Computer interface unit and software are included. The Continuous Beam Computer Interface set has the same accessories as Vertical Force Supports are replaced by Vertical Force Load Cells with digital indicators.
....
Computerized Fixed Bed Plant For The Adsorption In The Gaseous Phase is supplied with an adsorption column filled with activated carbons, into which a stainless steel coil is immersed. Computerized Fixed Bed Plant For The Adsorption In The Gaseous Phase unit has been designed for the development of gas adsorption and deadsorption processes. The unit enables to check all the process characteristic parameters in such a way to realize work complete cycles. The unit is made of borosilicate glass as this latter is particularly suitable for its operating characteristics and also of stainless steel. The coil terminals can be connected to an external refrigeration or heating circuit according to the process to be realized. The computerized version unit allows, thanks to the electronic transducers and suitable software, to display on personal computer and/or print the tables of results and diagrams of the various experiments. The particular construction of the column allows the classic adsorption material (activated carbon) to be replaced with others such as silica gel, molecular sieves, activated alumina, or others for experiments concerning gas de-hydration.
....
Computer interface unit and software are included. The Three Hinged Arch Computer Interface set has the same accessories as except Horizontal Force Support is replaced by Horizontal Force Load Cell.
....
mm/inch
Throat clearance: 380/15
Spindle vertical movement: 25/1
Work table size: 355x355/14x14
Up/down movement of table: 125/5
Routing work table size: 610x420/24x161/2
Table tilt degree: 15
Spindle speed (rpm): 11000
Power required hp/rpm: 1.5/2800
A computer interface unit and software are included. The Simple Suspension Bridge Computer Interface set has the same accessories as except Vertical Load Cell is used instead of load hanger and weights.
....
Cooling plant at teaching and industrial level, with modular design, and computer controlled.
Plant with ice store, wet cooling tower and dry cooler.
Main metallic elements in stainless steel.
Diagram in the front panel.
The different units (modules) connected with hoses.
Anodized aluminium structures and panels in painted steel.
Wet cooling tower.
Dry cooler.
Using valves different operating modes can be configured.
Refrigeration circuit (condenser, evaporator, compressor) and pumps.
Manometers.
Temperature sensors.
Flow sensors.
Ice tank.
Liquid tank.
Wattmeter.
Refrigerant R134a.
Connecting hoses.
High pressure control.
Pressure sensors.
Adjustment elements.
Unit-lab-1422168244.jpg "Wireless Router ( CPE ) Unit")
Wireless Router ( CPE ) Unit
....
Computer interface unit and software are included. The Two Hinged Parabolic Arch Computer Interface set has the same accessories as except Horizontal Force Support is replaced by Horizontal Force Load Cell.
....
The Torsion Of Rods And Tubes Computer Interface set has the same accessories as except Dial Indicator is replaced by Digital Indicator with output. Software is provided.
....
Computer interface unit and software are included. Universal Structural Frame or Universal Base Frame, Force Indicator and computer are required but separately supplied. The Shear Force And Bending Moment Computer Interface set has the same accessories as except two spring balance are replaced by two load cells.
....
The is designed to connect to the to expand the experimental capability.
The has been designed and manufactured to incorporate all current safety standards.
A Computer Controlled Thermodynamic Cycle of a Screw Compressor training plant for studying the energy transfer in a compressed air system.
It includes industrial sensors and transducers.
The is controlled by a PC and software.
Experiments:
Determining the polytropic index
Calculating the effective average pressure of the compressor
Analysing the pressure / volume diagram of the first and second stages of the compressor by experiment
Checking the operation of the safety devices:
For detailed study of the air characteristics it is necessary to connect the ACV85 to the ACV90 Compressed Air Dehumidification Training Plant
Using a T-s diagram for air to determine the characteristics of the thermal cycles by experiment.
The Computerized Boiling Point Heat Transfer Unit is designed to display the various types of boiling to change the intensity of the heat flow. The experiment is performed with environmentally-friendly, special low boiling point liquid. A transparent vessel allows to observe the evaporation process at the heated cylinder. More precisely, can be reproduced the nucleate and the film boiling and it can plot the so-called pool boiling which is the basis of the design of the systems with the steam boiler. The cylinder operates as a fire tube heated from the inside. An integrated water-cooled condenser allows for a continuous boiling process. The unit is supplied with manuals that describe each component of the system, installation and utilization procedures and give many exercises. The special liquid used evaporates at low temperatures. An automatic data acquisition and analysis system for Personal Computer allows to take the measurements automatically, to plot the curves on screen or print them out, to store the experimental data on disk or print them.
....
A computer interface unit and software are provided. Universal Structural Frame Force Indicator and computer are required but separately supplied. The Forces In Truss Computer Interface set has the same accessories as except load hanger with weights and Dial Indicator is replaced by Vertical Force Load Cell with dial indicator.
....
Deflection Of Frames Computer InterfaceThe Deflection Of Frames Computer Interface set has the same accessories as except Moment Support is replaced by Moment Load Cell Horizontal Force Support is replaced by Horizontal Force Load Cell Dial Indicator is replaced by Digital Indicator.
Software is included.
-lab-1057443369.jpg "Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Laws)")
Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Laws)
....
The Computerized Refrigeration Study Unit With Mass Energy Balance is an extremely easy-to-use and functional unit able to permit the study of a compression frigorific cycle and the evaluation of the cycle efficiency and the energy balance at the evaporator and at the condenser. A front panel with mimic diagram and instrumentation allows to keep the most significant thermodynamic quantities under control, so facilitating the students understanding and the teachers task. The unit is supplied with manuals which describe the components, the installation and utilization procedures as well as many exercises with experimental results. Moreover, the transducers and the dedicated software allows the data acquisition of the main thermodynamic quantities and to obtain or as a table or as a graph, the acquired values and the thermodynamic calculated quantities. The unit allow the study of the main thermodynamics quantities as a function of the thermal load at the evaporator and the calculation of the power required at the compressor shaft.
....
Bench-top unit.
Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Anodized aluminum structure and panels of painted steel.
Air condenser.
High pressure control.
Coolant accumulation tank.
2 Manometers.
Coolant compressor, computer controlled.
Evaporator-freezer, with two freezing plates of 180 mm x 280 mm. One freezing plate is fixed and the other one is height adjustable.
Four-way valve.
Expansion valve.
6 Temperature sensors, type J (temperature measurement of the food).
8 Temperature sensors:
2 Temperature sensors, type J (temperature measurement of the coolant).
The Computer Controlled Torsional Vibration Unit is an unit designed to study the torsional vibration, the torsional stiffness and the behaviour of a torsional vibration system with two and three torsional weight vibrator.
Vibrations are transmitted into the torsion bar by means of an electrical motor, which speed is computer controlled. The bar is supported by the base with movable pillars.
An adjustable damper can influence in the vibrations. Shaft encoders on the chucks provide the amplitude of vibration as an electrical signal.
Rigid weight discs, of several diameters and inertia, and pivoting bearings can be located at unlimited positions along the bar.
To facilitate the theoretical comprehension, the exercises are made with a metal torsion test bar, the main element of the unit.
Weight discs can be fixed to the bar with the aid of chucks and flanges; this way, it is possible to assemble torsional vibration systems with one, two or three weights.
Computer interface unit and software are included. The Virtual Work Computer Assist set has the same accessories as except Moment Supports are replaced by Moment Load Cells, and Vertical Force Support is replaced by Vertical Force Load Cell.
....
For gripping and immobilisation of thick tissue (uterine traction forceps).
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0-15-0.20% carbon, 12-13% chromium.
Hard ratchet, lockable.
Pressure force instrument: gripping forceps, springy.
Uterine traction forceps, vulsellum / tenaculum, double curved.
Length: 28 cm.
Reusable.
