Non-sterile gowns protect healthcare personnel from exposure to toxic chemotherapy drugs during preparation, handling, and administration.
Evaluated for resistance to permeation of 16 chemotherapy drugs
Reinforced critical zones include chest, sleeve seam, sleeve and front belt attachment points where direct contact with infectious material is most likely to occur
AAMI Level 3
Hoop and loop neck, waist ties.
Full back style gowns that close and tie in the back.
Navy chemical resistant lab coat made of flame-resistant CR/FR fabric for multi-hazard protection. Pockets feature covered flaps to secure contents.
Side pass-through allows access to pockets underneath the coat
Durable accessory loop for safety glasses, pens, badges, etc.
Fabric/Material 4.4 oz. CR/FR Aramid Blend FR Nomex knit wrists keep sleeves in place
Bottom side vents for increased mobility
Durable hi-temp plastic snaps for easy donning and doffing
Highly breathable
Easy care and laundering.
Chest pocket with covered flap and pen/pencil slot
Lower pockets with covered flaps to secure contents.
Fabric/Material 4.4 oz. CR/FR Aramid Blend FR Nomex knit wrists keep sleeves in place
Bottom side vents for increased mobility
Durable hi-temp plastic snaps for easy donning and doffing
Chemical Resistant Lab Coat made of flame-resistant CR/FR fabric for multi-hazard protection without weighing you down.
Highly breathable
Easy care and laundering.
Side pass-through allows access to pockets underneath the coat
Durable accessory loop for safety glasses, pens, badges, etc.
Performance Arc Flash Jacket, 40 Cal, CAT 4, Back Stretch Panels, Drawstring Waist, Pleated Elbows, Knit Lined Collar
Designed with added stretch panels for ease of movement and flexibility
Covered zip front closure with large pull tab
Enhanced visibility with FR silver segmented reflective trim.
Using comfort science to keep the wearer cool, dry, comfortable, and unrestricted while working
Single-layer 40 cal arc flash protection
Up to 20% lighter, 48% thinner, and 56% more flexible than other premium arc flash suits.
These jackets feature a snap-front closure and three roomy patch pockets.
Medium weight ESD jacket ideal for all working environments and numerous applications
Made with highly durable materials and maintains consistent continuity readings, even after 100 wash cycles
ESD Jackets with Lapel collar and knit cuff provide high-quality ESD protection are fabricated from lightweight 90% polyester and 10% carbon fabric for unmatched operator comfort.
ESD Cleanroom Frock protects the controlled environment from the number one source of contamination and static found in cleanrooms – people.
Transforming Technologies ESD Cleanroom Frock is engineered to meet up to a Class 1000 cleanroom demands for industries such as microelectronics, semi-conductors, disk drives, laser, and similar industries. The Cleanroom Frocks are made with a high-end static dissipative grid fabric for eliminating static on the wearer in cleanrooms and shielding static charges generated while moving.
Transforming Technologies ESD Cleanroom Frock protects the controlled environment from the number one source of contamination and static found in cleanrooms – people. Electrostatic charge is an invisible contaminant that has the potential to degrade or destroy both product and equipment, as well as attract unwanted particles. Controlling these charges on mobile operators with the Garment System throughout the controlled environment is essential to a productive manufacturing process.
The frock features a military collar, ESD knit cuffs, and YKK zipper closure with adjustment snaps at the neck.
Zipper closure with snaps for easy gowning
Seams sewn with conductive threads and grounding tape for reliable panel-to-panel electrical continuity
ESD Grid Fabric—99% Polyester / 1% Carbon
Raglan sleeves with ESD knit cuffs for body contact
Military collar
Sizes: XS-5XL
Product Circularity: Reusable / Launderable
Color: White / Navy / Light Blue.
Expanded back, rear entry, side air inlet, double storm flap with hook and loop closure, cloth zipper
For Use With (Application): Ideally used with wider range of chemicals.
Closure Type: Double Storm Flap with Hook and Loop Seal
Seam Type: Sealed, Taped
Resistance: Chemicals
Back Style: Expanded
Size: 2X-Large
Color: Gray
Provide increased protection with resistance to a wider range of chemicals
Zippered front
Attached hood
Color: Gray
Applications:
Valuable in applications where rip-out is a concern.
Designed to be worn on or near roads. Single Pocket Hook and Loop Mesh Vest are highly reflective hat allows wearer to be seen during day.
Polyester mesh construction (100%)
Mic tab, chest pocket on left side.
Hook and loop front closure ( Diameter: 2 in.)
Reflective material (Width: 2 in.).
Attached hood, zipper front
Material: Vinyl
Neck Style: Hooded
Size: Medium, Large
Closure Type: Zipper
Seam Type: Stitched, Taped
Color: Green
Size (English) Inseam: 31, 32 in.
Insulated ear barriers provide extra protection against wind, water and cold
Strip of reflective film above the back of neck offers visibility in low-light or dark hours of the day.
Feature two built-in pockets to hold regular-size Hot Rods warming packs
Short elastic strip in the forehead area keeps liner snug to face.
Two layers
Color: Navy
Three layers
100% quilted nylon shell
2mm foam center layer
100% cotton twill top
Fleece lining
Flame-retardant until washed
Fleece lining
Color: Green.
Snap-Front 100% Cotton White Coveralls feature the advantages of cotton in a sturdy coverall.
This oversized coverall has snap-front closure for easy on-and-off and you'll enjoy the convenient pocket storage.
The oversized fit allows you to wear these over any outfit.
Primary Closure: Concealed Snap/Gripper
Wash Care: Industrial Laundry - Heavy Soil, Industrial Laundry - Light Soil, Home Wash
Collar: One-piece, topstitched
Pocket: Two set-in front pockets, two patch hip pockets, two breast pockets, rule pocket
Fabric: 8.5 oz. Twill
Blend: 100% Cotton
Finish: Pre-shrunk
Closure: Concealed heavy-duty snap-front
Two side pockets, two chest pockets, two back patch pockets and a ruler pocket provide ample storage for tools and personal items
100% Cotton for all-day, on-the-job comfort
Covered Snaps keep painted surfaces polished and protected
Styled to be worn over clothes
Gender: Male
Materials: Twill, Cotton.
Fit Details: Fits true to size. Meant to be worn over clothes.
Regular length (30 in. inseam) fits 5 ft. 7 in. to 5 ft. 11 in.
Type R Class 3, 3-in-1 High Visibility Bomber Jacket can be worn in a variety of ways for ultimate adaptability in changing weather conditions.
Zip-out fleece liner can be worn on its own, or zip-off the sleeves to create a fleece vest
Inset hood with drawstring and stoppers can be removed
Large hidden external zipper pocket for secure storage
2 in. ANSI-compliant reflective material for night-time conspicuity
Black panels on sleeves hide dirt and wear
External zipper chest pocket, dual slot pen pocket on arm, and dual mic tabs for clipping radios
300D performance ripstop polyester outer shell with PU coating resists water and wind while still being breathable for comfort
280 g fleece body and thermal insulated, quilted sleeves for warmth without the extra bulk
Storm flap snap front covers front zipper
Machine washable.
Design with D-ring access and multiple pockets.
....
Constructed of 100% aramid fiber
Tubular knit design with optional thumb hole keeps sleeve in place
Double-ply construction
Sleeves protect against cuts and abrasions from glass, metals and other sharp objects.
Cut level 3
One size fits all.
Freestanding units hold everything from bouffant caps to shoe covers— each in its own compartment
Sturdy, see-through acrylic for unobstructed viewing
Open top offers easy access
Flame-treated edges
Rubber pads prevent slipping and scratching
Three-compartment dispensers measure 13L x 18.5W x 7 in. H (33 x 47 x 17.8cm).
Material: Polyester
Neck Style: V-neck
Tape Type: 2 in. reflective stripes
Color: Lime Green
Size: 5X-Large
Length (English): 10.25 in.
Length (Metric): 26 cm
Height (English): 15.25 in.
Height (Metric): 38.7 cm.
Material: Polypropylene
Color: White
Disposable: Single-use
Closure Type: Zipper
Ankle Style: Open
Cuff Style: Open
Size: 2X-Large
Seam Type: Serged.
Manufactured with 100% cross-linked polyethylene with heat-sealed seams. Strong, durable, impervious to non-hazardous liquids, and critical environment compatible.
Provides full liquid protection and is commonly used in microelectronics and pharmaceutical industries.
This product is recommended for use in a cleanroom Class 100 -1,000 critical environment
All shoe covers are tested and manufactured in under inspection and stringent process control to ensure quality standard and product specification compliance.
Strong and durable shoe covers are heavily textured for a sure grip and are compatible with class 100 environments.
Individually inspected for stitching, sizing, materials and workmanship
Lot traceability
Lightweight material offers comfort and breathability, while maintain snug, full coverage
Color: Blue.
