Intended use:
Various general clinical laboratory usage conditions including sample preparation, separation, centrifugation, and cold storage.
Rotator mixer for blood samples to ensure a homogenous mixture for clinical laboratory applications.
....
Set of winter clothing for child aged 7 years.
....
Vaccine storage capacity: 225 L
Volume category: >120L
Refrigerant: R600a, 68 grams
Energy consumption, stable running (kWh/24 hours): 2.04
Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Operating temperature: Min and Max rated ambient temperature:+10 C and +43°C
UIFPF- Grade A
Equipment operating voltage and frequency: 220-240 Volt, 50Hz/60Hz or 100-127 Volt 50Hz/60Hz, 1ph.
Vaccine storage capacity: 102 L
Volume category: >/= 60, <120L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Refrigerant: R600a, 100 grams
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Remote Temperature Monitoring (RTM) system for real time monitoring of storage conditions at different levels of the vaccine cold chain: (a) capable of alarm notifications via SMS, email and/or iOS & Android mobile applications (b) with integrated audio-visual alarm (c) with data access, setup of alarm thresholds and setup of alarm recipients through internet accessible dashboard (d) with automatic transmission of data to a server (e) configurable to suit specific applications and scalable to allow for the later installation of additional temperature monitoring products and/or storage facilities.
....
Suitable for preliminary emergency response set-up or small size field office installations. It is not recommended as a permanent solution or for large and heavy antennas. Complete portable antenna mast supporting light-weight HF and VHF antennas for temporary installations.
....
A1 Manila paper, assorted colors, 80 sheets, SRA1
Size - 900 x 640mm
Material: Cotton/polyester blends.
The edges of the insignia overlock-stitched or heat cut, to avoid fraying.
Color: Cyan blue, with a woven horizontal logo in white, centered vertically.
Insignia, cotton/polyester blend, rectangular, 85x41mm.
Board games containing 3 individual boards and game pieces for chess, checkers and slides and ladders.
Size is 30x30cm +/- 2 cm. The boards for the games is made from approx. 2mm recycled board and laminated on both sides with full color printed images of the games.
Ultrasonic fetal heart detectors are low-cost devices used in a variety of healthcare settings to provide audible and visual information about the fetus. The primary purpose of the fetal heart detector is to provide quick reassurance of fetal well-being to both the mother and the healthcare worker. Certain conditions, such as vaginal bleeding or lack of fetal movement, can cause anxiety in the mother, making her question the health of her unborn baby. Ultrasonic fetal heart detectors can easily detect fetal heart motion throughout the pregnancy, starting as early as 8 weeks. The fetal heartbeat cannot be heard with an obstetric stethoscope until 24 weeks after conception.
....
Anaesthesia units are highly complex devices requiring specific infrastructure provision to be able to operate. They need a scavenging system, pipped medical air supply, and oxygen and nitrous oxide sources which can be piped or from cylinders. In addition, these machines require trained operators and technicians to carry out preventative maintenance so the units can operate safely.
The patient is anesthetized by inspiring a mixture of O?, the vapor of a volatile liquid halogenated hydrocarbon anaesthetic, and, if necessary, N?O and other gases. Because normal breathing is routinely depressed by anaesthetic agents and by muscle relaxants administered in conjunction with them, respiratory assistance is also provided via either an automatic ventilator or by manual compression of the reservoir bag.
Anaesthesia units dispense a mixture of gases and vapours and vary the proportions to control a patient's level of consciousness and/or analgesia during surgical procedures. Anaesthesia units primarily perform the following four functions:
- Blend gas mixtures, in addition to O?, that include air or nitrous oxide (N?O) along with an anaesthetic vapor.
- Facilitate spontaneous, controlled, or assisted ventilation while using these gas mixtures.
- Provide oxygen (O?) to the patient
- Reduce, if not eliminate, anaesthesia-related risks to the patient and clinical staff.
Drum, sterilizer.
Material: Austenitic stainless steel, smooth surface.
Austenitic stainless steel composition: approx. 8-10 % nickel, 18-20 % chromium.
Reusable.
Air vents system to allow steam to circulate freely during the sterilisation cycle.
Lateral air vents system is preferable to top and bottom air vents.
Closing lid with a clip lock.
Carrying handle.
External diameter: approx. 340 to 350 mm.
Height: approx. 180 to 200 mm.
Thickness: approx. 0.6 to 0.7 mm.
For removal of retained products of conception from inside the uterus.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15-0.40 % carbon, 13-14% chromium.
Uterine curette.
Blade edge type: Sharp.
Length: Shaft 26 cm.
Width: Spoon 12 mm.
Shank type: Rigid.
Blade shape: Oval, fenestrated.
Reusable.
The set contains two Kocher forceps to clamp the umbilical cord (time needed to tie up), and a pair of "episiotomy scissors" and a pair of scissors to cut the umbilical cord. Most of episiotomies are performed at the last moment, so the set must always be available and ready for use.
This set should be considered part of any minimal investment in a health facility with obstetrical activities. A fully functional obstetrical environment as well as a professional midwife must be available.
Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Intended use: inject fluids into, or withdraw fluids from, the body.
Blister packed.
Ready-to-use Therapeutic Food (RUTF), spread, 150 sachets of 92 g per carton. The RUTF paste may be used in climatic extremes from the arctic to tropical zones and may be the sole source of food, except for water and breast milk, during the period of use. Ready-to-Use Therapeutic Food (RUTF)paste, is a high-energy fortified food to be used by humanitarian agencies, governmental and non-governmental organizations for the treatment of Severe Acute Malnutrition (SAM) in any cultural setting in accordance with guidelines for the outpatient care and management of Severe Acute Malnutrition.
....
Users guide School in a Box Kit, English Module 4
....
Wheelchair, manual assistant-controlled: Transport wheelchair.
POSTURAL SUPPORT: For older CHILD and ADULT users who can sit upright and balanced without additional support.
FUNCTION AND ENVIRONMENT: Standard wheelbase and overall length. For intermittent or short-term transport in healthcare facilities.
SUPPLIED WITHOUT CUSHION.
Inappropriate prescription and fitting of wheelchairs, cushions and accessories may harm the user’s health and/or function. Therefore, this product should only be purchased after consultation with the Medical Devices Unit in Supply Division.
....
MALE BODY ARMOUR- SIZE XXX-LARGE
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear extraction grab strap (for speedy evacuation of injured/ casualties), detachable comfort lining, and detachable UNICEF logos for front and back. Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting. Fitted with front, rear, and side external pockets for insertion of hard ballistic plates.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state, includes clear plastic ID sleeve. Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, back coated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellency. Black webbing to attach accessories.
