The program consists of a trainer built with genuine equipment and educational materials to teach the fundamentals of Common Rail fuel injection and engine control. The electronics are faulted in order to create problems in the fuel system for student diagnosis and practice. Cummins Diesel Trainer is constructed from a Cummins type vehicle, using an electronically controlled Diesel fuel injection.
....
Complete with connecting cables, experiment manual, interface to PC and software for data acquisition and display. Solar Wind Fuel Cells Energy Trainer has been designed for the study of renewable energies: solar energy, wind energy and hydrogen fuel cell systems.
Training Objectives:
Determining characteristic curve of solar panel
Hydrogen/oxygen or hydrogen/air operation
Assembling a fuel cell
Determining electrolyser efficiency
Learning about Faradays laws
Determining characteristic curves of fuel cell
Producing and storing hydrogen
Determining decomposition voltage of water
Building a model hydrogen car
Using methanol to generate electricity
Determining characteristic curve of electrolyser
Determining fuel cell efficiency
Voltage and current in a series connection of solar panels
Voltage and current in a parallel connection of solar panels
Determining characteristic curves of DMFC
Influence of the surface of a solar module on voltage and current intensity of a solar module.
The can serve the purposes of training students on new generation of digital autopilots, as well as familiarizing the students with the essential features of EFIS. The Two-axis digital autopilot trainer is based on an EFI Swith autopilot interface, usually found in light aircraft.
The interface to the EFIS results in autopilot operation in the following modes:
Heading Mode
GPS Navigation Mode
VOR Navigation Mode
Ground Track Mode
GPS Steering Mode
Altitude Mode
Turn-Around Mode
Localizer Tracking Mode.
The EFIS Display has the following characteristics:
Display Type: LCD, TFT (Thin Film Transistor)
Resolution: 854 x 480 color pixels.
Back light: at least 800 nits
Size: 7.0 diagonal (178 mm).
The Car Lighting System Trainer allows learning the marks and graphic symbols of the electrical installation elements according and testing the resistance, the voltage and the power in the vehicle installation system. Complete with user manual that will allow teachers to develop their own experiments.
The Car Lighting System Trainer includes the following systems:
Direction indicators, hazard lights
Headlight lift regulator
Vehicle interior lighting
Wiper equipment
Window wash system
Passing lights, driving lights and parking lights
Fog lights
Brake and reversing lights
Vehicle horn sound.
Biodiesel Process Trainer PLC Controls provides students the opportunity to gain real operating experience focusing on all aspects of biodiesel production the chemical process, control strategy, and management of the chemical process. The Biodiesel Process Trainer is a pilot-scale plant that demonstrates both batch and semi-continuous conversion of vegetable oil feedstock into biodiesel. The Biodiesel Process Trainer has instrumentation to provide for control of all process flows, temperatures and levels.
Function:
The rate of reaction is influenced by several factors including temperature and degree of mixing. The Biodiesel Process Trainer is designed and built for instructional use and includes many student-friendly features. The conversion of triglycerides into biodiesel is normally performed by base-catalyzed conversion. This reaction takes place at modest conditions of temperature and pressure and can produce conversion rates over 98%. This highly flexible process trainer incorporates various commercially available mixing technologies and process configuration options to allow for the comparative analysis of the technologies currently available in the biodiesel industry. The main reaction vessel is constructed from industrial glass allowing the students to visually monitor the trans-esterification process.
Complete with connecting cables, experiment manual and software for data acquisition and display. Trainer for the theoretical practical study of the hydrogen based fuel cells energy.
Training Objectives:
Determining characteristic curve of solar panel
Voltage controlled automatic measurements
Determining characteristic curve of electrolyser
Study of a fuel cell stack up to ten cells
Determining fuel cell efficiency
Determining decomposition voltage of water
Producing and storing hydrogen
Learning about Faraday's laws
Determining characteristic curves of fuel cell
Monitoring single cell stack voltages at your PC
Power controlled automatic measurements
Long term measurements at your own PC
Fixing the output at different operating points of the fuel cell stack
A system of solenoid and manual valves enables the desired configuration to be chosen, to simulate the most commonplace faults and to section the circuit during maintenance operations. The Modular Trainer On Refrigerator System enables the study of refrigerator systems based on different types of compressor (hermetic, semi-hermetic, open) and expansion systems (thermostatic valve, thermo-pressure valve, capillary tube). The system uses CFC-free refrigerant fluid Freon R134a (HFC) and includes measuring instruments to monitor operating parameters and test the refrigerator circuit. Modular Trainer On Refrigerator System uses air condensers (one for each compressor) and an air evaporator and includes a defrosting system based on electric resistances operated by a timer.
....
The turbine housing is transparent so as to show how the turbine uses the inertia produced by a water jet. Through the different indicators of the system, it is possible to visualize all the variables related to the transformation of energy. The Hydroelectric Power Trainer is designed for the study and display of both the behavior and the characteristics of a Pelton turbine. The braking device by means of an electric brake allows working at different speeds in a simple and effective way.
Training Objectives:
Efficiency of the turbine electric generator system
Characteristic curves of the turbine
Curves of iso efficiency.
It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless bread board. The design is easy to operate and easy to understand. Logic Trainer: The logic trainer is designed for the logic beginners to enhance the comprehension of basic logical theory.
Features:
Pulse generator
Eight LED indicators
Debounced logic switches
Basic logic gates
DC power supply +5V, -5V and ±15V
Solderless breadboard
Console style case.
Fuel Cells Systems Trainer has been designed for the study of fuel cell systems. It is safe and easy to be operated. It teaches their engineering principles and it allows performing a set of experiments for educational purposes.
Training Objectives:
Fuel Cells Systems Trainer is very flexible, modular and suitable for the understanding of basic principles as well as more complex technology concepts.
It allows performing the following experiments:
Familiarize yourself with the trainer
Calculation of the energy efficiency of the (Proton Exchange Membrane) PEM Fuel Cell
Performance of the (Proton Exchange Membrane)PEM Fuel Cell with fixed loads, with DC/DC Converter
Performance of the (Proton Exchange Membrane) PEM Fuel Cell with fixed loads, without DC/DC converter
Recording of the current/voltage characteristic curve of the (Proton Exchange Membrane) PEM Fuel Cell with variable load.
Contactor Circuits in Three Phase Systems Trainer with Assessories
....
Breastfeeding trainer is used to support demonstration of proper positioning and attachment during breastfeeding and learning breast milk expression.
Trainer is attachable to manikin or individual demonstrating the procedures.
Materials of the simulator: Neoprene, poly vinyl chloride (PVC),
Polypropylene - PP, Silicone, Chlorinated polyvinyl chloride- -CPVC, Polyester, Nylon, Lycra,
Wearable task trainer to simulate adult female breasts, has a realistic appearance and size of nursing mother’ breasts.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted and anatomically accurate, feeling smooth / resilient, as relevant and malleable parts suitable for simulation.
Electronic Climate Control AC Trainer is an automotive air conditioning program designed to offer hands on air conditioning systems for students. The trainer consist of an electronic climate control air conditioning unit including: Compressor, blower, fan, evaporator condenser, accumulator, pressure switch and related parts mounted on an industrial duty mobile cart. The components are based on an AC unit, complete with electronic controls, and comes precharged with refrigerant. Included are a set of charging hoses and manifold gauges and battery cable.
....
The trainer features a fully functioning Automatic Transaxle Trainer that can be manually shifted through all foreword and reverse gears. It features the popular Automatic Transaxle found on most chrysler front wheel drive cars. The Automatic Transaxle Trainer is designed to assist in educating the fundamentals of a front drive transaxle. The package includes a complete compentency based training program which instructs the student from basic operation and adjustment to complete overhaul of the transmission.
....
Training Objectives:
Operating the wind turbine and the anemometer
Braking in the braking mode
Braking in the no load operation/open circuit/free spinning mode
Identification of the components
Installation and testing of the anemometer
Installation and testing of the wind turbine
Battery regulating and charging
Supplying AC load with wind power and a battery
Direct current wind energy installation
Supplying AC load with wind power stored in a battery
Complete system for wind energy.
Temperature, level, flow and conductivity control loops can be implemented
Manual control, single feedback loops, through to sophisticated cascade loops and distributed supervisory control of the whole process by a remotely located computer can be demonstrated
The effect of dead time and heat recycle can be demonstrated
A bench mounted process plant trainer with multiple streams both interacting and noninteracting. The process plant incorporates a miniature three-stage plate heat exchanger heated from a hot water circulator, two independent feed tanks, a holding tube with product divert valve and two variable-speed peristaltic pumps
An electrical console provides measurement and control of the process plant and enables a variety of control techniques including manual operation, on/off control, control from an external signal and control from a PC or PLC
The equipment incorporates electrical fault simulation and control, data logging software, and a USB computer interface.
Features:
Multiple inputs, multiple sensors, multiple control strategies
Operational sequencing, including startup and shutdown
Recycle implications on process control
Effects of dead time
Manual control, single feedback loops, through to sophisticated cascade loops
Temperature, level, flow and conductivity control loops can be implemented.
The light intensity can be manually adjusted through a potentiometer or automatically controlled to allow performing experiments with different light intensities, therefore simulating the light conditions from dawn to twilight. Lamps For Photovoltaic Solar Trainers is used to provide suitable lighting to the photovoltaic solar module.
The Lamps For Photovoltaic Solar Trainers includes the following main components:
Magnetothermal switch, differential 10A
Potentiometer, 10k
4 off halogen lamps, 300 W each
Dimmer for controlling the light intensity.
Complete with connecting cables and experiment manual. Photovoltaic Solar Energy Trainer is mounted on a mobile structure that allows it to be moved to the venue for practical sessions and allowing the photovoltaic panel to receive solar radiation.
Training Objectives:
The photovoltaic panel, which can be inclined through a range of 0 to 90, and the calibrated cell used to measure solar irradiation, are on one side, and all of the components of a basic photovoltaic facility used to provide 12 V of direct current and 230 V of alternating current are on the other side.
Identification of all components of the trainer and how they are associated with its operation
Measurement of the voltage and power parameters of the photovoltaic panel
Programming the load regulator
Analysis of the installation of the trainer
Measurement of solar irradiation
Alternating current supply
Direct current supply.
The basic module includes the electrical equipment and the components for the Level control. The Modular Process Control Trainer system is a modular and low cost trainer based on Personal Computer and suitable to study the Process Control techniques. It is possible to carry out the laboratory activity in an extremely productive way using the potential of a Personal Computer. Some additional kits allow to fulfill the Flow, Pressure, Temperature, pH and conductibility control by using most of the basic module components.
....
