Made of rigid plastic.
Capacity up to 4.7 L.
Clear lid to view fill level.
Leak proof, puncture resistant.
Built-in needle removal port.
Upright and stable during use.
Properly labelled with a biohazard label.
Able to close with a tight-fitting, puncture-resistant lid without sharps being able to come out.
Leak-proof, puncture-resistant plastic container for disposing potentially infectious sharps.
Maintenance Kit containing Leakage Detector
....
The board enables the encoder to update the buffer and the latter can be read and cleared from the Personal Computer. A special software program running in the MS-Windows environment enables the students to perform the tests through the Personal Computer. Interfacing with the PC is via a board fitted with a digital buffer containing the angle position of the encoder. The unit includes all the measuring instruments necessary for the execution of the tests and numerous measuring points to check the most important signals with the aid of external instruments. Study Unit On DC Motor Position Control With Incremental Encoder makes it possible to study the position control techniques for a DC motor by means of an incremental encoder and a Personal Computer.
....
All electrical components are industry standard components and the system circuit diagram is printed on the front panel. Test sockets are inserted to enable measuring instruments to be connected for fault finding. It includes 30 fault insertion switches.
An Industrial Air Conditioning Controls Simulator for studying the function of the electrical components commonly used in air conditioning equipment. It also allows students to become familiar with fault finding and diagnosis.
The has been designed and manufactured to incorporate all current safety standards.
The shows the electrical circuit for an air conditioning system with simulated winter (heating) and summer (cooling) operation. The compressor, fan and heater are automatically simulated in the equipment.
Electronic Climate Control AC Trainer is an automotive air conditioning program designed to offer hands on air conditioning systems for students. The trainer consist of an electronic climate control air conditioning unit including: Compressor, blower, fan, evaporator condenser, accumulator, pressure switch and related parts mounted on an industrial duty mobile cart. The components are based on an AC unit, complete with electronic controls, and comes precharged with refrigerant. Included are a set of charging hoses and manifold gauges and battery cable.
....-lab-1057443369.jpg "Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Laws)")
Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Laws)
....
The Study of microcontroller Electronic Engineering Lab
....
Flow Control And Regulation Study Unit makes it possible to analyze the behaviour of a control loop where the controlled quantity is the flow rate of a liquid in a circuit. Students can examine the effects of the different control parameters on the performance of the control chain and on the stability of the system; furthermore, they can become familiar with the components commonly adopted in modern industrial applications, as the system is entirely made of industrial quality components. The unit can be had in two versions, where the control element consists of a pneumatic valve or a motorised electric valve. Compared to other quantities such as the level or the temperature the flow rate varies as a function of the regulating signal ina very quick way. This makes the problem of choosing the most suitable control technique very interesting.
....
A bench-top unit for simulating the control systems installed in a building and studying the control and management of the various systems installed in a large industrial / commercial building.
....
The heart beats are typically conveyed audibly via the measuring/display unit and attached probe which is applied to the surface of the pregnant woman's abdomen. The device aids in determining foetal viability. A portable, hand-held, battery-powered device assembly consisting of a measuring and display unit and an attached probe or interchangeable probes designed to noninvasively detect foetal heart beats using ultrasound/Doppler technology.
....
Industrial Machines Control Assembly Training
....
Bench-top unit.
Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Anodized aluminum structure and panels of painted steel.
Air condenser.
High pressure control.
Coolant accumulation tank.
2 Manometers.
Coolant compressor, computer controlled.
Evaporator-freezer, with two freezing plates of 180 mm x 280 mm. One freezing plate is fixed and the other one is height adjustable.
Four-way valve.
Expansion valve.
6 Temperature sensors, type J (temperature measurement of the food).
8 Temperature sensors:
2 Temperature sensors, type J (temperature measurement of the coolant).
Temperature Control And Regulation Study Unit makes it possible to analyse the behavior of a control loop where the controlled quantity is the temperature of aliquid in a tank. Students may test out the use of different types of regulators, as are currently employed in industrial applications, and thetests can be performed in highly realistic conditions, as the system is entirely made of industrial quality components. Temperature control is one of the main problems encountered in factory automation and process control. It is also extremely interesting for teaching purposes, because temperature varies very slowly over time and therefore makesit possible to apply different control techniques and to assess the effects of the control parameters involved. It is suitable to an interdisciplinary laboratory, because it includes mechanical, chemical, electronic and EDP contents. With this trainer, all the tests can be performed through a Personal Computer and a special software for Windows.
....
The Computer Controlled Torsional Vibration Unit is an unit designed to study the torsional vibration, the torsional stiffness and the behaviour of a torsional vibration system with two and three torsional weight vibrator.
Vibrations are transmitted into the torsion bar by means of an electrical motor, which speed is computer controlled. The bar is supported by the base with movable pillars.
An adjustable damper can influence in the vibrations. Shaft encoders on the chucks provide the amplitude of vibration as an electrical signal.
Rigid weight discs, of several diameters and inertia, and pivoting bearings can be located at unlimited positions along the bar.
To facilitate the theoretical comprehension, the exercises are made with a metal torsion test bar, the main element of the unit.
Weight discs can be fixed to the bar with the aid of chucks and flanges; this way, it is possible to assemble torsional vibration systems with one, two or three weights.
This programmable logic controller training system features 1000 PLC mounted on an 11-gauge steel panel for use with Electric Motor Control Learning System. PLC Motor Control Learning System covers the basics of PLC knowledge and how to operate them, PLC programming, timers, counters, and PLC integration with motor control components.
Programmable Logic Controller (PLC) Motor Control Learning System teaches learners how to control the movement and velocity of AC motors using 1000 PLC. A common example of PLC motor control is the positioning and homing of an indexing table. Almost every industry uses PLCs to control AC motors including manufacturing facilities, steel manufacturers, paper manufacturers, and many others making this one of the most common applications for PLCs.
Learners will then use this PLC knowledge to practice hands-on skills by linking the PLC to a motor starter, a reversing motor starter, and many other real-world devices.
Features:
Builds a strong understanding of PLCs and their applications
Expands motor control skills from purely ladder logic to programmable control
Use a PLC to control an AC motor.
The Essentials of Process Control (EPC) range of products takes students through the fundamentals and principles of process control and progresses to give them a thorough grounding in the control of physical processes. Four independent process units demonstrate level, flow, temperature and pressure as the controlled variable.
The effect of making changes to the system or to the controller configuration can be quickly investigated by applying repeatable disturbances or step changes to the process. The concepts of closed loop control, including on/off control, proportional control, proportional/integral and proportional/integral/derivative (PID) control can be explored and demonstrated. Some units also cover both time proportioning and analogue control of the same parameter. Comparison of the responses obtained with different control settings clearly demonstrates the need for correct matching of the controller to the system characteristics. Each process is supplied complete with software that allows it to be controlled using a Windows PC via a USB connection.
The plc has the control algorithms implemented in ladder logic and so are fully accessible to the user. To demonstrate industrial control systems, two further controlling devices are available, a full function commercial PID controller with autotune, and a programmable logic controller (PLC). This is demonstrated by a sensor calibration apparatus designed specifically to demonstrate this subject. Another fundamental aspect of process control is an understanding of sensors and how they are calibrated.
Features:
Open Loop and Closed loop processes
Time proportioning control
Onset of instability
Manual loop tuning
On/off control (Fixed Dead Band)
P, PI and PID control
Underdamping and overdamping
Effect of Sample Time and Cycle Time
Sensor Calibration
Effect of filtering on sensor outputs
Commercial PID controllers
Ladder Logic controllers
Sensor electrical characteristics
Autotuning.
The programmable controller is one of the most important developments in industrial automation because of its ability to be quickly programmed to control a wide range of industrial processes and machines. Computer Control Learning System covers how to program, operate, and interface programmable controllers in a variety of industrial applications used in the automotive, packaging, and technological assembly industries, to name a few. Typical applications include: robots, conveyors, electric motor controls, air conditioning, process control, plastic injection molding, and CNC machines. The Computer Control Learning System PLC I/O terminals are wired to heavy duty banana jacks, enabling learners to quickly connect the PLC I/O to the I/O devices. Computer Control Learning System also includes communication cable, student curriculum or interactive multimedia, and a student reference guide, and requires PLC programming software. The Computer Control Learning System includes a metal, silkscreened enclosure mounted with an industrial 1000 programmable controller. The enclosure mounts to the Electric Relay Control Learning System to provide control of real-world electrical and pneumatic application devices.
Features:
Plug-In Interface to External Devices
Multimedia Curriculum Available
Industrial Standard Components
Heavy Duty Welded Steel Workstation
Student Reference Guide.
Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Bench-top unit.
Anodized aluminum frame and panels of painted steel.
The basic module includes the electrical equipment and the components for the Level control. The Modular Process Control Trainer system is a modular and low cost trainer based on Personal Computer and suitable to study the Process Control techniques. It is possible to carry out the laboratory activity in an extremely productive way using the potential of a Personal Computer. Some additional kits allow to fulfill the Flow, Pressure, Temperature, pH and conductibility control by using most of the basic module components.
....
Diagram in the front panel with similar distribution to the elements in the real unit.
Anodized aluminum structure and panels in painted steel.
Main metallic elements in stainless steel.
