Bourdon tube pressure gauge for pressure measurement
Hydraulic oil for transfer of the force
Hydraulic pump with storage tank and bleed mechanism
Transparent dial face with a view of the spring mechanism
Accurately fitting piston and cylinder of the piston manometer without seals.
Tiltable water tank with fill level scale
Lever arm with different weights
Investigation of the hydrostatic pressure in fluids at rest.
Electronic Automatic Transmission Rebuild trainer presents the rebuilding and service of Electronic Transmissions.
Features:
Stand Includes Component Storage and Drain Pan
Powder-Coated Frame Mounted on Casters
Recycled Transmission
Rebuild Stand allows 360 Rotation of Transaxle
Service Manual Available.
One Bourdon tube pressure gauge each for positive and negative pressure
Basic experiments for measuring pressure with three different measuring instruments
Plastic syringe generates test pressures in the millibar range
U-tube and inclined tube manometer.
For training purposes the cutaway uses manually controlled air pressure to apply and release the clutches and bands. The cutaway trainer demonstrates the internal operation of a automatic transaxle and permits the student to visualize and safely operate the system. This allows the cutaway transaxle to be easily shifted through all speeds.
Educational Advantages:
Gear changes can be made using regulated air pressure and provided controls
Driven by hand crank
Allows visualization of gear changes, planetary gear sets, clutches and bands.
The cutaway trainer demonstrates the internal operation of a 4X4 drivetrain with automatic transmission and permits the student to visualize and safely operate the system. This allows the cutaway transmission to be correctly shifted through all speeds. For training purposes the teaching aid uses an electronic speed selector with lamps to show the applied and released clutches and bands.
Main Features:
Driven by 120VAC electric motor.
Gear changes can be made using an electronic speed selector with lamps to show the applied and released clutches and bands.
Transfer case can be shifted electronically.
Allows visualization of gear changes, planetary gear sets, clutches, bands, transfer case power flow, differential function and limited slip differential function (clutch type).
This custom trainer can be designed to incorporate any application that meets your needs. The Cutaway Custom Manual Transmission Transaxle can be equipped with OEM components from any vehicle of your choice.
Main Features:
Traditional, automated manual, sequential manual, dual clutch, DSG (direct shift)
FWD, RWD, 4WD or AWD
Driven by hand crank or electric motor can be shifted manually
With or without functional hydraulic or cable operated clutch system
With or without differentials as applicable (limited slip or open).
Two styles available
Surveyors Vest
Surveyor-style front pockets
Large arm holes
Zipper closure
100% polyester tricot
Two-tone striping with 2 in. wide (5.1cm) silver reflective tape
Color: Yellow
Standard Vest
Hook-and-loop closure
Machine-washable
Bright, lightweight polyester tricot fabric
2 in. wide (5.1cm) strip of reflective material—two 360° horizontal stripes and two vertical shoulder stripes
Color: Yellow.
It has two handles representing the steering wheel and steering column. The Cutaway Electric Assist Power Steering Cutaway Electric Assist Power Steering, allows the student to understand the basics of an electric assist power steering as used in today's vehicles.
Educational Advantages of Cutaway Electric Assist Power Steering
Demonstrates torsion bar and torque sensor function.
Allows the student to understand the basics of an electric assist power steering.
Features elastic trimmed ends and tapered length for proper fit
Suitable for exposure to bloodborne pathogens, non-hazardous liquids and any wet general maintenance areas
Non-linting Environstar-MP fabric is constructed from unique laminated and breathable membrane
Lint free polyethylene and polypropylene sleeves for use in critical, ESD and low particulate clean environments.
Length: 18 in.
White in color.
A small-scale multi-stage centrifugal compressor demonstration unit, comprising of an inlet duct, the compressor, an outlet duct and an adjustable aperture, all mounted on a stainless steel base.
Equipped with electronic measurement sensors for head pressure, flow rate (via orifice plate) and air temperature.
Seven stages in the compressor.
Full theoretical back-up together with a student questions and answers session.
Supplied with software providing full instructions for setting up, operating, calibrating and performing the teaching exercises. Facilities for logging, processing and displaying data graphically.
Capable of being linked to a PC (not supplied) via a dedicated interface console (an essential accessory).
Pressure Pressure Demonstrator
....
Distance between balance pan and knife edge: 285mm.
Quadrant, 75mm internal radius, 150mm outer radius, 60mm width.
Balance arm.
Balance pan.
Beam level indicator.
Water tank, Perspex, capacity: 10 liters with level adjustment support screws at the base.
Set of standard weights.
Spirit level.
Adjustable counter-balance.
Computer based learning software.
Overall dimensions: Height: 0.45m, Width: 0.3m, Length: 0.55m.
Services required: Water supply and drainage.
The cutaway trainer demonstrates the internal operation of a 4WD drive train with manual transmission and allows visualization of gear changes, transfer case power flow, clutch function, differential function and limited slip differential function (clutch type).
Main Features:
Gear changes can be made using OEM shifter
Transfer case can be shifted electronically
Complete hydraulic clutch system with master/slave cylinders and clutch pedal.
Driven by 120VAC electric motor;
Allows visualization of gear changes, clutch function, transfer case power flow, differential function and limited slip differential function (clutch type).
Spindle pump for pressure generation and fine adjustment.
Piston allows calibration over a wide range of pressures.
This unit allows pressure gauges to be accurately calibrated up to 300 bar, with an accuracy of +0.015%.
Priming pump.
A spirit level (or bubble level) and rotating foot studs are provided to enable the student to level the unit.
Laboratory calibration certificate.
Mineral oil is used as the hydraulic fluid.
Carrying cases for the unit and weights.
A set of weights, a set of adapters for the pressure gauges, spare seals and a bottle of oil are supplied.
These sources provide low or high flow rates that may be controlled by a valve at the discharge end of the test pipe. Head loss between two tapping points in the test pipe is measured using two manometers, a water over mercury* manometer for large pressure differentials and a pressurized water manometer for small pressure differentials.
The Energy Losses in Pipes accessory made up of a test pipe, orientated vertically on the side of the equipment, which may be fed directly from the Hydraulics Bench supply or, alternatively, from the internal constant head tank.
Water discharging from the head tank is returned to the sump tank of the Hydraulics Bench.
Features:
Feed either direct from hydraulics bench or from constant head tank.
Fast release fitting for easy connection to hydraulics bench.
Vertical test pipe with pressure tappings at entry and exit.
Water and mercury manometers supplied as standard.
The trainer has also been strategically sectioned and cutaway to allow students to visualize the internal engine and transmission components, and the variable timing and valve lift electronic control system. The Cutaway Engine And Transmission 1.8l Trainer has been specifically designed for demonstrating the operation of a 1.8L engine with transmission, shift lever and the iVTEC (Variable Valve Timing And Lift Electronic Control) system which is operated by regulated air pressure.
Advantages:
All OEM components
Functional iVTEC system operated by regulated air pressure
Driven by electric motor
Functional hydraulic clutch and shifter
Completely enclosed for safe observation.
This custom trainer can be designed to incorporate any application that meets your needs. The Custom Cutaway Automatic Transmission Transaxle can be equipped with OEM components from any vehicle of your choice.
Advantages:
Automated manual transmission/transaxle
With or without differentials as applicable (limited slip or open)
FWD, RWD, 4WD or AWD
Electronic or non-electronic models
Driven by hand crank or electric motor
Gear changes can be made using regulated air pressure and provided controls.
Large blue gowns feature easy tear-away for quick gown removal and safe disposal
Easy tear-away feature for quick gown removal and safe disposal
Contoured thumb loops secure gown sleeve for added protection
Redirects stress to the film material not the thermal seals to minimize breakage potential
Full-length open back affords better comfort and shoulder coverage
Provides liquid and aerosol blood resistance
Lightweight, non-linting construction
In compliance with FDA requirements and tested in accordance with ASTM standards including breaking load, tensile strength and elongation
Successfully tested for liquid and aerosol blood resistance under ASTM F 1670 In compliance with bloodborne pathogen standards levels 1 & 2 barrier protection
Superior physical properties over imports
Synthetic Blood Penetration Resistance and ASTM F 1671 Bacteriophage Penetration Resistance.
The equipment is mounted on a free-standing framework which supports the test pipe work and instrumentation. These tappings are connected to a bank of twelve water manometer tubes, mounted on the framework. The following typical pipe fittings are incorporated for study: mitre bend, 90o elbow, sweep bends contraction and sudden enlargement. Pressurization of the manometers is facilitated by a hand pump. All are instrumented with upstream and downstream pressure tapping. A gate valve is used to control the flow rate. A separate gate valve is instrumented with upstream and downstream pressure tappings which are connected to a differential gauge on the edge of the framework.
....
