Well Bore Hydraulic Demonstrator is designed to replicate many of the hydraulic conditions encountered in drilling operations. The Well Bore Hydraulic Demonstrator is a valuable tool for training process operators. These conditions are produced in a replica well-bore manufactured from industrial clear PVC that allows students to observe the flow patterns.
The Well Bore Hydraulic Demonstrator is equipped with process indication and manual control devices including metering valves and pressure gauges. Oil water and air represent the three common well-bore fluids liquid hydrocarbons, gaseous hydrocarbons, and produced water. The process fluids are recycled allowing for continuous operation without the discharge of either the oil or the water. The Well Bore Hydraulic Demonstrator is controlled by manually adjusting the various flow control valves.
Function:
The operator has control over several aspects of the flow inside the well-bore; the flow direction fluid flow rates, and the distance that the tubing is above the bottom of the hole. Throughout the well servicing and well production phases, the operator will create different flow patterns in the well-bore. The operator must balance these parameters to successfully achieve:
Containment of hydrocarbon-contaminated water
Control liquid flow rates
Positive control of well pressure
Safe Drilling and Servicing Operations
Containment of gas and liquid kicks
The All Day Sleeve offers ANSI A2 cut resistance and is made out of recycled water bottles. Features an inner cotton liner for comfort, elastic on both ends, and is latex free.
High strength All Day fiber provides superior snag, tear, and abrasion resistance
Free of harsh dyes, chemicals, and latex
Lightweight construction provides all day comfort and fit
Elastic on both ends hold sleeve in place and cotton inner layer for added comfort
Protect arms and the environment with cut resistant sleeves made of recycled material that would normally go to the landfill
Not intended for use around sparks and flames.
Three lengths are available depending on the length needed for protection
Available with or without a thumb hole.
Men's Performance Work Socks provide support and protection for your feet while you work.
Socks feature reinforced heel and toe as well as an Achilles heel pad for added protection and comfort.
The socks non-binding top do not slip down and provide all-day gentle comfort.
The mesh upper foot is designed for ventilation and moisture evaporation, keeping your feet dry throughout the day.
Added compression at the arch provides added support and stability.
Made of a combination of high performance materials and flame resistant fibers, which will allow it to be used where incidental protection against flame and sparks are required.
Unique knit sleeve made from a patented combination of high performance materials and flame resistant fibers
Elastic on both ends allows sleeve to stay in place
Knitted using strong para-aramid yarns
Lightweight construction will increase employee acceptance and reduce the risk of injury
Composite Cut-Resistant FR Sleeves offer a high level of cut protection, while also providing outstanding comfort and fit.
Blousy fit allows superior comfort and breathability
Available in several lengths, with or without a thumb hole, and also a wide top design for larger biceps.
Material: Polypropylene
Color: White
Cuff Style: Elastic
Disposable: Single-use
Closure Type: Snaps
Seam Type: Serged
Size: X-Large
For Use With (Application): Manufacturing, pharmaceuticals, cleaning, lab work.
High level of comfort and breathability
Offer lightweight protection against dry particulates, keeping dirt and debris off the body or in the suit
Full length zipper front for easy donning
White.
Available in two styles: open wrists and ankles or elastic wrists and ankles to keep dirt and debris out.
Cost-effective standard-weight spun bond polypropylene coverall.
Material: Polyethylene, Polypropylene
Color: White
Size: 2X-Large
Cuff Style: Elastic
Neck Style: Hooded
Waist Style: Elastic
Ankle Style: Elastic
Hood Type: Elastic
Seam Type: Serged.
Material: Polypropylene
Ankle Style: Elastic, Attached Boots
Cuff Style: Elastic
Neck Style: Hooded
Size: X-Large
Color: White
Closure Type: Zipper
Waist Style: Elastic
Hood Type: Attached
Seam Type: Serged.
Ideal for use in food service, food prep, manufacturing, and retail applications
Elastic band for flexible fit
Nylon hairnets feature an elastic adjustment and is available in 18 in. or 21 in. diameter.
Nylon hairnet
Available in 18 in. or 21 in. sizes
White.
Wet and Dry Bulb Thermometer
....
Water circuit with pump, filter, valve and a nozzle as atomiser
Three-stage heater with thermostat for water heating
Principle of a wet cooling tower with cooling column and forced ventilation
Radial fan for forced ventilation
Tank for additional water compensates for water loss
Display of temperature, differential pressure, flow rate and humidity
Throttle valve to adjust the air flow
Demister unit at the outlet of the cooling columns minimises water loss
Interchangeable cooling columns with different wet deck surfaces available as accessories.
Additionally, this reduces theconsumption of fuel. The wetstarting clutch is a clutch with a low rotary inertia, making the automatictransmission extremely spontaneous and dynamic without the losses that aretypical of power transmission equipment.
....
Feed tank with a capacity of 45 litres.
Deoxygenation column manufactured from Plexiglas with a height of 1,600 mm
Pump for absorption column.
Pump for deoxygenator.
Wetted wall column of height 900 mm and inside diameter 34 mm.
Air compressor.
2x industrial oxymeters 0 to 20 mg per litre or 0 to 200% with a resolution of mg/l or 0.1% SAT.
2x industrial measuring sensors for dissolved oxygen.
Variable area flowmeter for water with glass tube and a range of 1.9 to 19 litres per hour.
Variable area flowmeter for air with glass tube and a range of 30 to 300 litres per hour.
Emergency stop button
Electrical control panel in main cabinet.
Power Supply: 230 Vac 50 Hz single-phase 1500 VA.
Comprises both wetted wall column and a deoxygenating column, a water tank, two water pumps, an air pump and an oxygen meter with two probes.
A floor standing apparatus, used for demonstration and determination of liquid film mass transfer coefficients.
The deoxygenating column is 1570mm long, 26mm internal diameter, and made of clear acrylic.
The wetted wall section is 900mm long, 32mm internal diameter, and made of glass.
The equipment is used to study absorption of oxygen from air into deoxygenated water, specific demonstrations include:
Calculation of liquid film mass transfer coefficient
Determination of the power law relationship
Variation of this coefficient with mass flow rate.
Wheat Harvester Model Cutaway is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits. This is a model of a Wheat Harvester machine. Wheat Harvester Model Cutaway clearly shows the combine harvester main elements. Many parts have been chromium-plated and galvanized for a longer life.
....
The Wheel Aligner equipment is used for detecting the alignment parameters of the automobile wheel, and comparing with the original design parameters, guiding the users to adjust the wheel alignment parameters accordingly.
Features:
Adopt Inclination sensor, Bluetooth wireless communication
High accuracy and high speed
Easy operation and learn.
Adjustable thrust angle
Adjustable steering angle
Adjustable camber angle
Adjustable Toe-in & Toe-out
Full size or shorter wheel base
Each vehicle has fully operational and adjustable suspensionsystem, rear axle, steering system, steering wheel, rims and tyres.
Wheel and Axle Apparatus Using the hangers and weights allows the experimental determination of velocity ratio and comparison with calculated values. The dual diameter wheel has an axle supported on simple pivots in a sturdy wall mounting bracket. A load hanger is added to each cord allowing loading of the wheels using the calibrated weights set provided. Students can also determine the variation of effort with load and the variation of efficiency with load. Each wheel has a cord wrapped around its periphery. The cords can be wrapped in either direction around each wheel.
Experimental Capabilities:
Determination of variation with load of effort
Determination of variation with load of efficiency
Experimental determination of velocity ratio and comparison with calculated value.
