The Scissor Lift equipment is used for lifting the automobile which is used together with wheel Aligner.
....
The load is applied by a hand pump, and is measured by a high precision electric load cell with a digital display unit range 0-56 KN. Portable Digital Press 56KN Capacity Used for compression tests on small cylinder specimens and core samples up to dia. 60x100 mm. Providing:
0,001 KN resolution
65.000 divisions
Hysteresis: 0,03%
Repeatability: 0,02%
Linearity: 0,05%.
Activated Sludge Process enables this process to be demonstrated. A pump delivers raw water contaminated with dissolved organic substances (organic matter) into the aeration tank. Since aerobic microorganisms need oxygen, the raw water is aerated in the aeration tank. The activated sludge is mixed with the raw water by stirring machines. In the secondary clarifier the activated sludge is then separated from the treated water by sedimentation. The activated sludge process is the most important biological process in water treatment. Aerobic microorganisms (activated sludge) in the aeration tank use the organic matter as a source of nutrition, biodegrading it in the process. A portion of the activated sludge is returned to the aeration tank (return sludge). The treated water is collected in a tank. Oxygen concentration, pH-value and temperature can be controlled. The following flow rates are adjustable: raw water, return sludge, internal recirculation for pre-denitrification and air.
....
Analytical Process Control Learning System allows learners to explore a wide range of analytical process control topics, including analytical process control, pH electrodes, pH meters and transmitters, loop controllers, and many more. Analytical Process Control Learning System covers major topics and skills involved with controlling and modifying the chemical properties of a substance, which is important to industries such as pharmaceutical companies, beverage companies, and refineries.
These analytical chemical process skills will prepare learners for industrial process applications that theyll see on the job. The Analytical Process Control Learning System process control simulator includes a tabletop workstation with a control panel, PLC interface, and industrial pumps, tanks, and piping. Learners will use these components to perform skills such as manually setting and controlling an electronic metering pump, testing the pH of a solution using pH test strips, and connecting and operating a continuous loop pH control system.
Features:
Piping By-Pass Network
Injector and Metering Pumps
Continuous Stirred Tank Reactor (CSTR)
PH Transmitter and Probe
Student Reference Guide
Option: Advanced Analytical Control Module
Optional Online eBooks.
Integral duplex thermocouples record all relevant system temperatures and are connected to a multi-way selector switch and digital temperature indicator.
A bench mounted, belt driven, single stage reciprocating air compressor with a motor dynamometer allowing measurement of the motor shaft power.
Intake and discharge air pressures are measured together with the air flow rate, motor drive speed and torque.
An optional computerized data acquisition upgrade is available that allows all relevant system parameters to be automatically recorded on a PC.
An intake vessel reduces intake air pulsations and a high pressure air receiver is connected to the compressor discharge.
The unit is supplied with a detailed experimental operating and maintenance manual giving example experimental results and sample calculations.
The unit has an integral liquid crystal display with a scroll switchthat allows all 32 channels to be viewed in groups of four at any time. Theconditioned outputs of the pressure sensors, and any other connected compatibleelectronic instruments, may be output to Versatile Data Acquisition System toallow computer based data acquisition and display. The 32-Way Pressure Display Unit is an optional ancillary tomodular Subsonic Wind Tunnels. The unit mounts onto the control and instrumentationframe of the wind tunnels. Connection to each of the 32 calibrated pressuretransducers is via quick-release pressure inputs mounted on the front panel ofthe unit. It measures and displays up to 32 pressures frommodels, Pitot-static tubes and other measuring instruments fitted to a windtunnel. It is ideally suited to applications where multiple pressuremeasurements are required, for example in boundary layer and tapped aerofoilmodel investigations. This allows easy and quick connection between the unit and anexperiment mounted in a wind tunnel. When the 32- Way Pressure DisplayUnit is used with the system it allows laboratory time to be used more efficientlybecause data can be captured and processed much more quickly than when usingmanual techniques. All pressures are measured with respect toatmosphere. Using enables accuratereal-time data capture, monitoring, display, calculation and charting of allrelevant parameters on a suitable computer. This option providessignificant experimental advantages over conventional instruments such asmanometers. The facility in the software to average data to remove thefluctuations inherent in wind tunnel measurements enhances the quality of theresults by making their interpretation much easier.
....
he main part is a rigid metal frame. Supplied as standard are two adjustable knife edges that work as simple supports for test beams. Students add differentloads to the beams using weights on a hanger. The dial gauge indicator on theback panel accurately measures beam deflection. A compact bench-mounting frame that holds different partsfor investigations into stiffness of materials. A linear scale on the back panel of the frame allows accurate positioning of the knife edges. The kit also includes weights, a magnetic dial gauge and a set of differentbeams. Also included in the standard kit is a vernier gauge for students toaccurately measure dimensions of the specimens they test. The standard includes parts fortests in bending of beams of different materials and cross-section. Optional additional kits allow investigations into different beam fixings and torsional stiffness. The AdditionalTorsion Testing Kit is also available as an optional extra. It allows torsiontests on solid rods of different materials and a tube. The Additional ExperimentationKit available as an optional extra, enables further investigations into asimple cantilever, a propped cantilever and an encastre beam.
....
A computer interface unit and software are provided. The Strain And Stress Of Material Computer Interface set has the same accessories as except Load hanger and weights are replaced by Vertical Force Load Cell.
....
Centre Of Percussion includes a metal pendulum to provide the percussion force and a wooden pendulum to absorb the impact. The wooden pendulum forms a suspended mass, similar to a bat held underhand. Centre Of Percussion fits to the sturdy Test Frame for study or demonstration. It is the impact position which allows no reaction in the hand of the user, which would otherwise create uncomfortable shocks in their arm and wrist. A centre of percussion may also be termed the sweet spot of the impact of a ball against a bat or racquet.
This product is part of a range that explores free vibrations in simple one degree of freedom systems. It introduces students to key scientific terms such as:
Centre of gravity
Centre of percussion and the sweet spot
Simple harmonic motion and period of oscillation
Impact reactions
Radius of gyration.
Experiments:
Demonstration of centre of percussion of a compound pendulum
Centre of gravity, period of oscillation and radius of gyration of a compound pendulum
The Single Stage Air Compressor Test Set Air Cooled is for studying the single stage reciprocating air compressor characteristics. The air receiver has a safety valve, a drain valve and a discharge valve. The unit is equipped with necessary measuring instruments and is on wheels. An industrial type compressor is driven via a vee-belt by a motor with an advanced inverter.
Experiments:
Effect of compressor speed.
Compressor characteristics eg. volumetric efficiency, isothermal efficiency, pressure ratio, temperature ratio.
Incorporates a low pressure steam feed line including a VeeReg isolating valve, a 1 to 3 bar pressure reducing valve, a pressure relief valve set at 3.5 bar and temperature and pressure measuring points; a process fluid circuit constructed from high strength borosilicate glass components, including a reboiler equipped with a temperature measuring point, a separator with a rubber filler stopper and outlet baffle plate, a condenser, a drain valve, joint couplings and joint gaskets, reboiler blowdown pipework fitted with a flexible stainless steel braided hose complete with boiler joint adaptor flange and including a Vee-Reg isolating valve, steam trap and non-return valve; condenser cooling water feed line complete with control valve and pressure measuring point and cooling water drain line with non-return valve and pressure safety valve, set to vent at 2.5 bar. Process Plant Steam Bench consists of a sturdy framework and panels of all steel construction, fitted with a student work surface, interconnecting back panel and adjustable feet.
Experimental Capability:
Demonstration of cumulative effect on thermosyphon reboiler boiling rate, and of the boiling off of process fluid lighter fractions.
Demonstration of a thermosyphon reboiler, using water as the process fluid and steam as heating fluid.
The self-contained unit can do many experiments, but it can also connect to other products in the range for extra experiments. For cascade control of flow and pressure, it can link to the optional Pressure Process Training System. The Flow Process Training System is a compact and mobile unit for a wide range of experiments in flow control. It gives students a greater understanding of the stability of simple control systems. For distributed control, it can connect to the optional Computer Control System. For cascade control of flow and level, it can link to the optional Level Process Training System.
The main parts are:
A gap-type (rotameter) flow meter
Fixed orifice and pressure transmitter
Industrial controller with auto-tune feature
Two-channel chart recorder
Three-speed pump
Pneumatic control valve
Reservoir.
Electrocardiographs are used to diagnose cardiac abnormalities, determine a patient's response to drug therapy, and reveal trends or changes in heart function. Multichannel electrocardiographs record and display signals from two or more leads simultaneously. Electrocardiographs differ from ECG monitors, which provide a continuous real-time display of the ECG waveform and other physiologic measurements on a screen and warn of potentially life-threatening or precursor rhythms.
Electrocardiographs detect the electrical signals associated with cardiac activity and produce an ECG, a graphic record of the voltage versus time. They are used to diagnose and assist in treating some types of heart disease and arrhythmias.
Container, round.
Smooth surface.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18-20% chromium, 8-10% nickel.
Reusable.
Capacity: approx. 550 - 650 ml.
Inner diameter: approx. 115-135 mm.
Height: approx. 50-70 mm.
Thickness: approx. 0.75-0.85 mm.
Scratch resistant; absorb >99.9% of harmful UV light
Molded-in side shields and brow guards for added protection against UV, dust and flying particles
Lightweight, impact-resistant nylon frames
Adjustable temples and lens inclination.
One-piece, clear hard coat polycarbonate lens for maximum protection.
-lab-590398559.jpg "Gas Chromatograph With Triple Quadrupole Mass Spectrometer Detector (GC-MS-MS)")
Gas Chromatograph With Triple Quadrupole Mass Spectrometer Detector (GC-MS-MS)
....
Full Biology Class Equipment Including Microscopes
....
Set of 12 Harmonic Springs With Different Stiffness
....
Classroom DNA Electrophoresis Lab Station
....
