It is used to measure how fast a trolley moves and conclude formula of object speed.
....
Ties at waist level in the back for a snug, secure fit.
A lightweight, disposable polyethylene apron that is sturdy enough to be reused.
Cavitation Demonstration is a small scale apparatus designed to demonstrate Cavitation utilizing an Hydraulics Bench
Flow control valves upstream and downstream of the test section allow flow conditions to be optimised for the demonstration of Cavitation
The apparatus consists of a circular Venturi shaped section manufactured from clear acrylic
Three Bourdon gauges indicate the static pressure upstream of the contraction, inside the throat and downstream of the expansion
Educational software available as an option
Quick release fitting for easy connection to hydraulics bench.
Advantages:
Engine and transmission application of your choice.
Able to be rotated by hand for demonstration purposes.
Completely enclosed for safe observation.
Ideal for visually identifying different divisions, departments, titles, duties, or access categories.
Double-bagged to “Class 10” specifications, for use in critical environments
Secure badges or ID cards to garments. Cleanroom Badge Clips are made of three inch poly for badges or garments with no pockets. These swivel clips are metal-free.
Non-metal clips perfect for metal-free environments.
Contain no metal
50/pack.
The permanent arrangement of PVC pipes and fittings is mounted on a freestanding support frame that is designed to stand alongside Hydraulics Bench in use.
Self-sealing quick release fittings at strategic points in the network allow rapid connection of the digital hand-held pressure meter, allowing appropriate differential pressures to be measured. Flow leaving any of the outlets in the network is measured using the volumetric facility incorporated on the Hydraulics Bench.
All clear acrylic test pipes are installed using threaded unions with 'O' ring seals that allow the pipes with different diameters to be repositioned without the use of tools.
Isolating valves allow a wide range of different series, parallel and mixed pipe configurations to be created without draining the system. Flow into the network and flow out from the network at each outlet can be individually varied to change the characteristics of the system.
The Four Wheel ABS Trainer can be used in the classroom environment for demonstrations to students. The instructor can manually select which wheel combinations are desired to lockup prior to application of brake pedal. The Four Wheel ABS Trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. The Four Wheel ABS Trainer provides a safe and effective method of demonstrating the principles of braking systems used on todays vehicles. The Four Wheel ABS Trainer is built with OEM components and is based on the 2006-2010 Civic platform.
Advantages:
Demonstrates full functionality of a 4-wheel ABS system
Allows choice of ABS application timing for clearer demonstrations
Allows choice of wheel combinations to lock-up during ABS operation
Trainer follows OEM wiring schematics
Six system faults that are selected by the instructor
Trainer can be used for full mechanical service and repair operations of:
a. Front disc brakes
b. ABS Electrical System (w/ wheel speed sensors)
c. Parking Brake system
d. Rear drum brakes
e. ABS Hydraulic Control unit
f. Master Cylinder & Hydraulic system (w/ pedal).
Provides real world brake pedal feedback pulsations during ABS operation.
Trainer can fit through a standard 30 door opening.
Features:
Real automotive components with fully functional ABS 4-channel hydraulic system
Hydraulic pressure gauges at each wheel (4)
Fault insertion box (lockable) 6 faults
Equipped with DLC for scan tool data stream hookup
OEM vehicle instrument panel with indicator lamps
Heavy Duty metal stand with casters for easy transport of trainer
Four (4) hubs equipped with brakes (2 discs and 2 drums).
Dimension (L*W*H CM): φ22.5
....
The Osborne Reynolds' Demonstration operates in a vertical mode. Flow through this pipe is regulated using a control valve at the discharge end. A header tank containing stilling media provides a constant head of water through a bellmouth entry to the flow visualisation pipe. Velocity of the water can therefore be determined to allow calculation of Reynolds' number. The flow rate of water through the pipe can be measured utilizing the volumetric tank (or measuring cylinder) of the Hydraulics Bench.
The equipment uses a similar dye injection technique to that of Reynolds' original apparatus to enable observation of flow conditions.
Key areas of the starter have been cutaway to allow visual observation of major components while still being functional. The Cutaway Starting System Trainer allows for the demonstration of a complete starting system using real-world components. Requires a 12V battery or jump box to operate.
Advantages:
Fully functional cutaway starter
Demonstrates starter planetary gear reduction
Ability to test and verify a basic starting circuit
Allows students to view all internal starter components during live starter operation
Starter is enclosed in plexiglass to ensure student safety
The starter solenoid can also be bridged with a remote starter switch (not included) using the solenoid primary terminals
Four operational faults can be inserted to promote student diagnostic troubleshooting competencies.
Features:
Clutch pedal safety switch
Crank relay
Electrical test points for crank relay
Ford Modular solenoid (cutaway)
Ford Modular starter (cutaway)
Ignition switch
Electrical test points for testing and diagnosis
Lockable fault box with four manually selected operational faults.
Dimension (L*W*H CM): φ8*8.5
....
Knitting and elastic cuff for more protection
Fluid resistant
SMS non-woven breathable level 2 lab coat
SMS non-woven material
Color: white
AAMI Level 2 standard.
A free standing unit developed to demonstrate the phenomena of pipe surge & water hammer when connected to a Hydraulics Bench.
Electronic sensors used to measure pressure transients at two locations in the water hammer test pipe, one adjacent to fast acting valve and one half way along the test pipe.
Includes two separate stainless steel test pipes, both 3m long, constant head tank, slow acting valve, fast acting valve etc
Straight metal pipes used, rather than a coiled arrangement, to minimize distortion to the pressure profile
A transparent surge shaft (40 mm diameter and 800mm high) with scale allows transient water levels to be observed and timed
Pressure transients monitored using a PC (not supplied) using a USB connection from the pressure transducers (requires no external electrical supply).
The 2.2L Swivel Engine Stand Starting Station for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. A steel mounting plate is used for engine mounting that allows full access for rear main seal and flywheel service. Each engine comes equipped with a manual transmission flywheel. The engine is securely mounted to a heavy duty rotating device equipped with an automatic lock to allow full 360 degree rotation. All necessary engine systems connections are provided to allow live operation of each swivel engine stand. The engine starting station contains all components and systems necessary for the starting and running of the 2.2L engine.
Advantages:
Provides a single starting station that can be used with multiple engine stands
All rotating components are covered with safety shields or guards to prevent injuries
Accessibility of engine components is enhanced by not having the requirement of whole vehicles in the shop
Ability to verify proper engine systems operation before and after engine repair
Continuity of subject matter is provided by students working on identical engines.
The Flowmeter Measurement Apparatus consists of a Venturi meter, variable area meter and orifice plate, installed in a series configuration to permit direct comparison. Pressure tappings are incorporated so that the head loss characteristics of each flow meter may be measured. Pressurisation of the manometers is facilitated by a hand pump. These tappings are connected to an eight tube manometer bank incorporating a manifold with air bleed valve. A flow control valve permits variation of the flow rate through the circuit.
The bench is used as the source of water supply and for calibrating volumetrically each flow meter. The circuit and manometer are attached to a support framework which stands on the working top of the Hydraulics Bench.
The 1.6L Swivel Engine Stand Starting Station is designed for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. The engine starting station contains all components and systems necessary for the starting and running of the 1.6L engine. The engine is securely mounted to a heavy duty rotating device to allow full 360 degree rotation. A steel mounting plate is used for engine mounting that allows full access for rear main seal and flywheel service. All necessary engine systems connections are provided to allow live running of each swivel engine stand for verification of proper student assignment completion. Each engine comes equipped with a transmission flywheel (manual or automatic).
Advantages:
Provides immediate feedback to students for confirmation of their workmanship and instruction completion
Provides a single starting station that can be utilized with multiple swivel engine stands
Accessibility of engine components is enhanced by not having the requirement of a whole vehicle in the shop
Ability to verify proper engine systems operation before and after engine repair assignments are completed
Continuity of subject matter is provided by having students working on identical engines
All rotating components are covered with safety shields or guards to prevent injuries.
Strong, breathable, abrasion-resistant fabric keep workers cool and comfortable while protecting against fibers, fine dusts, and low surface tension liquid splashes
Ideal for use in dusty environments, as well as for painting, manufacture spraying, and agricultural spraying
Air and moisture vapor can pass through to aid wearer comfort
Triple-stitched serged seams
Patented Reflex design is 7.5 times less likely to rip out than ANSI minimums — provides 12% more chest room and 6% longer body length.
Stylish denim blue color masks dirt and grease
Attached hood and boots
Elastic back, wrists and ankles
Can withstand multiple wearing
Zippered front.
