Included in the Rotating Machines Trainers for 1/3 hp - 250 W.
Educational Advantages:
Each ammeter has four reading scales that are adapted to measure the current in experiments with rotary machines, electrical circuits or motor controllers
Includes three analog ammeters for reading alternative current.
Protective eyewear. To provide protection from particles, liquids and chemicals entry to the eye area.
Durable safety goggles. Indirect-ventilation goggle features angled vents that restrict direct, straight-line passage from the exterior to the interior of the goggles.
Characteristic curves of small power crystal triode and diode can be vividly displayed on the oscilloscope screen and the parameters of measured transistor can be read by scale division of screen. As well as, it can match using with other types professional oscilloscope.
....
Made with a microporous film that is laminated to a spund bonded polypropylene substrate
Standard hood with elastic around the face
Made from microporous film, 50 garments help protect workers who face on-the-job exposure to a range of non-hazardous aerosols, light liquid splash and dry particles.
Elastic wrist
Serged seams
Attached skid-resistant boots
Front zipper closure
White.
The systemallows students to learn about the structure of the engine control system, study its components and operation modes, and perform various measurements,tests and other diagnostic procedures.
Fully functional engine control system CommonRail direct injection installed in a mobile aluminum frame. The educational training system is based on OEM components of Renault.
Technical Specifications and Functions:
Integrated engine control system with dieselCommon Rail direct injection.
Adjustable air flow rate simulator allows todemonstrate a work of mass air flow meter and air temperature sensor.
Integrated simulators allows to changeparameters of engine temperature sensor.
The stand consists of two parts: one isdesigned to demonstrate the work of the high pressure pump and the injectors,the other to demonstrate the electronic engine management system. Both partsare electrically interconnected and operate as a single system.
Manual adjustment of the engine crankshaftspeed.
Monitoring operation of high pressure fuelsupply system, injected fuel quantity, the amount of fuel back leak, spraypattern quality.
The system has a complete electric wiringdiagram of the Common Rail direct injection system.
Integrated simulators allows to changeparameters of intake air pressure sensor.
Diagnostic and Measurement:
Oscilloscope/multimeter
Possibilityto measure electrical signal parameters of each system component.
Systemparameters are measured by connecting to the 4 mm connectors.
Control unit diagnosis
Diagnosisthrough OBD 16 pin diagnostic socket
Displaying the operating system parameters
Activating the actuators
Electronic control unit identification
Reading/erasingfault codes
Refurbishing your old-version Combined Load Bank is a cost-effective alternative to replacing costly equipment.
Refurbishing Work
Complete Load Disassembling
Replacement of panels and working table
Installation of safety binding posts
Verifying and replacement of loads if required
Verifying and replacement of load selectors if required
Rewiring
Complete Console Disassembling
Housing mechanical repair if required
Sand blasting and painting
Complete Testing And Verifying
Inspection report and quality control
Complete electrical and mechanical testing of every load.
It can connect oscilloscope and display three signals waveform, be used in school class teaching demonstration and student extracurricular experiment, and be especially suitable for demonstrating three-phase AC waveform in AC curriculum.
....
Material polyethylene coated spun bond polypropylene
Generously sized in large or x-large
Resistant to liquids
Lint-free
Elastic ankles for secure fit
Will not delaminate
Choose from blue or white slip-resistant sole shoe covers suitable for Cleanroom ISO 6 (Class 1000) controlled environments.
Slip resistant sole shoe covers
Available in blue or white
Seamless
Protects against non-hazardous dry particulates, liquids, and powders
(Class 1,000) and above.
Shut-off valve consisting of housing, hand wheel, clamp cover, packing gland frame, taper and spindle
Shut-off valve parts set, with associated set of small parts, in a sturdy case
Spindle sealing based on the gland principle
Assembly exercise for engineering training
The kit forms part of the assembly, maintenance and repair practice line.
Complete with all actuators and sensors. Manufactured using components from the original engine build. Components arranged for ease of use and identification.
Diagnosticsockets fitted
Self contained, fully operational Fuel Injection Board.
Pin-outfacility on all electrical components using Ø2 mm sockets enabling real-timevalues to be taken without compromising the wiring harness.
The fuelinjector board offers an enhanced training resource, hands-on training withreal components, better understanding for the student without the constraintsof the modern motor vehicle.
Available inwet running version or dry running, using LEDs to indicate injectionoperation.
Frank Constant Tester
....
It is used to understand and differentiate various geometric figures in textbook teaching. It is plastic press forming and consists of cuboid, cube, cylinder, sphere with various shapes and plane figures: rectangle, square, plane quadrilateral, trapezium, triangle and circle.
....
Made of microporous film laminate
Made to keep out debris, dry particulates, and some liquids
Shoe covers are made with breathable, microporous film to protect from debris, non-hazardous liquid chemicals, and dry particulates.
Adheres to NFPA 99 criteria for antistatic materials
Serged seams
Ambidextrous single use cover 5.25 in. or 7 in. height
Choose from fully elasticized formed fit or elastic opening styles.
It is equipped with thermal protection, a start-stop push-button station and two pilot lamps indicating respectively the supply, the run state of the motor driven and the time delay. Specifications and/or diagrams are silk-screened on the back of a clear-plastic front panel for ease of identification. The Synchronous Motor Starter 60 HZ is a starter that can be used to start any synchronous motor even at full load. Connections to the unit are made through 4 mm standard color-coded safety terminals. Used in electrical engineering technology teaching when an AC starter is required, the starter unit is housed in a half-size totally enclosed portable modular unit. The trainer is protected by a either a diode or thermal-magnetic circuit breaker. Requires a 120/208V 60Hz circuit. This permits the utilization of banana-type jumper leads between the single phase power supply and other components in the circuit.
Educational Advantages:
Used in electrical engineering technology teaching when an AC starter is required for applications with a synchronous motor
Three phase unit
Indicates respectively the supply, the run state of the motor driven and adjustable time delay.
Cutaway model of a standard venturi meter
Unit designed for desktop use
Mounted on demonstration panel; 500x400mm.
The synchronizing unit is housed in a totally enclosed, stackable and portable half-size modular cabinet. Schematic diagrams and specifications are silk-screened onto the back of the front panel of each unit. The synchronizing unit is used in teaching electrical technology where a synchronizing switch is required for alternator synchronization. Interconnections between components and connections are made through standard color coded safety sockets with banana plug jumper wires. Following the connection of the synchronizing unit with two different three phase power supplies, three built-in red lamps on the front panel signal the phase sequence and the frequency gap between the two supply units. Protected by a circuit breaker.
Educational Advantages:
Following the connection of the unit with two different three phase power supplies, three built-in red lamps on the front panel signal the phase sequence and the frequency gap between the two supply units.
Used in teaching electrical technology where a synchronizing switch is required for alternator synchronization.
It is used to test conductor and insulator, with acoustic-optic indication. If the green light is switched on and there is a sound, it is a conductor, vice versa, insulator.
....
It is used to explain basic structure of geometric figure and establish concept and application of geometric figure in middle school maths teaching. It consists of cuboid, cube, cylinder, cone, quadrangular prism, rectangular pyramid and ball.
....
Positive and Negative Charge Checker
....
Comfort fit design based on extensive wearer input provides a comfortable garment design that enables a greater range of movement while stretching and bending, a more tailored fit, reinforcement in high stress areas for fewer blowouts, a longer zipper for easier donning and doffing and an elastic waist to better position the garment
Optimized for comfort, softness and breathability while enabling cost savings for disposable garments
Elastic opening for tighter fit at wrist
Attached hood with elastic around face opening
Attached skid-resistant boots
White.
