Elastic openings for tighter fit at wrist and ankle
Bound neck for lower particle shedding
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Front zipper closure for easy donning and doffing
Sleeve design for greater range of motion and comfort
Clean-processed garments offer lowest level of particle shedding within product portfolio
Bound seams are covered with garment fabric to reinforce the seam
Greener Choice Claims
Environmental benefits include:
Recyclable.
The interaction of these two valves is sometimes difficult for students to grasp. When students can see inside the valve, while the instructor is explaining how it works with the color-coordinated PowerPoint slides, they will quickly grasp the valves function. The Cutaway Pilot Operated Pressure Relief Valve is an application that can be chosen to demonstrate the operation of a pilot-operated pressure relief valve that consists of two direct-operated relief valves.
Educational Advantages:
Allows students to see inside the valve and to quickly grasp the function
Demonstrate the operation of a pilot-operated pressure relief valve
Shows the interaction of two direct-operated relief valves.
Clean-processed coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Elastic openings for tighter fit at wrist and ankle
Clean-processed garments offer lowest level of particle shedding.
Bound seams are covered with garment fabric to reinforce the seam
Sleeve design for greater range of motion and comfort
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing.
Refurbishing your old-version Contactless Torque Meter is a cost-effective alternative to replacing costly equipment.
Refurbishing Work
Replacement Of Torque Sensor (Transducer)
Adding of an analog output mounted on a BNC plug
Adding of two DEL indicators for clockwise/counterclockwise
Installation of electronic contactless transducer (50/0-30 Nm)
Adding of an electronic board for digital torque readout
Complete Console Disassembling
Housing mechanical repair if required
Sand blasting and painting
Complete Testing And Verifying
Inspection report and quality control
Electrical and mechanical testing.
Shut-off valve consisting of housing, hand wheel, clamp cover, packing gland frame, taper and spindle
Shut-off valve parts set, with associated set of small parts, in a sturdy case
Spindle sealing based on the gland principle
Assembly exercise for engineering training
The kit forms part of the assembly, maintenance and repair practice line.
It is used in the experiment of relationship between magnetic force of electromagnet and coil turns, relationship between polarity of electromagnet and current direction.
....
Standard commercially available flanged fittings: shut-off valve, non-return valve, strainer, condensation Drain, inspection glass, ball valve, gate valve
Ball valve with cutting ring screw fitting
Assembly exercise for engineering training
Mobile frame for mounting of pipe network
Connection to water supply via hose with coupling
Piping network comprising pipe bends, elbows, T-pieces and transitions in nominal
Pipe connections via flanges or cutting ring screw fittings
Pressure vessel with manometer, connection via.
Coverall has elastic openings for tighter fit at wrist and ankle
Bound neck for lower particle shedding
Front zipper closure for easy donning and doffing
Seeve design for greater range of motion and comfort
Clean-proceesed and sterile coveralls worn in controlled environments protect against particulates and other contaminants.
Clean-processed garments offer lowest level of particle shedding.
Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
Garments are gamma sterilized to SAL of 10-6
Full traceability on all sterilized apparel with sterility available.
Unit designed for desktop use
Functionality of moving parts preserved
Cutaway model of a pressure reducing valve
Mounted on demonstration panel; 500x400mm.
The electrical units have faults built into them, each onecontrolled by a switch on the fault panels. An 18V voltmeter, 60A ammeter,electronic tachometer and charge indicator are fitted to the control panel. This training aid is electrically equivalentto a standard motor car and provides an ideal means of instruction and trainingin all aspects of automotive electrical systems.
In all electrical aspects the simulatorbehaves like a standard motor car and normal test procedures may be carried outas on a car. This simulator is designed for maximumaccessibility, making it easy to demonstrate to students for the workingfunctions of the various components.
Mobile system for alignment of a standard pump and its drive motor
Electric motor with positioning frame and fit plates for alignment
Pump and motor connected via coupling
Asynchronous electric motor with constant speed
Pump with ball valves at inlet and outlet
Closed water circuit
Checking of alignment using straight-edge or dial gauges
Manometer at pump outlet.
Pressure sensors at both basins and the surge chamber capture the water Level fluctuations
Transient drainage processes in storage reservoirs
Functioning of a surge chamber
Gate in the drainage line for generating water hammer
Storage lakes" experiment: basin A and basin B are used as long-term Storage reservoirs, rectangular weir as overfall weir
Surge chamber" experiment: transparent pipe as surge chamber in Drainage line of basin B
Rainwater retention basin" experiment: basin A and basin B as short-term Storage reservoirs, rectangular weir as gate.
It consists of cylinder, base, end cap, piston and seal ring. The cylinder is made of organic glass, with length of cylinder 130mm, outer diameter φ25mm and inner diameter φ10mm. diameter of base is φ65mm, diameter of handle is φ40mm and diameter of piston is φ8mm. It is used to demonstrate experiment of “temperature increases with air is compressed”.
....
It consists of round box, metal rod, fixed clamp, and upper grooved wheel with knob, rubber belt, connected round box and latex tube with minimal piezometer. It is used to verify that inner pressure of liquid varies with the depth of object; the pressure to every direction is equidistant at the same depth place of liquid inner.
....
The trainer is built to help the student evolve from building basic circuits to more complex electrical troubleshooting. Due to the fact that the trainer is fully modular, additional can be added to follow technical evolutions in motorcycle and light vehicle industry. The Motorcycle Lighting And Accessory Systems Trainer contains OEM system components (application varies) mounted on modular plastic plates called where the student completes all of the system wiring. A built-in regulated and protected 12 power supply and fault box is included with the trainer for each side. The trainer is mounted single- or double-sided to allow more than one group of students to work simultaneously on the trainer.
Educational Advantages:
The trainer can provide multiple student work stations accessible from either side
Lighting and accessory systems respond to inserted faults (12) with real world symptoms
Students can build a complete motorcycle lighting or accessories circuit and simulate a switched-off immobilizer.
Investigate flow of compressible fluids
Transparent measuring objects with connectors for pressure measurement provide insight into the Internal structure
Pressure losses in subsonic flow in pipe elbows and various pipe sections
Measuring nozzle for determining the mass flow
Subsonic and transonic air flow
Variable speed on the radial fan for adjusting the mass flow
Record fan characteristic curve using a throttle valve
Digital displays for pressures, velocity and speed
Minimised turbulence by drawing in air and optimum arrangement of the measuring objects
Orifice for determining volumetric flow rate by differential pressure measurement
Pressure curve at subsonic and transonic nozzle flow.
This model provides several forward speeds and reverses, consisting of a front section and an auxiliary section. The auxiliary section contains LO and HI range ratios, and the L and H splitter gear ratios. The Cutaway Eaton Transmission Trainer has been designed for teaching Eaton heavy-duty transmission theory and operation. When in HI range, the gear ratios can be split by using the splitter control button. This model is driven by hand crank.
Educational Advantages:
Allows visualization of gear changes and clutch operation
Gear changes can be made using regulated air pressure and provided controls
Driven by hand crank.
The chassis includes an integrated floor stand that is mounted on wheels for mobility. Hydraulic Brake Chassis Trainer is designed for student skills training in the operation, installation, maintenance and repair of hydraulic brake systems. A color schematic chart of the brake system and circuit is mounted onto the trainer for reference. The unit consists of original automotive components which are mounted into a simulated model auto chassis.
....
The Allison is a fully automatic torque converter driven, electronically controlled 6-speed automatic transmission that is commonly used in coaches and heavy vehicles. The Cutaway Allison Transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and cutaway to allow students to visualize the internal transmission functions.
Educational Advantages:
Gear changes can be made using regulated air pressure and provided controls
Driven by hand crank
Allows visualization of gear changes, planetary gear sets and clutches.
Liquid Hugh to Wall Pressure Demonstrator
....
